|
|
|
MAX14585, MAX14585A
Hi-Speed USB and Audio Switches with Negative Signal Capability and High-Voltage-Tolerant VBUS Detection
Small, High-Performance USB Switches Integrate Low Power and High-ESD Protection
|
Status
Active: In Production.
Description
The MAX14585/MAX14585A high-ESD-protected double-pole/double-throw (DPDT) switches multiplex Hi-Speed (480Mbps) USB and analog signals such as AC-coupled audio or video. These devices combine the low on-capacitance (CON) and low on-resistance (RON) necessary for high-performance switching applications in portable electronics and include an internal negative supply to pass audio signals that swing below ground down to -1.8V. The devices also handle USB low-/full-speed signaling and operate from a 2.7V to 5.5V supply.
The devices feature a VBUS detection input (VB) that can handle voltage up to 28V to automatically switch to the USB signal path upon detection of a valid VBUS signal (VB > VVBDET). In a dead battery situation, the voltage on VB can supply power to the part if VB is greater than 4.5V. The MAX14585 features internal shunt resistors on the audio path to reduce clicks and pops heard at the output.
The MAX14585/MAX14585A are available in a space-saving, 10-pin, 1.4mm x 1.8mm UTQFN package and operate over the -40°C to +85°C temperature range.
|
|
Data Sheet
|
An evaluation kit is available: MAX14585EVKIT
Key Features
- Low Power Consumption
- Low Supply Current 7µA (typ)
- Single 2.7V to 5.5V Supply Operation, VCC
- Flexible Design
- Dual Power-Supply Architecture, VB and VCC
- ANO_ Channel Override Control Input
- High Level of Integration for Performance
- 28V-Capable VB Input with Automatic UNC_ Selection by VBUS Detection
- Low-Capacitance Hi-Speed USB for Both Channels (UNC_ and ANO_)
- Distortion-Free Negative Signal Throughput Down to -1.8V on ANO_ Channel
- 3Ω (typ) On-Resistance
- 960MHz Bandwidth
- 0.04% THD+N Audio Channel
- ±15kV Human Body Model (HBM) ESD on COM1, COM2
- Saves Board Space
- Internal Shunt Resistor Reduces Clicks and Pops (MAX14585)
- 10-Pin, 1.4mm x 1.8mm UTQFN Package
|
|
Applications/Uses
- Cell Phones
- PDAs and Handheld Devices
- Tablet PCs
|
|
|
|
Key Specifications:
| Switches and Multiplexers (Low Voltage) |
| Part Number |
Protocol |
Config. |
Channels |
VSUPPLY (Single)
(V) |
VSUPPLY (Single)
(V) |
VSIGNAL
(V) |
VSIGNAL
(V) |
Dynamic Range (max)
(V) |
RON
(Ω) |
RFLAT(ON)
(Ω) |
RFLAT(ON)
(Ω) |
BW
(MHz) |
tON
(ns) |
tOFF
(ns) |
CON
(pF) |
COFF
(pF) |
Budgetary Price |
| min |
max |
min |
max |
max |
max |
typ |
max |
min |
max |
max |
max |
See Notes |
| MAX14585 |
|
|
2 |
2.7 |
5.5 |
-1.8 |
3.6 |
5.4 |
6 |
0.04 |
0.2 |
950 |
120000 |
40000 |
6.8 |
2.5 |
- |
| MAX14585A |
- |
|
See All Switches and Multiplexers (Low Voltage) (186)
|
Pricing Notes:
This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific prices and delivery, please see the price and availability page or contact an authorized distributor.
|
|
Diagram
Typical Operating Circuit
Product Guides
Reliability Reports
| Show FIT data for: |
|
| Request Reliability Report for: |
|
Software/Models
Ordering Information
|
Part Number
|
Free
Sample |
Buy |
Status
|
Package:
TYPE PINS FOOTPRINT
DRAWING CODE/VAR *
|
Temp |
RoHS/Lead-Free?
Materials Analysis
|
| MAX14585AEVB+
|
|
|
Active |
UTQFN;10 pin;2.5 mm²
Outline Drawing:21-0028 (PDF)
Land Pattern: 90-0287 (PDF)
Use pkgcode/variation: V101A1CN+1*
|
-40°C to +85°C
|
RoHS/Lead-Free: Lead Free
Materials Analysis |
| MAX14585AEVB+T
|
|
|
Active |
UTQFN;10 pin;2.5 mm²
Outline Drawing:21-0028 (PDF)
Land Pattern: 90-0287 (PDF)
Use pkgcode/variation: V101A1CN+1*
|
-40°C to +85°C
|
RoHS/Lead-Free: Lead Free
Materials Analysis |
| MAX14585EVB+
|
|
|
Active |
UTQFN;10 pin;2.5 mm²
Outline Drawing:21-0028 (PDF)
Land Pattern: 90-0287 (PDF)
Use pkgcode/variation: V101A1CN+1*
|
-40°C to +85°C
|
RoHS/Lead-Free: Lead Free
Materials Analysis |
| MAX14585EVB+T
|
|
|
Active |
UTQFN;10 pin;2.5 mm²
Outline Drawing:21-0028 (PDF)
Land Pattern: 90-0287 (PDF)
Use pkgcode/variation: V101A1CN+1*
|
-40°C to +85°C
|
RoHS/Lead-Free: Lead Free
Materials Analysis |
Notes:
- Other options and links for purchasing parts are listed at: http://www.maxim-ic.com/sales.
- Didn't Find What You Need? Ask our applications engineers. Expert assistance in finding parts, usually within one business day.
- Part number suffixes: T or T&R = tape and reel; + = RoHS/lead-free; # = RoHS/lead-exempt; -D = drypack; -U/+U on DS parts = cut tape. More: See Full Data Sheet or Maxim Product Naming Conventions.
- * Some packages have variations, listed on the drawing. "PkgCode/Variation" tells which variation the product uses. Note that "+", "#", "-" in the part number suffix describes RoHS status. Package drawings may show a different suffix character.
|
Similar Products by Function
Similar Products by Application
| Smartphones and Cellular Handsets > USB |
| Tablets > USB |
Evaluation Kits
Products with Similar Part Numbers
More Information
Didn't Find What You Need?
Information Index
Document Ref.: 19-5878
Rev 0;
2011-06-22
This page last modified: 2011-08-05
|
|
|
Download
E-Mail