|
DS24B33
1-Wire 4Kb EEPROM
With a Single Dedicated Contact, Easily Add EEPROM to Cables and Sensors to Store Nonvolatile Calibration Data
|
Status
Active: In Production.
Description
The DS24B33 is a 4096-bit, 1-Wire® EEPROM organized as 16 memory pages of 256 bits each. Data is written to a 32-byte scratchpad, verified, and then copied to the EEPROM memory. The DS24B33 communicates over a single-conductor 1-Wire bus. The communication follows the standard 1-Wire protocol. Each device has its own unalterable and unique 64-bit registration number that is factory programmed into the chip. The registration number is used to address the device in a multidrop 1-Wire net environment. The DS24B33 is software compatible to the DS2433.
|
|
Data Sheet
|
An evaluation kit is available: DS9120, DS9120P, DS9120Q
Key Features
- 4096 Bits of Nonvolatile EEPROM Partitioned Into Sixteen 256-Bit Pages
- Read and Write Access is Highly Backward-Compatible to the DS2433
- 256-Bit Scratchpad with Strict Read/Write Protocols Ensures Integrity of Data Transfer
- Unique, Factory-Programmed, 64-Bit Registration Number Ensures Error-Free Device Selection and Absolute Part Identity
- Switchpoint Hysteresis to Optimize Performance in the Presence of Noise
- Communicates to Host at 15.4kbps or 125kbps Using 1-Wire Protocol
- Low-Cost Through-Hole and SMD Packages
- Operating Range: +2.8V to +5.25V, -40°C to +85°C
- IEC 1000-4-2 Level 4 ESD Protection (±8kV Contact, ±15kV Air, Typical) for IO Pin
|
|
Applications/Uses
- Board Identification
- Medical Sensor Calibration Data Storage
- Smart Cables
- Storage of Calibration Constants
- Storage of Product Revision Status
|
|
|
|
Key Specifications:
| Memory (EPROM, EEPROM, ROM, NV SRAM) |
| Part Number |
Memory Type |
Memory Size |
Bus Type |
Real Time Clock |
DIP w/Int. Batt. |
Pwr. Cap Pckg. |
Battery Monitor |
GPIO |
VSUPPLY
(V) |
VSUPPLY
(V) |
Budgetary Price |
| min |
max |
See Notes |
| DS24B33 |
EEPROM |
4K x 1 |
1-Wire |
No |
No |
No |
No |
No |
2.8 |
5.25 |
$1.22 @1k |
|
See All Memory (EPROM, EEPROM, ROM, NV SRAM) (58)
|
Pricing Notes:
This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific prices and delivery, please see the price and availability page or contact an authorized distributor.
|
|
Application Notes
Product Guides
Reliability Reports
Software/Models
Ordering Information
|
Part Number
|
Free
Sample |
Buy |
Status
|
Package:
TYPE PINS FOOTPRINT
DRAWING CODE/VAR *
|
Temp |
RoHS/Lead-Free?
Materials Analysis
|
| DS24B33+
|
|
|
Active |
TO92;3 pin;19.5 mm²
Outline Drawing:21-0248 (PDF)
Land Pattern: Not Applicable
Use pkgcode/variation: Q3+1*
|
-40°C to +85°C
|
RoHS/Lead-Free: Lead Free
Materials Analysis |
| DS24B33+T&R
|
|
|
Active |
TO92;3 pin;27.6 mm²
Outline Drawing:21-0250 (PDF)
Land Pattern: Not Applicable
Use pkgcode/variation: Q3+4*
|
-40°C to +85°C
|
RoHS/Lead-Free: Lead Free
Materials Analysis |
| DS24B33G+T&R
|
|
|
Active |
SFN;2 pin;37.2 mm²
Outline Drawing:21-0390 (PDF)
Land Pattern: AN4132 (PDF)
Use pkgcode/variation: G266N+1*
|
-40°C to +85°C
|
RoHS/Lead-Free: Lead Free
Materials Analysis |
| DS24B33G+U
|
|
|
Active |
SFN;2 pin;37.2 mm²
Outline Drawing:21-0390 (PDF)
Land Pattern: AN4132 (PDF)
Use pkgcode/variation: G266N+1*
|
-40°C to +85°C
|
RoHS/Lead-Free: Lead Free
Materials Analysis |
| DS24B33S+
|
|
|
Active |
SOIC;8 pin;44.1 mm²
Outline Drawing:21-0262 (PDF)
Land Pattern: 90-0258 (PDF)
Use pkgcode/variation: W8+2*
|
-40°C to +85°C
|
RoHS/Lead-Free: Lead Free
Materials Analysis |
| DS24B33S+T&R
|
|
|
Active |
SOIC;8 pin;44.1 mm²
Outline Drawing:21-0262 (PDF)
Land Pattern: 90-0258 (PDF)
Use pkgcode/variation: W8+2*
|
-40°C to +85°C
|
RoHS/Lead-Free: Lead Free
Materials Analysis |
Notes:
- Other options and links for purchasing parts are listed at: http://www.maxim-ic.com/sales.
- Didn't Find What You Need? Ask our applications engineers. Expert assistance in finding parts, usually within one business day.
- Part number suffixes: T or T&R = tape and reel; + = RoHS/lead-free; # = RoHS/lead-exempt; -D = drypack; -U/+U on DS parts = cut tape. More: See Full Data Sheet or Maxim Product Naming Conventions.
- * Some packages have variations, listed on the drawing. "PkgCode/Variation" tells which variation the product uses. Note that "+", "#", "-" in the part number suffix describes RoHS status. Package drawings may show a different suffix character.
|
Notes and Comments
None.
Similar Products by Function
Evaluation Kits
Didn't Find What You Need?
Information Index
Document Ref.: 19-5759
Rev 2;
2012-03-29
This page last modified: 2012-03-29
|
Download
E-Mail