Maxim > Products > Optoelectronics > PHY1070

PHY1070

VCSEL Driver/Postamplifier with Digital Diagnostics

Programmable 4G VCSEL Transceiver

Overview

Technical Documents

Ordering Info

Status

Active: Data sheet on request only

Description

The PHY1070-01 is a combined VCSEL driver and limiting amplifier with support for digital diagnostic monitoring for use within small form factor modules for Fibre Channel applications. The transmitter integrates a high-speed output stage with programmable bias and modulation currents, controlled through a 2-wire serial interface. The mean power control loop allows connection in both common cathode and common anode configurations. A loss-of-signal (LOS) detector is included with detection based on either the receiver photo-detector average current or received-signal modulation amplitude. When used in digital diagnostics mode, the integrated A/D converters measuring temperature, Tx bias, supply voltage, Rx signal strength, and mean power are read through a 2-wire serial interface. An external microcontroller unit (MCU) is used for calibrating real-time diagnostic monitors and alarm generation.

Data Sheet

Request Full Data Sheet
Custom Order

Key Features

Multirate from 1Gbps to 4.25Gbps
VCSEL Driver Output Stage with 16mA max Modulation Drive and 20mA Bias Current
Programmable Mean Power Control Loop
Temperature-Compensated Modulation Current
Integrated Limiting Amplifier with Selectable Swing CML Output to Reduce Radiated Emissions
Programmable Receiver Lowpass Filter
Integrated LOS Function
Digital-Diagnostic Mode Compliant with SFF-8472 Using an External MCU
Stand-Alone Mode Where Device Parameters are Loaded from an External EEPROM
-40°C to +85°C Operating Temperature Range
6mm x 6mm, 36-Pin QFN Package
Eye Safety Logic Certified by TUV

Applications/Uses

Fibre Channel 1x, 2x, 4x
SFF and SFP Modules

Key Specifications:

Optical Transceivers

Part Number

Applications

Target Oper. Range
(Gbps)

Data Rate
(Mbps)

V_SUPPLY
(V)

I_CC
(mA)

I/O Type

I_MOD
(mA)

I_BIAS
(mA)

EV Kit

Package/Pins

Oper. Temp.
(°C)

min

max

typ

max

PHY1070

Fibre Channel

SFF and SFP Modules

1 to 4.25

106

4250

3.3

102

CML

Yes

QFN/36

Thin QFN/36

-40 to +85

See All Optical Transceivers (7)

Pricing Notes:
This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific prices and delivery, please see the price and availability page or contact an authorized distributor.

Application Notes

Application Note 4907		Setting Up and Programming the PHY107x in Non-DDM Applications
Application Note 4908		Programming the Phyworks' PHY1070-Family Reference Designs
Application Note 4909		PHY1070/PHY1075 Reference Firmware
Application Note 4910		Preventing Clock Stretching in Phyworks' Reference Designs
Application Note 4912		Using a Pre-Calibrated Temperature Sensor in PHY1070-Family SFP
Application Note 4914		EEPROM and FLASH Write Cycle Timing
Application Note 4915		Setting Up the IAR Embedded Workbench for Phyworks' Firmware
Application Note 4917		PHY107x Evaluation GUI 1.6 Users Guide
Application Note 4918		PHY107X Evaluation GUI Version 2.5 Users Guide

Product Guides

Communications (PDF)

Reliability Reports

Request Reliability Report for:

Software/Models

none

Ordering Information

Filters:

Part Number:

Package:

Temperature:

Tape and Reel

Sample

Part Number	Free Sample	Buy	Status	Package: TYPE PINS FOOTPRINT DRAWING CODE/VAR *	Temp	RoHS/Lead-Free? Materials Analysis
PHY1070-01EVAL-E			Active: Data sheet on request only	KIT; Land Pattern: Not Available	Special - See Data Sheet	See data sheet
PHY1070-01EVAL-O			Active: Data sheet on request only	KIT; Land Pattern: Not Available	Special - See Data Sheet	See data sheet
PHY1070-01MOD-O			Active: Data sheet on request only	KIT; Land Pattern: Not Available	Special - See Data Sheet	See data sheet
PHY1070-01QH-BR			Active: Data sheet on request only	QFN;QFN; Outline Drawing:21-0633 (PDF) Land Pattern: 90-0382 (PDF) Use pkgcode/variation: G3666N+1*	-40°C to +85°C	RoHS/Lead-Free: Lead Free Materials Analysis
PHY1070-01QH-RR			Active: Data sheet on request only	QFN;QFN; Outline Drawing:21-0633 (PDF) Land Pattern: 90-0382 (PDF) Use pkgcode/variation: G3666N+1*	-40°C to +85°C	RoHS/Lead-Free: Lead Free Materials Analysis
PHY1070-01QS-BR			Active: Data sheet on request only	QFN;QFN; Outline Drawing:21-0633 (PDF) Land Pattern: 90-0382 (PDF) Use pkgcode/variation: G3666N+1*	-40°C to +85°C	RoHS/Lead-Free: Lead Free Materials Analysis
PHY1070-01QS-RR			Active: Data sheet on request only	QFN;QFN; Outline Drawing:21-0633 (PDF) Land Pattern: 90-0382 (PDF) Use pkgcode/variation: G3666N+1*	-40°C to +85°C	RoHS/Lead-Free: Lead Free Materials Analysis

Notes:

Other options and links for purchasing parts are listed at: http://www.maxim-ic.com/sales.
Didn't Find What You Need? Ask our applications engineers. Expert assistance in finding parts, usually within one business day.
Part number suffixes: T or T&R = tape and reel; + = RoHS/lead-free; # = RoHS/lead-exempt; -D = drypack; -U/+U on DS parts = cut tape. More: See Full Data Sheet or Maxim Product Naming Conventions.
* Some packages have variations, listed on the drawing. "PkgCode/Variation" tells which variation the product uses. Note that "+", "#", "-" in the part number suffix describes RoHS status. Package drawings may show a different suffix character.

Similar Products by Function

See All Optical Transceivers (7 Products)

Didn't Find What You Need?

Next Day Product Selection Assistance from Applications Engineers
Parametric Search
Applications Help

Information Index

Overview		Technical Documents		Ordering Info		Related Products
Description Key Features Applications/Uses Key Specifications Diagram Notes and Comments		Data Sheet Application Notes Evaluation Kits Product Guides Reliability Reports Software/Models		Price and Availability Samples Buy Online Package Information Lead-Free Information		Similar Products by Function Similar Products by Application Evaluation Kits Products with Similar Part Numbers Products Used With This

Document Ref.: 19-5681 Rev 2; 2012-02-13
This page last modified: 2012-02-13