MAX1358B

16-Bit, Data-Acquisition System with ADC, DACs, UPIOs, RTC, Voltage Monitors, and Temp Sensor

 Overview   Technical Documents   Ordering Info   Related Products   User Comments (0)   All   


Status Explanations for product status codes

Active: In Production.

Description

The MAX1358B smart data-acquisition system (DAS) is based on a 16-bit, sigma-delta analog-to-digital converter (ADC) and system-support functionality for a microprocessor (µP)-based system. This device integrates an ADC, DACs, operational amplifiers, internal selectable-voltage reference, temperature sensors, analog switches, a 32kHz oscillator, a real-time clock (RTC) with alarm, a high-frequency-locked loop (FLL) clock, four user-programmable I/Os, an interrupt generator, and 1.8V and 2.7V voltage monitors in a single chip.

The MAX1358B has dual 10:1 differential input multiplexers (muxes) that accept signal levels from 0 to AVDD. An on-chip 1x to 8x programmable-gain amplifier (PGA) allows measuring low-level signals and reduces external circuitry required.

The MAX1358B operates from a single +1.8V to +3.6V supply and consumes only 1.15mA in normal mode and only 3µA in sleep mode. The MAX1358B has two DACs with one uncommitted op amp.

The serial interface is compatible with either SPI™/QSPI™ or MICROWIRE™, and is used to power up, configure, and check the status of all functional blocks.

The MAX1358B is available in a space-saving, 40-pin TQFN package and is specified over the commercial (0°C to +70°C) and the extended (-40°C to +85°C) temperature ranges.
 

Data Sheet

Download this datasheet in PDF formatDownload Rev 1 (PDF, 3.5MB)
Send this datasheet to any email addressE-Mail

My Maxim: Not Logged In
By logging in to My Maxim you can subscribe to alerts for this data sheet.

Login | Register
An evaluation kit is available: MAX1358EVKIT

Key Features

  • +1.8V to +3.6V Single-Supply Operation
  • Multichannel, 16-Bit, Sigma-Delta ADC
    • 10sps to 477sps Programmable Conversion Rate
    • Self- and System Offset and Gain Calibration
    • PGA with Gains of 1, 2, 4, or 8
    • Unipolar and Bipolar Modes
    • 10-Input Differential Multiplexer
  • 10-Bit Force-Sense DACs
  • Uncommitted Op Amps
  • Dual SPDT and SPST Analog Switches
  • Selectable References
    • 1.25V, 2.048V, and 2.5V
  • Internal Charge Pump
  • System Support
    • RTC and Alarm Register
    • Internal/External Temperature Sensor
    • Internal Oscillator with Clock Output
    • User-Programmable I/O and Interrupt Generator
    • VDD Monitors
  • SPI/QSPI/MICROWIRE, 4-Wire Serial Interface
  • Space-Saving (6mm x 6mm x 0.8mm), 40-Pin TQFN Package
 

Applications/Uses

  • Battery-Powered and Portable Devices
  • Data-Acquisition Systems
  • Electrochemical and Optical Sensors
  • Industrial Control
  • Medical Instruments
   

Key Specifications:

Precision ADCs (< 5Msps)
Part Number Resolution
(bits)
Input Chan. Conv. Rate
(ksps)
Data Bus
(bits)
Diff/S.E. Input Internal VREF
(V)
External VREF
(V)
External VREF
(V)
Unipolar VIN
(V)
Bipolar VIN
(±V)
INL
(±LSB)
Package/Pins Budgetary Price
ADC max nominal min max max max See Notes
MAX1358B  16 2 0.512 SPI Diff. Only 2.5 1 3.6 2.5 2.5 2
TQFN/40
$8.88 @1k
See All Precision ADCs (< 5Msps) (423)
Pricing Notes:
This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific prices and delivery, please see the price and availability page or contact an authorized distributor.

Sensor Signal Conditioners
Part Number Sensing Element PGA Gain Calibration Method Output Type ICC
(mA)
Interface DACs/ADCs VSUPPLY
(V)
Budgetary Price
typ See Notes
MAX1358B  Amperometric Cell (Blood Glucose) 1 to 8 (4 gains) External microcontroller Digital 1.15 SPI
2 10-bit DACs
16-bit ADC
1.8 to 3.6 $8.88 @1k
See All Sensor Signal Conditioners (10)
Pricing Notes:
This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific prices and delivery, please see the price and availability page or contact an authorized distributor.


Diagram

MAX1358B: Functional Diagram
Functional Diagram

Reliability Reports

Show FIT data for:
Request Reliability Report for:

Software/Models

none

Ordering Information

Filters: Part Number: Package: Temperature: Tape and Reel Sample
Part Number Free
Sample
Buy Status Explanations for product status codes Package:
TYPE PINS FOOTPRINT
DRAWING  CODE/VAR *
Temp RoHS/Lead-Free?
Materials Analysis
MAX1358BETL    
Active TQFN;40 pin;37.2 mm²
Outline Drawing:21-0141 (PDF)
Land Pattern: 90-0055 (PDF)
Use pkgcode/variation: T4066-5*
-40°C to +85°C RoHS/Lead-Free: No
Materials Analysis
MAX1358BETL+  
Active TQFN;40 pin;37.2 mm²
Outline Drawing:21-0141 (PDF)
Land Pattern: 90-0055 (PDF)
Use pkgcode/variation: T4066+5*
-40°C to +85°C RoHS/Lead-Free: Lead Free
Materials Analysis
MAX1358BETL+T    
Active TQFN;40 pin;37.2 mm²
Outline Drawing:21-0141 (PDF)
Land Pattern: 90-0055 (PDF)
Use pkgcode/variation: T4066+5*
-40°C to +85°C RoHS/Lead-Free: Lead Free
Materials Analysis
MAX1358BETL+TW    
Active TQFN;40 pin;37.2 mm²
Outline Drawing:21-0141 (PDF)
Land Pattern: 90-0055 (PDF)
Use pkgcode/variation: T4066+5*
-40°C to +85°C RoHS/Lead-Free: Lead Free
Materials Analysis
MAX1358BETL+W    
Active TQFN;40 pin;37.2 mm²
Outline Drawing:21-0141 (PDF)
Land Pattern: 90-0055 (PDF)
Use pkgcode/variation: T4066+5*
-40°C to +85°C RoHS/Lead-Free: Lead Free
Materials Analysis
MAX1358BETL-T    
Active QFN;40 pin

Land Pattern: Not Available

-40°C to +85°C See data sheet

Notes:
  1. Other options and links for purchasing parts are listed at: http://www.maxim-ic.com/sales.
  2. Didn't Find What You Need? Ask our applications engineers. Expert assistance in finding parts, usually within one business day.
  3. Part number suffixes: T or T&R = tape and reel; + = RoHS/lead-free; # = RoHS/lead-exempt; -D = drypack; -U/+U on DS parts = cut tape. More: See Full Data Sheet or Maxim Product Naming Conventions.
  4. * Some packages have variations, listed on the drawing. "PkgCode/Variation" tells which variation the product uses. Note that "+", "#", "-" in the part number suffix describes RoHS status. Package drawings may show a different suffix character.

Similar Products by Function

See All Precision ADCs (< 5Msps) (430 Products)
See All Sensor Signal Conditioners (11 Products)

Similar Products by Application

Blood Glucose Meters > Integrated Analog Front-End (AFE)

Evaluation Kits

MAX1358EVKIT Evaluation Kit for the MAX1358


Didn't Find What You Need?

Information Index

Document Ref.: 19-5159 Rev 1; 2011-03-09
This page last modified: 2011-03-09


 


Contact Us     |     Privacy Policy     |     Legal Notices     |     Distributor Portal
Copyright © 2012 by Maxim Integrated Products