71M6515H

Energy Meter IC

Industry's Most Integrated Metering SoC Product Line and Best-in-Class Accuracy Performance

 Overview   Technical Documents   Ordering Info   Related Products   User Comments (0)   All   


Status Explanations for product status codes

Active: In Production.

Description

The 71M6515H is a high-accuracy analog front-end (AFE) IC that provides measurements for four-quadrant 3-phase metering. The combination of a 21-bit sigma-delta analog-to-digital converter with a six-input AFE, a thermally compensated high-precision reference, and a compute engine results in high accuracy and wide dynamic range. Our Single Converter Technology® reduces crosstalk and cost. This IC also provides a real-time clock (RTC) and battery backup for time-of-use (TOU) metering.

The host processor communicates with the 71M6515H through a UART interface using the programmable IRQZ interrupt. The 71M6515H calculates and accumulates meter measurements for each accumulation interval. A high-speed synchronous serial port (SSI) is provided to facilitate high-end metering. Integrated rectifying functions on the battery-backup circuit enable minimal external component usage and minimum backup current. Also, eight multipurpose pins are provided for control of peripherals.
 

Data Sheet

Download this datasheet in PDF formatDownload Rev 2 (PDF, 832kB)
Send this datasheet to any email addressE-Mail

My Maxim: Not Logged In
By logging in to My Maxim you can subscribe to alerts for this data sheet.

Login | Register
An evaluation kit is available: 71M6515H-DB 80515-FPBM-TFP2

NOTE: This product uses the following:
71M6515H EVKIT GUI (PMTest)

Key Features

  • < 0.1% Wh Accuracy Over Temperature and 2000:1 Range
  • Protects Accumulated Data and Powers RTC During Power-Supply Outage
  • UART Control Interface, Two Selectable Data Rates
  • Low System Cost
 

Applications/Uses

  • Industrial and Commercial Meters, 0.1% Accuracy
   

Application Notes

User Guide 4740   71M6511/71M6511H/71M6513/71M6513H Power Meter IC Family Software User's Guide
User Guide 4741   71M65xx ADM51 ICE Safety Notice
User Guide 4760   71M6515H Demo Board Quick Start Guide
Brochure 4764   TFP2 Flash Programmer Quick Start Guide
Application Note 4890   71M65XX Precautions for Setting ECK_DIS and SECURE Bits
Application Note 4892   Temperature Compensation for the 71M651x/651xH, 71M652x, and 71M653x Energy Meter ICs
Application Note 4899   Liquid Crystal Display (LCD) Interface
Application Note 4900   Interfacing to the RX Pin of the Teridian 6511, 6513 and 6515
Application Note 4901   Controlling the CHOP_EN Signal
Application Note 4902   71M651X Development Tools
Application Note 4903   Using the SSI Interface with the 71M651X Energy Meter Chips
Application Note 4947   The Real-Time Clocks of the 71M65XX Metering ICs
Application Note 4948   71M651X Operation with Batteries
Application Note 4950   71M651X Boot Loader
Application Note 4955   Programming Teridian Meter ICs
Application Note 4956   Meter Design for Power Failure Events
Application Note 4957   Teridian 71M65XX Using DC-Tolerant CTs by J&D Electronics
Application Note 4969   EMC/EMI Design Guidelines for 71M65xx ICs
Application Note 4970   Connecting the VFLT Pin of the 71M6515H
Application Note 5077   A Low-Current Power Supply for the 71M65XX Metering ICs
Brochure 5090   Fourth-Generation SoCs Accelerate Meter Certification

Reliability Reports

Reliability Report: 71M6515H.pdf

Software/Models

71M6515H EVKIT GUI (PMTest)

Ordering Information

Filters: Part Number: Package: Temperature: Tape and Reel Sample
Part Number Free
Sample
Buy Status Explanations for product status codes Package:
TYPE PINS FOOTPRINT
DRAWING  CODE/VAR *
Temp RoHS/Lead-Free?
Materials Analysis
71M6515H-IGT/F  
Active LQFP;64 pin;146.4 mm²

Land Pattern: Not Applicable
Use pkgcode/variation: C64L+6*
-40°C to +85°C RoHS/Lead-Free: Lead Free
Materials Analysis
71M6515H-IGTR/F    
Active LQFP;64 pin;146.4 mm²

Land Pattern: Not Applicable
Use pkgcode/variation: C64L+6*
-40°C to +85°C RoHS/Lead-Free: Lead Free
Materials Analysis
71M6515H-IGTW/F  
Active LQFP;64 pin;146.4 mm²

Land Pattern: Not Applicable
Use pkgcode/variation: C64L+6*
-40°C to +85°C RoHS/Lead-Free: Lead Free
Materials Analysis

Notes:
  1. Other options and links for purchasing parts are listed at: http://www.maxim-ic.com/sales.
  2. Didn't Find What You Need? Ask our applications engineers. Expert assistance in finding parts, usually within one business day.
  3. Part number suffixes: T or T&R = tape and reel; + = RoHS/lead-free; # = RoHS/lead-exempt; -D = drypack; -U/+U on DS parts = cut tape. More: See Full Data Sheet or Maxim Product Naming Conventions.
  4. * Some packages have variations, listed on the drawing. "PkgCode/Variation" tells which variation the product uses. Note that "+", "#", "-" in the part number suffix describes RoHS status. Package drawings may show a different suffix character.

Evaluation Kits

71M6515H-DB Demo Board for the 71M6515H
80515-FPBM-TFP2 TFP2 Flash Programmer Demo Board

Products with Similar Part Numbers

71M6515H-DB Demo Board for the 71M6515H


Didn't Find What You Need?

Information Index

Document Ref.: 19-5361 Rev 2; 2011-07-27
This page last modified: 2011-07-27


 


Contact Us     |     Privacy Policy     |     Legal Notices     |     Distributor Portal
Copyright © 2012 by Maxim Integrated Products