Maxim > Products > Energy-Measurement and Metering SoCs > 71M6521DE, 71M6521DH, ...

71M6521DE, 71M6521DH, 71M6521FE

Energy Meter ICs

Industry’s Most Integrated Metering SoC Product Line and Best-in-Class Accuracy Performance

 Overview   Technical Documents   Ordering Info   Related Products   User Comments (0)   All   


Status Explanations for product status codes

Part Number Status
71M6521DE This product is Not Recommended for New Designs. Some versions may be No Longer Available or being discontinued and subject to Last Time Buy, after which new orders can not be placed. See Ordering Information for details.
71M6521DH Future Product
71M6521FE This product is Not Recommended for New Designs. Some versions may be No Longer Available or being discontinued and subject to Last Time Buy, after which new orders can not be placed. See Ordering Information for details.

Description

The Teridian™ 71M6521DE/DH/FE energy meter ICs are highly integrated systems-on-a-chip (SoCs) with an MPU core, RTC, flash, and LCD driver. The Single Converter Technology® with a 22-bit delta-sigma ADC, four analog inputs, digital temperature compensation, precision voltage reference, battery voltage monitor, and 32-bit computation engine (CE) supports a wide range of residential metering applications with very few low-cost external components. A 32kHz crystal time base for the entire system and internal battery-backup support for RAM and RTC further reduce system cost. The ICs support 2-wire, 3-wire, and 4-wire single-phase and dual-phase residential metering along with tamper-detection mechanisms.
Maximum design flexibility is provided by multiple UARTs, I²C, MICROWIRE®, up to 18 DIO pins, and in-system programmable flash memory, which can be updated with data or application code in operation.
A complete array of ICE and development tools, programming libraries, and reference designs enable rapid development and certification of TOU, AMR, and prepay meters that comply with worldwide electricity metering standards.
 

Data Sheet

Download this datasheet in PDF formatDownload Rev 2 (PDF, 2MB)
Send this datasheet to any email addressE-Mail

My Maxim: Not Logged In
By logging in to My Maxim you can subscribe to alerts for this data sheet.

Login | Register
An evaluation kit is available: 71M6521FE-DB 80515-FPBM-TFP2

NOTE: This product uses the following:
71M6521 EVKIT Code

Key Features

  • Up to 0.1% Wh Accuracy Over 2000:1 Current Range
  • Exceeds IEC 62053/ANSI C 12.20 Standards
  • Voltage Reference < 40 ppm/°C (< 20ppm/°C for 71M6521DH)
  • Four Sensor Inputs—VDD Referenced
  • Low-Jitter Wh and VARh Pulse Test Outputs (10kHz max)
  • Pulse Count for Pulse Outputs
  • Four-Quadrant Metering
  • Tamper Detection
    • Neutral Current with CT or Shunt
  • Line Frequency Count for RTC
  • Digital Temperature Compensation
  • Sag Detection for Phase A and B
  • Independent 32-Bit Compute Engine
  • 46-64Hz Line Frequency Range with Same Calibration
  • Phase Compensation (±7°)
  • Battery backup for RTC and battery monitor
  • Three Battery Modes with Wake-Up on Pushbutton or Timer:
    • Brownout Mode (48µA)
    • LCD Mode (5.7µA)
    • Sleep Mode (2.9µA)
  • Energy Display on Main Power Failure
  • Wake-Up with Pushbutton
  • 22-Bit Delta-Sigma ADC
  • 8-Bit MPU (80515), 1 Clock Cycle per Instruction with Integrated ICE for MPU Debug
  • RTC with Temperature Compensation
  • Auto-Calibration
  • Hardware Watchdog Timer, Power-Fail Monitor
  • LCD Driver (Up to 152 Pixels)
  • Up to 18 General-Purpose I/O Pins
  • 32kHz Time Base
  • 16KB (6521DE/DH) or 32KB (6521FE) Flash with Security
  • 2KB MPU XRAM
  • Two UARTs for IR and AMR
  • Digital I/O Pins Compatible with 5V Inputs
  • 64-Pin LQFP or 68-Pin QFN Package
  • Lead(Pb)-Free Packages
 

Applications/Uses

  • Residential Meters, 0.5% Accuracy
   

Notes and Comments

  • TFP2 Flash Programmer:
    • For in-system programming
    • Can be used with simple socket module board to preprogram individual ICs (refer to the programming application note for examples of socket board schematics)
  • ADM51 ICE (In-Circuit Emulator):
    • Signum Systems ADM51 is compatible with the Keil symbolic output format
    • Performs code emulation with breakpoints, watch windows, etc., with support of source code symbols
    • Can be used to program small engineering and prototype build requirements
  • Third-Party Programmer Supplier:
      BPM Microsystems supports flash programmer and socket modules for Teridian’s various metering devices
  • Firmware Development Tools:
    • Available from Keil

Didn't Find What You Need?

Information Index

Document Ref.: 19-5370 Rev 2; 2011-11-10
This page last modified: 2011-11-10




Contact Us     |     Privacy Policy     |     Legal Notices     |     Distributor Portal
Copyright © 2012 by Maxim Integrated Products