78M6612

Single-Phase, Dual-Outlet Power and Energy Measurement IC

Industry's First and Only Embedded AC Metering Solution for the Home and Enterprise

 Overview   Technical Documents   Ordering Info   Related Products   User Comments (0)   All   


Status Explanations for product status codes

Part Number Status
78M6612 Active: In Production. See Ordering Information for details.

Description

The Teridian™ 78M6612 is a highly integrated, single-phase, power and energy measurement and monitoring system-on-chip (SoC) that includes a 32-bit compute engine (CE), an MPU core, RTC, and flash. Our Single Converter Technology® with a 22-bit delta-sigma ADC, four analog inputs, digital temperature compensation, and precision voltage reference supports a wide range of single-phase, dual-outlet power measurement applications with very few external components.
With measurement technology leveraged from Maxim’s flagship utility metering ICs, the device offers features including 32KB of flash program memory, 2KB shared RAM, three low-power modes with internal timer or external event wake-up, two UARTs, I²C/MICROWIRE® EEPROM I/F, and an in-system programmable flash.
A complete array of ICE and development tools, programming libraries and reference designs enable rapid development and certification of power and energy measurement solutions that meet the most demanding worldwide electricity metering standards.
 

Data Sheet

Download this datasheet in PDF formatDownload Rev 2 (PDF, 1.1MB)
Send this datasheet to any email addressE-Mail

My Maxim: Not Logged In
By logging in to My Maxim you can subscribe to alerts for this data sheet.

Login | Register
An evaluation kit is available: 78M6612-EVM-1 78M6612-DB-OMU-RF 78M6612-DB-OMU-USB 80515-FPBM-TFP2 78M6612SP-EVM-1

Key Features

  • Measures Each Outlet of a Duplex Receptacle with a Single IC
  • Provides Complete Energy Measurement and Communication Protocol Capability in a Single IC
  • Intelligent Switch Control Capability
  • < 0.5% Wh Accuracy Over 2000:1 Current Range and Over Temperature
  • Exceeds IEC 62053/ANSIC12.20 Standards
  • Voltage Reference < 40ppm/°C
  • Four Sensor Inputs — VDD Referenced
  • Low Jitter Wh and VARh Pulse Test Outputs (10kHz max)
  • Pulse Count for Pulse Outputs
  • Line Frequency Count for RTC
  • Digital Temperature Compensation
  • Sag Detection for Phase A and B
  • Independent 32-Bit Compute Engine
  • 46Hz–64Hz Line Frequency Range with Same Calibration
  • Phase Compensation (±7°)
  • Battery Backup for RTC and Battery Monitor
  • Three Battery Modes with Wake-Up Timer:
    • Brownout Mode (48µA)
    • LCD Mode (5.7µA)
    • Sleep Mode (2.9µA)
  • Energy Display on Main Power Failure
  • Wake-Up Timer
  • 22-Bit Delta-Sigma ADC
  • 8-Bit MPU (80515), 1 Clock Cycle per Instruction with Integrated ICE for MPU Debug
  • RTC with Temperature Compensation
  • Auto-Calibration
  • Hardware watchdog Timer, Power-Fail Monitor
  • LCD Driver (Up to 152 Pixels)
  • Up to 18 General-Purpose I/O Pins
  • 32kHz Time Base
  • 32KB Flash with Security
  • 2KB MPU XRAM
  • Two UARTs
  • Digital I/O Pins Compatible with 5V Inputs
  • 64-Pin LQFP or 68-Pin QFN Package
  • RoHS-Compliant (6/6) Lead(Pb)-Free Packages
  • Complete Application Firmware Available
 

Applications/Uses

  • Communication Power Supplies
  • Computer Power Supplies
  • Consumer White Goods
  • Home and Commercial Automation
   

Key Specifications:

Energy Measurement SoCs
Part Number SoC Type MCU Core MCU MIPS VSUPPLY
(V)
Total Sensor Inputs Internal Flash
(KBytes)
Internal RAM
(KBytes)
DIOs Slave Host Interface(s) Package/Pins Smallest Available Pckg.
(mm2)
Budgetary Price
max max w/pins See Notes
78M6612  Energy Measurement 80515 5 3.3 4 32 2 18 UART
LQFP/64
SQFN/68
64.8 $2.85 @1k
See All Energy Measurement SoCs (4)
Pricing Notes:
This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific prices and delivery, please see the price and availability page or contact an authorized distributor.


Notes and Comments

  • TFP2 Flash Programmer:
    • For in-system programming
    • Can be used with simple socket module board to preprogram individual ICs (refer to the programming application note for examples of socket board schematics)
  • ADM51 ICE (In-Circuit Emulator):
    • Signum Systems ADM51 is compatible with the Keil symbolic output format
    • Performs code emulation with breakpoints, watch windows, etc., with support of source code symbols
    • Can be used to program small engineering and prototype build requirements
  • Firmware Development Tools:
    • Available from Keil

Didn't Find What You Need?

Information Index

Document Ref.: 19-5348 Rev 2; 2012-01-04
This page last modified: 2012-01-11




Contact Us     |     Privacy Policy     |     Legal Notices     |     Distributor Portal
Copyright © 2012 by Maxim Integrated Products