MAX11835

Efficient, High-Voltage, TacTouch™ Haptic Actuator Controller with I²C Interface

Industry's First Single-Chip Haptic Pattern Generator, Boost Converter, and Driver IC for High-Voltage Actuators

 Overview   Technical Documents   Ordering Info   Related Products   User Comments (0)   All   


Status Explanations for product status codes

Active: In Production.

Description

The MAX11835 haptic (tactile) actuator controller provides a complete solution to drive haptic actuators to add haptic feedback to products featuring user-touch interfaces. The MAX11835 drives actuators including single-layer, multilayer piezo, or electroactive polymer actuators. The device efficiently generates any type of user-programmable waveform including sine waves, trapezoidals, squares, and pulses to drive the piezo loads to create custom haptic sensations. The low-power device directly interfaces with an application processor or host controller through an I²C interface and integrates various blocks including a boost regulator, pattern storage memory, and waveform generator block in one package, thus providing a complete haptic feedback controller solution.

The MAX11835 contains a boost regulator that uses an external flyback to efficiently generate high-voltage waveforms up to 250V to drive haptic actuators while limiting current drain. The boost regulator features an internal n-channel MOSFET with current limit to control the drain from the battery or power supply.

The MAX11835 features user-programmable haptic feedback pattern storage memory that drives the waveform generator with piecewise linear data using 8-bit resolution. The device also offers a single trigger interface to allow the implementation of fast haptics directly from the touch controller. This allows use of multiple controllers in parallel to provide haptic sensations for larger displays. The device provides smart low-power and standby modes to reduce power consumption before, during, and after waveform generation. The MAX11835 enters low-power mode after a haptic event to automatically save power.

The MAX11835 offers a fast 400kHz I²C serial interface to allow programming of various modes of operation, status checking, and haptic waveforms. The operating supply range is 1.7V to 3.6V for the digital supply (DVDD) and 2.7V to 5.25V for the boost supply (BVDD) and analog supply (AVDD).


Maxim's haptic actuator controller featuring the MAX11835 evaluation kit.


The benefits the MAX11851 touch-screen controller and the MAX11835 tactile-feedback controller.
 

Data Sheet

ABRIDGED DATA SHEET
Download this datasheet in PDF formatDownload Rev 0 (PDF, 60kB)
Request Full Data Sheet
An evaluation kit is available: MAX11835TEVS

Key Features

  • Supports Multiple High- or Low-Voltage Haptic Actuators
    • Single-Layer Piezo Actuators
    • Multilayer Piezo Actuators
    • Electroactive Polymers
  • Create Custom User-Programmable Waveforms with Up to 8-Bit Resolution
  • On-Chip, Multiple Haptic Waveform Storage Up to 192 Bytes
  • Analog Input Through AIN
    • Provides Boost Tracking Up to 300Hz Signal
    • Provides Up/Down Scaling for Small/Large Amplitude Signals
  • Active-Low TRIG to Optionally Start a Preprogrammed Haptic Waveform—Up to 16 Stored Waveforms
  • On-Chip DC Boost Regulator
    • On-Chip 30V High-Voltage Boost Switch with Programmable Maximum Peak Current
    • Flyback Converter Generates High-Voltage Supply
    • Efficient Design to Minimize Drain on Battery Applications
  • DIS Input to Disable or Enter Lower Power Boost Operation During High-Current Events
  • Digital Supply 1.7V to 3.6V
  • Boost/Flyback (BVDD) and Analog Power Supply (AVDD) 2.7V to 5.25V
  • Programmable Low-Power Modes
    • 1µA Deep-Sleep Shutdown Current
  • Thermal Shutdown
  • Available in 400kHz I²C
  • ESD Protection: ±2kV HBM, ±1kV CDM, ±200V MM
 

Applications/Uses

  • Handheld Gaming Consoles
  • Infotainment for Automotive Applications
  • Keypads and Keyboards
  • Mobile Communication Devices
  • Notebooks, Netbooks, and e-Readers
  • PDA, GPS, and Media Players
   

Key Specifications:

Touch Interface Products
Part Number Interface Haptic Functions Haptic Actuator Type Touch Pressure Measurement Digital I/O Supply Voltage
(V)
Digital Supply Voltage
(V)
Analog Supply Voltage
(V)
Analog Supply Voltage
(V)
EV Kit Integrated Proximity Sensing Oper. Temp.
(°C)
Package/Pins Budgetary Price
min max min max See Notes
MAX11835  I2C Actuator Driver
EPAM
Multi-Layer Piezo
Single Layer Piezo
No 1.7 3.6 2.7 5.25 Yes No -40 to +85
WLP/25
$1.42 @1k
See All Touch Interface Products (14)
Pricing Notes:
This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific prices and delivery, please see the price and availability page or contact an authorized distributor.


More Information

New Product Press Release 2010-01-28 ]

Didn't Find What You Need?

Information Index

Document Ref.: 19-5291 Rev 0; 2010-10-18
This page last modified: 2010-12-16




Contact Us     |     Privacy Policy     |     Legal Notices
Copyright © 2012 by Maxim Integrated Products