|
|
|
MAX5969C, MAX5969E
IEEE 802.3af/at-Compliant, Powered Device Interface Controllers with Integrated Power MOSFET
100V, IEEE 802.3af/at PD Interface Controllers with Sleep Mode Save Power
|
Status
Active: Data sheet on request only
Description
The MAX5969C/MAX5969E provide a complete interface for a powered device (PD) to comply with the IEEE® 802.3af/at standard in a power-over-Ethernet (PoE) system. The MAX5969C/MAX5969E provide the PD with a detection signature, classification signature, and an integrated isolation power switch with inrush current control. During the inrush period, the MAX5969C/MAX5969E limit the current to less than 180mA before switching to the higher current limit (720mA to 880mA) when the isolation power MOSFET is fully enhanced. The devices feature an input UVLO with wide hysteresis and long deglitch time to compensate for twisted-pair cable resistive drop and to assure glitch-free transition during power-on/-off conditions. The MAX5969C/MAX5969E can withstand up to 100V at the input.
The MAX5969C/MAX5969E support a 2-Event classification method as specified in the IEEE 802.3at standard and provide a signal to indicate when probed by a Type 2 power sourcing equipment (PSE). The devices detect the presence of a wall adapter power source connection and allow a smooth switch over from the PoE power source to the wall power adaptor.
The MAX5969C/MAX5969E also provide a power-good (PG) signal, two-step current limit and foldback, over-temperature protection, and di/dt limit. A sleep mode feature in the MAX5969C/MAX5969E provides low power consumption while supporting Maintain Power Signature (MPS). A green sleep mode feature in the MAX5969C/MAX5969E further reduces power consumption to comply with green power requirements while still supporting MPS. The MAX5969C/MAX5969E also feature an LED driver that is automatically activated during sleep mode or manually activated during normal operation. During sleep mode, the LED driver sources a periodic current (ILED) at 250Hz (MAX5969C) or 15.625kHz (MAX5969E).
The MAX5969C/MAX5969E are available in a 16-pin, 5mm x 5mm TQFN power package. These devices are rated over the -40°C to +85°C extended temperature range.
|
|
Data Sheet
|
Key Features
- Sleep Mode and Green Power
- IEEE 802.3af/at Compliant
- 2-Event Classification or an External Wall Adapter Indicator Output
- Simplified Wall Adapter Interface
- PoE Classification 0–5
- 100V Input Absolute Maximum Rating
- Inrush Current Limit of 180mA Maximum
- Current Limit During Normal Operation Between 720mA and 880mA
- Current Limit and Foldback
- Legacy UVLO at 36V
- LED Driver with Programmable LED Current
- Overtemperature Protection
- Thermally Enhanced, 5mm x 5mm, 16-Pin TQFN
|
|
Applications/Uses
- Cameras
- IEEE 802.3af/at Powered Devices
- IP Phones, Wireless Access Nodes, IP Security
- WiMAX™ Base Stations
|
|
|
|
Product Guides
Reliability Reports
| Reliability Report: |
MAX5969C.pdf |
| Show FIT data for: |
|
| Request Reliability Report for: |
|
Software/Models
Ordering Information
|
Part Number
|
Free
Sample |
Buy |
Status
|
Package:
TYPE PINS FOOTPRINT
DRAWING CODE/VAR *
|
Temp |
RoHS/Lead-Free?
Materials Analysis
|
| MAX5969CETE+
|
|
|
Active: Data sheet on request only |
TQFN;16 pin;26 mm²
Outline Drawing:21-0140 (PDF)
Land Pattern: 90-0121 (PDF)
Use pkgcode/variation: T1655+4*
|
-40°C to +85°C
|
RoHS/Lead-Free: Lead Free
Materials Analysis |
| MAX5969CETE+T
|
|
|
Active: Data sheet on request only |
TQFN;16 pin;26 mm²
Outline Drawing:21-0140 (PDF)
Land Pattern: 90-0121 (PDF)
Use pkgcode/variation: T1655+4*
|
-40°C to +85°C
|
RoHS/Lead-Free: Lead Free
Materials Analysis |
| MAX5969CEVKIT
|
|
|
Active: Data sheet on request only |
KIT;
Land Pattern: Not Available
|
|
See data sheet
|
| MAX5969EETE+
|
|
|
Active: Data sheet on request only |
TQFN;16 pin;26 mm²
Outline Drawing:21-0140 (PDF)
Land Pattern: 90-0121 (PDF)
Use pkgcode/variation: T1655+4*
|
-40°C to +85°C
|
RoHS/Lead-Free: Lead Free
Materials Analysis |
| MAX5969EETE+T
|
|
|
Active: Data sheet on request only |
QFN;
Land Pattern: Not Available
|
-40°C to +85°C
|
See data sheet
|
Notes:
- Other options and links for purchasing parts are listed at: http://www.maxim-ic.com/sales.
- Didn't Find What You Need? Ask our applications engineers. Expert assistance in finding parts, usually within one business day.
- Part number suffixes: T or T&R = tape and reel; + = RoHS/lead-free; # = RoHS/lead-exempt; -D = drypack; -U/+U on DS parts = cut tape. More: See Full Data Sheet or Maxim Product Naming Conventions.
- * Some packages have variations, listed on the drawing. "PkgCode/Variation" tells which variation the product uses. Note that "+", "#", "-" in the part number suffix describes RoHS status. Package drawings may show a different suffix character.
|
Products with Similar Part Numbers
Didn't Find What You Need?
Information Index
Document Ref.: 19-4716
Rev 5;
2011-09-14
This page last modified: 2011-09-14
|
|
|
