|
|
|
MAX8844Y, MAX8844Z
28V Dual Input Linear Li+ Battery Chargers with Battery Detection and Overvoltage-Protected Output
Industry's First 30V Rated Dual Input 1-Cell Li+ Battery Chargers with Two Overvoltage-Protected Outputs
|
Status
Active: In Production.
Description
The MAX8844Z/MAX8844Y intelligent, stand-alone constant-current, constant-voltage (CCCV), thermally regulated dual input linear chargers are designed for charging a single-cell lithium-ion (Li+) battery. The MAX8844Z/MAX8844Y integrate a current-sense circuit, MOSFET pass element, thermal-regulation circuitry, and eliminate the external reverse-blocking Schottky diode to create the simplest and smallest charging solutions for handheld equipment.
The IC controls the charging sequence from the prequalification state through constant current fast-charge, top-off charge, and full-charge indication. Proprietary thermal-regulation circuitry limits the die temperature during fast-charging or when the IC is exposed to high ambient temperatures, allowing maximum charging current without damaging the IC.
The MAX8844Z/MAX8844Y achieve high flexibility by providing adjustable fast-charge currents (SETI) and an adjustable top-off current threshold (MIN) through external resistors. The IC features a booting assistant circuit that distinguishes input sources and battery connection and provides an enable signal (ABO, active-low ABO) for system booting.
The ICs also integrate two input overvoltage-protected LDO outputs (SAFEOUT, SAFEUSB) for low-voltage-rated USB or charger inputs in system, and a battery pack detection circuit (DETBAT) that disables the charger when the battery pack is absent. Other features include an active-low control input (active-low EN), an active-low input power source detection output (active-low POK), and a fully charged top-off threshold detection output (active-low CHG).
The MAX8844Z/MAX8844Y automatically select between either the USB or IN source. If both sources are present at the same time, highest priority is given to the IN source. The IN source is selected to ensure the shortest charging time for the system since it is able to deliver the highest current.
The MAX8844Z/MAX8844Y accept an input supply range from 4.25V to 28V (IN and USB), but disable charging if the input voltage exceeds +7.5V to protect against unqualified or faulty AC adapters. The ICs operate over the extended temperature range (-40°C to +85°C) and are available in a compact 14-pin, thermally enhanced, lead-free TDFN 3mm x 3mm package (0.8mm max height).
|
|
Data Sheet
|
An evaluation kit is available: MAX8844ZEVKIT
Key Features
- CCCV, Thermally Regulated Linear One-Cell Li+ Battery Charger
- No External MOSFET, Reverse Blocking Diode, or Current-Sense Resistor
- Programmable Fast-Charge Currents (1ARMS max)
- Programmable Top-Off Current Threshold
- Input Overvoltage Protected 4.7V Output (SAFEOUT) from IN
- Input Overvoltage Protected 4.7V Output (SAFEUSB) from USB
- Proprietary Die Temperature Regulation Control (+115°C)
- 4.25V to 28V Input Voltage Range with Input Overvoltage Protection Above +7.5V
- Low-Dropout Voltage (300mV at 500mA)
- Input Power-Source Detection Output (Active-Low POK), Charge Status Output (Active-Low CHG), Charge-Enable Input (Active-Low EN)
- Output for Autobooting (ABO, MAX8844Z)
- Output for Autobooting (Active-Low ABO, MAX8844Y)
- Tiny 3mm x 3mm, 14-Pin TDFN Package, 0.8mm Height (max)
|
|
Applications/Uses
- Bluetooth® Equipment
- Cellular and Cordless Phones
- Charging Cradles and Docks
- Digital Still Cameras
- MP3 Players
- Smart Phones and PDAs
- USB Appliances
|
|
|
|
Key Specifications:
| Battery Chargers |
| Part Number |
Cell Chemistry |
Lithium Ion Cells |
Protected VIN
(V) |
Charging VIN
(V) |
Charge Rate Set by |
Max. ICHG
(A) |
Charge Termination |
Charge Regulation |
EV Kit |
Oper. Temp.
(°C) |
Package/Pins |
| max |
max |
≥ |
| MAX8844 |
|
1 |
28 |
7 |
Resistor |
1 |
External Control |
Linear |
No |
-40 to +85 |
|
|
See All Battery Chargers (68)
|
Pricing Notes:
This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific prices and delivery, please see the price and availability page or contact an authorized distributor.
|
|
Diagram
Typical Operating Circuit
Product Guides
Reliability Reports
Software/Models
Ordering Information
|
Part Number
|
Free
Sample |
Buy |
Status
|
Package:
TYPE PINS FOOTPRINT
DRAWING CODE/VAR *
|
Temp |
RoHS/Lead-Free?
Materials Analysis
|
| MAX8844YETD+T
|
|
|
Active |
TDFN-EP;14 pin;9.6 mm²
Outline Drawing:21-0137 (PDF)
Land Pattern: 90-0063 (PDF)
Use pkgcode/variation: T1433+2*
|
-40°C to +85°C
|
RoHS/Lead-Free: Lead Free
Materials Analysis |
| MAX8844ZETD+T
|
|
|
Active |
TDFN-EP;14 pin;9.6 mm²
Outline Drawing:21-0137 (PDF)
Land Pattern: 90-0063 (PDF)
Use pkgcode/variation: T1433+2*
|
-40°C to +85°C
|
RoHS/Lead-Free: Lead Free
Materials Analysis |
Notes:
- Other options and links for purchasing parts are listed at: http://www.maxim-ic.com/sales.
- Didn't Find What You Need? Ask our applications engineers. Expert assistance in finding parts, usually within one business day.
- Part number suffixes: T or T&R = tape and reel; + = RoHS/lead-free; # = RoHS/lead-exempt; -D = drypack; -U/+U on DS parts = cut tape. More: See Full Data Sheet or Maxim Product Naming Conventions.
- * Some packages have variations, listed on the drawing. "PkgCode/Variation" tells which variation the product uses. Note that "+", "#", "-" in the part number suffix describes RoHS status. Package drawings may show a different suffix character.
|
Similar Products by Function
Similar Products by Application
Evaluation Kits
Products with Similar Part Numbers
More Information
Didn't Find What You Need?
Information Index
Document Ref.: 19-4279
Rev 0;
2009-03-11
This page last modified: 2009-07-13
|
|
|
Download
E-Mail