DS2741

Current Monitor and Accumulator with Integrated Sense Resistor

High-Side Current Sensing Allows Detection of Downstream Failure and Avoids Ground Disturbance

 Overview   Technical Documents   Ordering Info   Related Products   User Comments (0)   All   


Status Explanations for product status codes

Active: In Production.

Description

The DS2741 current monitor/accumulator is a complete current-sensing, measuring, and accumulation device tailored for cost-sensitive, battery-powered applications in a small 3mm x 3mm TDFN package. As a result, the DS2741 is a key component in battery-charge control and remaining capacity-estimation applications.

Through its I²C interface, the DS2741 gives the host system access to current measurement and accumulation registers. The 7-bit slave address is factory programmable, allowing up to 128 devices to be individually addressed by the host system.
 

Data Sheet

Download this datasheet in PDF formatDownload Rev 1 (PDF, 176kB)
Send this datasheet to any email addressE-Mail
NOTE: This product uses the following:
DS2741K Evaluation Kit Software

Key Features

  • Complete, Low-Cost, Integrated Current-Sensing and Accumulation Solution with Serial Digital Output
  • On-Board 38mΩ Sense Resistor
  • Current Measurement:
    • Signed 10-Bit Bidirectional Measurement
    • ±2.5A Dynamic Range
    • 1% Error at +25°C
    • 2% Error Over Temperature
  • Current Accumulation:
    • 0.247mAhr LSB
    • ±8.1Ahrs Full-Scale Range
  • Industry-Standard I²C Interface with Factory-Programmable Slave Address
  • 2.5V to 4.5V Single-Supply Operation
  • Low-Power Consumption:
    • Active Current: 60µA (typ)
    • Sleep Current: 1µA (typ)
  • -20°C to +70°C Operating Range
  • 14-Pin TDFN (3mm x 3mm x 0.8mm)
 

Applications/Uses

  • Battery Monitor/Rechargers
  • Cell Phones
  • PDAs
   

Key Specifications:

Battery Protectors, Selectors and Monitors
Part Number Functions Battery Type Interface Parameters Measured VSUPPLY
(V)
VSUPPLY
(V)
Package/Pins Smallest Available Pckg.
(mm2)
Oper. Temp.
(°C)
Budgetary Price
min max max w/pins See Notes
DS2741  Fuel Gauge 1 Cell Li-Ion 2-Wire
Current
Temperature
Time
2.5 4.5
TDFN-EP/14
9.6 -20 to +70 $1.62 @1k
See All Battery Protectors, Selectors and Monitors (29)
Pricing Notes:
This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific prices and delivery, please see the price and availability page or contact an authorized distributor.


Diagram

DS2741: Typical Operating Circuit
Typical Operating Circuit

More Information

New Product Press Release 2009-04-13 ]

Didn't Find What You Need?

Information Index

Document Ref.: 19-4683 Rev 1; 2009-07-27
This page last modified: 2009-07-27




Contact Us     |     Privacy Policy     |     Legal Notices
Copyright © 2012 by Maxim Integrated Products