|
DS2786B
Stand-Alone OCV-Based Fuel Gauge
2-Wire Standalone Fuel Gauge Requires No Learn Cycle to Provide Initial Capacity Estimate or Maintain Accuracy During Use; Now Optimized for Smartphones with Push-Mail Feature
|
Status
Description
The DS2786B estimates available capacity for rechargeable Li-ion (Li+) and Li+ polymer batteries based on the cell voltage in the open-circuit state following a relaxation period. The open-circuit voltage (OCV) is used to determine relative cell capacity based on a lookup table stored in the IC. This capability makes accurate capacity information available immediately after a battery pack is inserted. During periods of moderate to high rate discharging, which preclude OCV measurements, the DS2786B uses coulomb counting as a secondary means of estimating relative capacity.
Remaining capacity is reported in percent, along with cell voltage, current, and temperature information. Cell characteristics and application parameters used in the calculations are stored in on-chip EEPROM.
The DS2786B is intended for use on the host side of portable devices, though it can also be mounted within a battery pack. Measurement and estimated capacity data are accessed through an I²C interface. Temperature data is available from an on-die sensor. Resistance measurements of a pack identification resistor and pack thermistor are supported by ratiometric measurements on two auxiliary inputs.
The DS2786B comes in a 10-pin, lead-free, TDFN 3mm x 3mm package with an exposed pad (EP).
|
|
Data Sheet
|
Key Features
- Relative Capacity Calculated from Combination Coulomb Counter and Open-Circuit Cell Voltage (OCV) Battery Model
- Accurate Warning of Low-Battery Conditions Even on First Cycle (No Learn Cycle Needed)
- 12-Bit Battery Voltage Measurement
- ±10mV Accuracy
- 1.22mV LSB, 0V to 4.5V Input Range
- 11-Bit Bidirectional Current Measurement
- 25µV LSB, ±51.2mV Dynamic Range
- 1.67mA LSB, ±3.4A (RSNS = 15mΩ)
- Current Accumulation Measurement Resolution
- ±204.8mVh Range
- ±13.65Ah (RSNS = 15mΩ)
- Internal Temperature Measurement
- 0.125°C LSB, ±3°C Accuracy
- Two 11-Bit Auxiliary Input-Voltage Measurements
- ±8 LSB Accuracy, Ratiometric Inputs Eliminate Supply Accuracy Issues
- VOUT Pin Drives Resistive Dividers, Reduces Current Consumption
- 2-Wire Interface
- Low Power Consumption
- Active Current: 50µA (typ), 80µA (max)
- Sleep Current: 1µA (typ), 3µA (max)
|
|
Applications/Uses
- 3G Multimedia Wireless Handsets
- Digital Audio (MP3) Players
- Digital Still Cameras
|
|
|
|
Key Specifications:
| Battery Protectors, Selectors and Monitors |
| Part Number |
Functions |
Battery Type |
Interface |
User Data Storage
(Bytes) |
Parameters Measured |
VSUPPLY
(V) |
VSUPPLY
(V) |
Package/Pins |
Smallest Available Pckg.
(mm2) |
Oper. Temp.
(°C) |
Budgetary Price |
| min |
max |
max w/pins |
See Notes |
| DS2786B |
Fuel Gauge |
1 Cell Li-Ion |
2-Wire |
32 EEPROM |
| Current | | Temperature | | Voltage |
|
2.5 |
4.5 |
|
9.6 |
-40 to +85 |
$1.53 @1k |
|
See All Battery Protectors, Selectors and Monitors (29)
|
Pricing Notes:
This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific prices and delivery, please see the price and availability page or contact an authorized distributor.
|
|
Diagram
Operating Diagram
Application Notes
Reliability Reports
Software/Models
Ordering Information
|
Part Number
|
Free
Sample |
Buy |
Status
|
Recommended Replacement |
Package:
TYPE PINS FOOTPRINT
DRAWING CODE/VAR *
|
Temp |
RoHS/Lead-Free?
Materials Analysis
|
| DS2786BEVKIT+
|
|
|
Active |
|
KIT;
Land Pattern: Not Available
|
|
See data sheet
|
| DS2786BG+
|
|
|
Active |
|
TDFN-EP;10 pin;9.6 mm²
Outline Drawing:21-0137 (PDF)
Land Pattern: 90-0003 (PDF)
Use pkgcode/variation: T1033+1*
|
-40°C to +85°C
|
RoHS/Lead-Free: Lead Free
Materials Analysis |
| DS2786BG+T&R
|
|
|
Active |
|
TDFN-EP;10 pin;9.6 mm²
Outline Drawing:21-0137 (PDF)
Land Pattern: 90-0003 (PDF)
Use pkgcode/variation: T1033+1*
|
-40°C to +85°C
|
RoHS/Lead-Free: Lead Free
Materials Analysis |
| DS2786BK
|
|
N/A |
No Longer Available |
DS2786BEVKIT+
|
TDFN-EP;10 pin;9.6 mm²
Outline Drawing:21-0137 (PDF)
Land Pattern: 90-0003 (PDF)
Use pkgcode/variation: T1033+1*
|
-40°C to +85°C
|
RoHS/Lead-Free: Lead Free
Materials Analysis |
Notes:
- Other options and links for purchasing parts are listed at: http://www.maxim-ic.com/sales.
- Didn't Find What You Need? Ask our applications engineers. Expert assistance in finding parts, usually within one business day.
- Part number suffixes: T or T&R = tape and reel; + = RoHS/lead-free; # = RoHS/lead-exempt; -D = drypack; -U/+U on DS parts = cut tape. More: See Full Data Sheet or Maxim Product Naming Conventions.
- * Some packages have variations, listed on the drawing. "PkgCode/Variation" tells which variation the product uses. Note that "+", "#", "-" in the part number suffix describes RoHS status. Package drawings may show a different suffix character.
|
Similar Products by Function
Similar Products by Application
Products with Similar Part Numbers
| DS2786 |
Stand-Alone OCV-Based Fuel Gauge |
| DS2786EVKIT |
Stand-Alone OCV-Based Fuel Gauge Evaluation Kit |
Didn't Find What You Need?
Information Index
Document Ref.: 19-5223
Rev 1;
2010-05-21
This page last modified: 2010-07-12
|
Download
E-Mail