|
|
|
MAX13170E
+5V Multiprotocol, 3Tx/3Rx, Software-Selectable Clock Transceivers
The MAX13170E is a Pin-for-Pin Upgrade to the MXL1543B
|
Status
Description
The MAX13170E is a three-driver/three-receiver multiprotocol transceiver that operates from a +5V single supply. The MAX13170E, along with the MAX13172E and the MAX13174E, form a complete software-selectable data terminal equipment (DTE) or data communication equipment (DCE) interface port that supports the V.28 (RS-232), V.10/V.11 (RS-449/V.36, EIA-530, EIA-530A, X.21), and V.35 protocols. The MAX13170E transceivers carry the high-speed clock and data signals, while the MAX13172E carry the control signals. The MAX13170E can be terminated by the MAX13174E software-selectable resistor termination network or by discrete termination networks.
The MAX13170E has an internal charge pump and a proprietary low-dropout transmitter output stage that allows V.11-, V.28-, and V.35-compliant operation from a +5V single supply. The MAX13170E features a nocable mode that reduces supply current to 0.5µA, and disables all (high-impedance) transmitter and receiver outputs. Short-circuit current limiting and thermal shutdown circuitry protect the receiver and transmitter outputs against excessive power dissipation. The MAX13170E has extended ESD protection for all the transmitter outputs and receivers inputs.
The MAX13170E is available in a 5.3mm x 10.2mm, 28-pin SSOP package and operates over the 0°C to +70°C commercial temperature range.
|
|
Data Sheet
|
An evaluation kit is available: MAX13170EEVKIT, MAX13172EEVKIT, MAX13174EEVKIT
Key Features
- The MAX13170E/MAX13172E/MAX13174E Chipset is a Pin-for-Pin Upgrade to the MXL1544/MAX3175/MXL1543/MXL1543B Chipset
- Supports RS-232, RS-449, EIA-530, EIA-530A, V.35, V.36, and X.21
- Software-Selectable Cable Termination Using the MAX13174E
- Complete DTE or DCE Port with the MAX13172E/MAX13174E
- Fail-Safe Receivers
- +5V Single-Supply Operation
- 0.5µA No-Cable Mode
- TUV-Certified NET1/NET2 and TBR1/TBR2-Compliant (Pending)
- Extended ESD Protection for All the Transmitter Outputs and Receivers Inputs to GND
- ±13kV Using the Human Body Model
- ±8kV Using the Contact Method Specified in IEC 61000-4-2
- ±5kV Using the Air-Gap Discharge Method Specified in IEC 61000-4-2
|
|
Applications/Uses
- CSU and DSU
- Data Networking
- Data Routers
- PCI Cards
- Telecommunication Equipment
|
|
|
|
Key Specifications:
| Multiprotocol Transceivers |
| Part Number |
Functions |
RS-232 Data Rate
(Mbps) |
RS-485 Data Rate
(Mbps) |
Single Ended Tx/Rx |
Diff. Tx/Rx |
Supported Protocols |
DCE/ DTE Interchg. |
On Chip Charge Pump |
ICC
(mA) |
ISHUTDN
(µA) |
| max |
max |
max |
| MAX13170E |
Multiprotocol Clock and Data Transceiver |
0.24 |
40 |
3/3 |
3/3 |
| RS-232 | | RS-449 | | RS-530 | | RS-530A | | V.10 | | V.11 | | V.28 | | V.35 | | V.36 | | X.21 |
|
Yes |
Yes |
195 |
10 |
|
See All Multiprotocol Transceivers (23)
|
Pricing Notes:
This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific prices and delivery, please see the price and availability page or contact an authorized distributor.
|
|
Diagram
Typical Operating Circuit
Product Guides
Reliability Reports
Software/Models
Ordering Information
|
Part Number
|
Free
Sample |
Buy |
Status
|
Recommended Replacement |
Package:
TYPE PINS FOOTPRINT
DRAWING CODE/VAR *
|
Temp |
RoHS/Lead-Free?
Materials Analysis
|
| MAX13170ECAI
|
|
|
Active |
|
SSOP;28 pin;81.6 mm²
Outline Drawing:21-0056 (PDF)
Land Pattern: 90-0095 (PDF)
Use pkgcode/variation: A28-2*
|
0°C to +70°C
|
RoHS/Lead-Free: No
Materials Analysis |
| MAX13170ECAI+
|
|
|
Active |
|
SSOP;28 pin;81.6 mm²
Outline Drawing:21-0056 (PDF)
Land Pattern: 90-0095 (PDF)
Use pkgcode/variation: A28+2*
|
0°C to +70°C
|
RoHS/Lead-Free: Lead Free
Materials Analysis |
| MAX13170ECAI+T
|
|
|
Active |
|
SSOP;28 pin;81.6 mm²
Outline Drawing:21-0056 (PDF)
Land Pattern: 90-0095 (PDF)
Use pkgcode/variation: A28+2*
|
0°C to +70°C
|
RoHS/Lead-Free: Lead Free
Materials Analysis |
| MAX13170ECAI-T
|
|
|
Active |
|
SSOP;28 pin;81.6 mm²
Outline Drawing:21-0056 (PDF)
Land Pattern: 90-0095 (PDF)
Use pkgcode/variation: A28-2*
|
0°C to +70°C
|
RoHS/Lead-Free: No
Materials Analysis |
| MAX13170EEAI+
|
|
|
Active |
|
SSOP;28 pin;81.6 mm²
Outline Drawing:21-0056 (PDF)
Land Pattern: 90-0095 (PDF)
Use pkgcode/variation: A28+2*
|
-40°C to +85°C
|
RoHS/Lead-Free: Lead Free
Materials Analysis |
| MAX13170EEAI+T
|
|
|
Active |
|
SSOP;28 pin;81.6 mm²
Outline Drawing:21-0056 (PDF)
Land Pattern: 90-0095 (PDF)
Use pkgcode/variation: A28+2*
|
-40°C to +85°C
|
RoHS/Lead-Free: Lead Free
Materials Analysis |
| MAX13170EVKIT+
|
|
N/A |
No Longer Available |
MAX13170EEVKIT+
|
KIT;
Land Pattern: Not Available
|
|
See data sheet
|
Notes:
- Other options and links for purchasing parts are listed at: http://www.maxim-ic.com/sales.
- Didn't Find What You Need? Ask our applications engineers. Expert assistance in finding parts, usually within one business day.
- Part number suffixes: T or T&R = tape and reel; + = RoHS/lead-free; # = RoHS/lead-exempt; -D = drypack; -U/+U on DS parts = cut tape. More: See Full Data Sheet or Maxim Product Naming Conventions.
- * Some packages have variations, listed on the drawing. "PkgCode/Variation" tells which variation the product uses. Note that "+", "#", "-" in the part number suffix describes RoHS status. Package drawings may show a different suffix character.
|
Notes and Comments
This Clock/Data transceiver is a pin-for-pin upgrade to the MXL1543B. The MAX13170E, MAX13172E and MAX13174E form a complete chipset upgrade to the existing MXL1543B, MXL1544, and MXL1344 Multiprotocol Chipset.
Similar Products by Function
Evaluation Kits
Products with Similar Part Numbers
More Information
Didn't Find What You Need?
Information Index
Document Ref.: 19-3800
Rev 0;
2008-05-20
This page last modified: 2011-01-14
|
|
|
Download
E-Mail