|
|
|
MAX5961
0 to 16V, Quad, Hot-Swap Controller with 10-Bit Current and Voltage Monitor
Industry's First Quad, Hot-Swap Controller Operates Down to 0V and Integrates a Voltage and Current Monitor
|
Status
| Part Number |
Status |
|
MAX5961
|
Custom Order: Minimum order quantities and other restrictions may apply. |
Description
The MAX5961 0 to 16V, quad, hot-swap controller provides complete protection for systems with up to four distinct supply voltages. The device allows the safe insertion and removal of circuit cards into live backplanes. The MAX5961 is an advanced hot-swap controller that monitors voltage and current with an internal 10-bit ADC. The device provides two levels of overcurrent circuit-breaker protection; a fast-trip threshold for a fast turn-off, and a lower slow-trip threshold for a delayed turn-off. The maximum overcurrent circuit-breaker threshold range is set independently for each channel with a trilevel input (ILIM_) or by programming though an I²C interface.
The internal 10-bit ADC is multiplexed to monitor the output voltage and current of each hot-swap channel. The total time to cycle through all the eight measurements is 100µs (typ). Each 10-bit value is stored in an internal circular buffer so that 50 past samples of each signal can be read back through the I²C interface at any time or after a fault condition.
The MAX5961 can be configured as four independent hot-swap controllers, hot-swap controllers operating in pairs, or as a group of four hot-swap controllers.
The device also includes five digital comparators per hot-swap channel to implement overcurrent warning, two levels of overvoltage detection, and two levels of undervoltage detection. The limits for overcurrent, overvoltage, and undervoltage are user-programmable. When any of the measured values violates the programmable limits, an external active-low ALERT signal is asserted. In addition to the active-low ALERT signal, depending on the selected operating mode, the MAX5961 can deassert a power-good signal and/or turn-off the external MOSFET.
The MAX5961 is available in a 48-pin thin QFN package and operates over the -40°C to +85°C extended temperature range.
|
|
Data Sheet
|
An evaluation kit is available: MAX5961EVKIT
Key Features
- Four Independent Hot-Swap Controllers Protect from 0 to 16V (Provided IN ≥ 2.7V)
- 10-Bit ADC Monitors Voltage and Current of Each Channel
- Circular Buffer Stores 5ms of Current and Voltage Measurements
- Four Independent Internal Charge Pumps Generate n-Channel MOSFET Gate Drives
- Internal 500mA Gate Pulldown Current for Fast Shutdown
- VariableSpeed/BiLevel™ Circuit-Breaker Protection
- Alert Output Indicates Undervoltage Warning, Undervoltage Critical, Overvoltage Warning, Overvoltage Critical, and Overcurrent Warning for Each Channel
- Independent Power-Good Outputs
- Autoretry or Latched Fault Management
- 400kHz I²C Interface
- 7mm x 7mm 48-Pin TQFN Package
|
|
Applications/Uses
- ASICs
- Disk Drives
- PCI Express® Hot Plug
- Servers
- Storage Systems
|
|
|
|
Key Specifications:
| Hot Swap Controllers |
| Part Number |
VIN
(V) |
VIN
(V) |
Circuit Breaker/ Current Limit |
Circuit Breaker/Current Limit Threshold
(mV) |
Fault Condition Control |
Channels |
Positive/Negative Rail |
Package/Pins |
Budgetary Price |
| min |
max |
See Notes |
| MAX5961 |
2.7 |
16 |
Circuit Breaker |
25 to 100 |
Programmable |
4 |
Positive |
|
$9.37 @1k |
|
See All Hot Swap Controllers (53)
|
Pricing Notes:
This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific prices and delivery, please see the price and availability page or contact an authorized distributor.
|
|
Application Notes
Product Guides
Reliability Reports
Software/Models
Ordering Information
|
Part Number
|
Free
Sample |
Buy |
Status
|
Package:
TYPE PINS FOOTPRINT
DRAWING CODE/VAR *
|
Temp |
RoHS/Lead-Free?
Materials Analysis
|
| MAX5961ETM+
|
|
|
Custom Order |
TQFN;48 pin;50.4 mm²
Outline Drawing:21-0144 (PDF)
Land Pattern: 90-0132 (PDF)
Use pkgcode/variation: T4877+6*
|
-40°C to +85°C
|
RoHS/Lead-Free: Lead Free
Materials Analysis |
| MAX5961ETM+T
|
|
|
Custom Order |
TQFN;48 pin;50.4 mm²
Outline Drawing:21-0144 (PDF)
Land Pattern: 90-0132 (PDF)
Use pkgcode/variation: T4877+6*
|
-40°C to +85°C
|
RoHS/Lead-Free: Lead Free
Materials Analysis |
Notes:
- Other options and links for purchasing parts are listed at: http://www.maxim-ic.com/sales.
- Didn't Find What You Need? Ask our applications engineers. Expert assistance in finding parts, usually within one business day.
- Part number suffixes: T or T&R = tape and reel; + = RoHS/lead-free; # = RoHS/lead-exempt; -D = drypack; -U/+U on DS parts = cut tape. More: See Full Data Sheet or Maxim Product Naming Conventions.
- * Some packages have variations, listed on the drawing. "PkgCode/Variation" tells which variation the product uses. Note that "+", "#", "-" in the part number suffix describes RoHS status. Package drawings may show a different suffix character.
|
Similar Products by Function
Similar Products by Application
Evaluation Kits
Products with Similar Part Numbers
More Information
Didn't Find What You Need?
Information Index
Document Ref.: 19-4167
Rev 1;
2011-05-27
This page last modified: 2011-05-27
|
|
|
