Status
Active: In Production.
Description
The MAX5092 evaluation kit (EV kit) is a fully assembled
and tested surface-mount printed-circuit board (PCB)
demonstrating the MAX5092B, a low-dropout (LDO) regulator
with internal boost preregulator. The EV kit operates
from a 4V to 72V input voltage and delivers up to
250mA from a preprogrammed 7V boost preregulator
output (BSOUT) and 5V LDO output (VOUT). Both the
LDO and the boost preregulator output voltages are programmable
using external resistors.
The MAX5092 EV kit features include on-board jumper
settings that allow for evaluation of the ENABLE and
active-low HOLD functions of the MAX5092, a power-on-reset output
(active-low RESET) to indicate LDO out-of-regulation conditions,
and a programmable active-low RESET time period.
The MAX5092 EV kit can be configured to demonstrate
the MAX5092A (3.3V LDO output) or the MAX5093A/MAX5093B. To evaluate the MAX5092A, replace the IC with the MAX5092A. To evaluate the MAX5093_, the
addition of an external Schottky diode is required. See
the Configuring for the MAX5093_ section in the full data sheet to modify the MAX5092 EV kit for the MAX5093_.
The EV kit comes fully assembled and tested, is qualified
lead-free, and is rated for an operating temperature
range of 0°C to +70°C.
Warning: The MAX5092 EV kit is designed to operate
with high voltages. Dangerous voltages can be present
on this EV kit and on equipment connected to it. Users
who power up this EV kit, or the power sources connected
to it, must be careful to follow safety procedures
appropriate when working with high-voltage electrical
equipment.
|
|
Data Sheet
|
Download
E-Mail