Maxim > Products > Automotive > MAX15024, MAX15025
Maxim > Products > Power and Battery Management > MAX15024, MAX15025

MAX15024, MAX15025

Single/Dual, 16ns, High Sink/Source Current Gate Drivers

4A, 20ns, Dual MOSFET Drivers Available in 3mm x 3mm, Thermally Enhanced TDFN Package

 Overview   Technical Documents   Ordering Info   Related Products   User Comments (0)   All   


Status Explanations for product status codes

Part Number Status
MAX15024 Active: In Production. See Ordering Information for details.
MAX15025 Active: In Production. See Ordering Information for details.

Description

The MAX15024/MAX15025 single/dual, high-speed MOSFET gate drivers are capable of operating at frequencies up to 1MHz with large capacitive loads. The MAX15024 includes internal source-and-sink output transistors with independent outputs allowing for control of the external MOSFET's rise and fall time. The MAX15024 is a single gate driver capable of sinking an 8A peak current and sourcing a 4A peak current. The MAX15025 is a dual gate driver capable of sinking a 4A peak current and sourcing a 2A peak current. An integrated adjustable LDO voltage regulator provides gate-drive amplitude control and optimization.

The MAX15024A and MAX15025A/C accept transistor-to-transistor (TTL) input logic levels while the MAX15024B and MAX15025B/D accept CMOS-input logic levels. High sourcing/sinking peak currents, a low propagation delay, and thermally enhanced packages make the MAX15024/MAX15025 ideal for high-frequency and high-power circuits. The MAX15024/MAX15025 operate from a 4.5V to 28V supply. A separate output driver supply input enhances flexibility and permits a soft-start of the power MOSFETs used in synchronous rectifiers.

The MAX15024/MAX15025 are available in 10-pin TDFN packages and are specified over the -40°C to +125°C automotive temperature range.
 

Data Sheet

Download this datasheet in PDF formatDownload Rev 3 (PDF, 404kB)
Send this datasheet to any email addressE-Mail

Key Features

  • 8A Peak Sink Current/4A Peak Source Current (MAX15024)
  • 4A Peak Sink Current/2A Peak Source Current (MAX15025)
  • Low 16ns Propagation Delay
  • 4.5V to 28V Supply Voltage Range
  • On-Board Adjustable LDO for Gate-Drive Amplitude Control and Optimization
  • Separate Output Driver Supply
  • Independent Source and Sink Outputs (MAX15024)
  • Matched Delays Between Inverting and Noninverting Inputs (MAX15024)
  • Matched Delays Between Channels (MAX15025)
  • CMOS or TTL Logic-Level Inputs with Hysteresis for Noise Immunity
  • -40°C to +125°C Operating Temperature Range
  • Thermal-Shutdown Protection
  • 1.95W Thermally Enhanced TDFN Power Packages
  • AEC-Q100 Qualified
 

Applications/Uses

  • Power-Supply Modules
  • Switching Power Supply
  • Synchronous Rectifier Drivers
   

Key Specifications:

Low-Side MOSFET Drivers
Part Number Description IOUT
(A)
RON
(Ω)
RON
(Ω)
Rise/ Fall Time @+25°C
(ns)
VSUPPLY
(V)
VSUPPLY
(V)
Oper. Temp.
(°C)
Package/Pins Smallest Available Pckg.
(mm2)
Budgetary Price
peak typ max max min max max w/pins See Notes
MAX15024A  Single Inverting or Noninverting 4 0.875 2 12/8 (CL=5000 pF) 4.5 28 -40 to +125
TDFN-EP/10
9.6 $1.59 @1k
MAX15024B  Single Inverting or Noninverting 4
TDFN-EP/10
$3.07 @1k
MAX15025A  Dual Noninverting 2
TDFN-EP/10
$1.99 @1k
MAX15025B  Dual Inverting 2
TDFN-EP/10
$1.99 @1k
MAX15025C  Dual Mixed 2
TDFN-EP/10
$1.99 @1k
See All Low-Side MOSFET Drivers (20)
Pricing Notes:
This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific prices and delivery, please see the price and availability page or contact an authorized distributor.


Diagram

MAX15024, MAX15025: Block Diagrams
Block Diagrams

Product Guides

Enterprise Power (PDF)

Reliability Reports

Reliability Report: MAX15024.pdf
Show FIT data for:
Request Reliability Report for:

Software/Models

MAX15024 PSPICE Macromodel
MAX15025C PSPICE Macromodel

Ordering Information

Filters: Part Number: Package: Temperature: Tape and Reel Sample
Part Number Free
Sample
Buy Status Explanations for product status codes Recommended Replacement Package:
TYPE PINS FOOTPRINT
DRAWING  CODE/VAR *
Temp RoHS/Lead-Free?
Materials Analysis
MAX15024AATB+  
Active   TDFN-EP;10 pin;9.6 mm²
Outline Drawing:21-0137 (PDF)
Land Pattern: 90-0003 (PDF)
Use pkgcode/variation: T1033+1*
-40°C to +125°C RoHS/Lead-Free: Lead Free
Materials Analysis
MAX15024AATB+T    
Active   TDFN-EP;10 pin;9.6 mm²
Outline Drawing:21-0137 (PDF)
Land Pattern: 90-0003 (PDF)
Use pkgcode/variation: T1033+1*
-40°C to +125°C RoHS/Lead-Free: Lead Free
Materials Analysis
MAX15024AATB/V+T    
Active   TDFN-EP;10 pin;9.6 mm²
Outline Drawing:21-0137 (PDF)
Land Pattern: 90-0003 (PDF)
Use pkgcode/variation: T1033+1*
-40°C to +125°C RoHS/Lead-Free: Lead Free
Materials Analysis
MAX15024BATB+T    
Active   TDFN-EP;10 pin;9.6 mm²
Outline Drawing:21-0137 (PDF)
Land Pattern: 90-0003 (PDF)
Use pkgcode/variation: T1033+1*
-40°C to +125°C RoHS/Lead-Free: Lead Free
Materials Analysis
MAX15024CATB+T     N/A No Longer Available MAX15024AATB+T

 
TDFN-EP;10 pin;9.6 mm²
Outline Drawing:21-0137 (PDF)
Land Pattern: 90-0003 (PDF)
Use pkgcode/variation: T1033+1*
-40°C to +125°C RoHS/Lead-Free: Lead Free
Materials Analysis
MAX15024DATB+T     N/A No Longer Available MAX15024BATB+T

 
TDFN-EP;10 pin;9.6 mm²
Outline Drawing:21-0137 (PDF)
Land Pattern: 90-0003 (PDF)
Use pkgcode/variation: T1033+1*
-40°C to +125°C RoHS/Lead-Free: Lead Free
Materials Analysis
MAX15025AATB+  
Active   TDFN-EP;10 pin;9.6 mm²
Outline Drawing:21-0137 (PDF)
Land Pattern: 90-0003 (PDF)
Use pkgcode/variation: T1033+1*
-40°C to +125°C RoHS/Lead-Free: Lead Free
Materials Analysis
MAX15025AATB+T    
Active   TDFN-EP;10 pin;9.6 mm²
Outline Drawing:21-0137 (PDF)
Land Pattern: 90-0003 (PDF)
Use pkgcode/variation: T1033+1*
-40°C to +125°C RoHS/Lead-Free: Lead Free
Materials Analysis
MAX15025BATB+T    
Active   TDFN-EP;10 pin;9.6 mm²
Outline Drawing:21-0137 (PDF)
Land Pattern: 90-0003 (PDF)
Use pkgcode/variation: T1033+1*
-40°C to +125°C RoHS/Lead-Free: Lead Free
Materials Analysis
MAX15025CATB+  
Active   TDFN-EP;10 pin;9.6 mm²
Outline Drawing:21-0137 (PDF)
Land Pattern: 90-0003 (PDF)
Use pkgcode/variation: T1033+1*
-40°C to +125°C RoHS/Lead-Free: Lead Free
Materials Analysis
Part Number Free
Sample
Buy Status Explanations for product status codes Recommended Replacement Package:
TYPE PINS FOOTPRINT
DRAWING  CODE/VAR *
Temp RoHS/Lead-Free?
Materials Analysis
MAX15025CATB+T    
Active   TDFN-EP;10 pin;9.6 mm²
Outline Drawing:21-0137 (PDF)
Land Pattern: 90-0003 (PDF)
Use pkgcode/variation: T1033+1*
-40°C to +125°C RoHS/Lead-Free: Lead Free
Materials Analysis
MAX15025DATB+T    
Active   TDFN-EP;10 pin;9.6 mm²
Outline Drawing:21-0137 (PDF)
Land Pattern: 90-0003 (PDF)
Use pkgcode/variation: T1033+1*
-40°C to +125°C RoHS/Lead-Free: Lead Free
Materials Analysis
MAX15025EATB+T     N/A No Longer Available MAX15025AATB+T

 
TDFN-EP;10 pin;9.6 mm²
Outline Drawing:21-0137 (PDF)
Land Pattern: 90-0003 (PDF)
Use pkgcode/variation: T1033+1*
-40°C to +125°C RoHS/Lead-Free: Lead Free
Materials Analysis
MAX15025FATB+T     N/A No Longer Available MAX15025BATB+T

 
TDFN-EP;10 pin;9.6 mm²
Outline Drawing:21-0137 (PDF)
Land Pattern: 90-0003 (PDF)
Use pkgcode/variation: T1033+1*
-40°C to +125°C RoHS/Lead-Free: Lead Free
Materials Analysis
MAX15025GATB+T     N/A No Longer Available MAX15025CATB+T

 
TDFN-EP;10 pin;9.6 mm²
Outline Drawing:21-0137 (PDF)
Land Pattern: 90-0003 (PDF)
Use pkgcode/variation: T1033+1*
-40°C to +125°C RoHS/Lead-Free: Lead Free
Materials Analysis
MAX15025HATB+T     N/A No Longer Available MAX15025DATB+T

 
TDFN-EP;10 pin;9.6 mm²
Outline Drawing:21-0137 (PDF)
Land Pattern: 90-0003 (PDF)
Use pkgcode/variation: T1033+1*
-40°C to +125°C RoHS/Lead-Free: Lead Free
Materials Analysis

Notes:
  1. Other options and links for purchasing parts are listed at: http://www.maxim-ic.com/sales.
  2. Didn't Find What You Need? Ask our applications engineers. Expert assistance in finding parts, usually within one business day.
  3. Part number suffixes: T or T&R = tape and reel; + = RoHS/lead-free; # = RoHS/lead-exempt; -D = drypack; -U/+U on DS parts = cut tape. More: See Full Data Sheet or Maxim Product Naming Conventions.
  4. * Some packages have variations, listed on the drawing. "PkgCode/Variation" tells which variation the product uses. Note that "+", "#", "-" in the part number suffix describes RoHS status. Package drawings may show a different suffix character.

Similar Products by Function

MAX5048 7.6A, 12ns, SOT23/TDFN MOSFET Driver
MAX5078 4A, 20ns, MOSFET Driver
See All Low-Side MOSFET Drivers (26 Products)

Similar Products by Application

Automotive: Lidar Systems > MOSFET Driver
Computers: Desktops and Workstations > CPU Power
Computers: Desktops and Workstations > Isolated High-Voltage Power Supplies
Computers: Motherboards > CPU Core DC-DC Switching Power Supplies
Electric Vehicle Propulsion > Power Switch
Electric-Powered Bikes > Motor Drive
Motor Control > Gate Driver
Motor Control > MOSFET Drivers
Motor Control > Low-Side Gate Driver
Power Solutions for Nonportable Applications > MOSFET Drivers
Programmable Logic Controllers (PLCs) > Metal-Oxide Semiconductor Field-Effect Transistor (MOSFET)/Rectifier Driver
Telecom Switches (PBX and Central Office) > Isolated High-Voltage Power Supplies
Transport Nodes, Access Nodes, Add/Drop Multiplexers, and Digital Cross-Connects > Isolated High-Voltage Power Supplies
Uninterruptible Power Supply (UPS) > Metal-Oxide Semiconductor Field-Effect Transistor (MOSFET) Driver

More Information

Topmark Coding MAX15024
Topmark Coding MAX15025
New Product Press Release 2008-03-24 ]


Didn't Find What You Need?

Information Index

Document Ref.: 19-1053 Rev 3; 2011-05-02
This page last modified: 2011-05-02


 


Contact Us     |     Privacy Policy     |     Legal Notices
Copyright © 2012 by Maxim Integrated Products