|
|
|
MAX13041
±80V Fault-Protected High-Speed CAN Transceiver with Low-Power Management and Wake-On CAN
GIFT Certified CAN Transceiver Offering ±80V Fault Protection, Consuming Only 18µA Sleep Current
|
Status
Active: In Production.
Description
The MAX13041 ±80V fault-protected, high-speed controller area network (CAN) transceiver is ideal for high-speed
automotive network applications where high reliability and advanced power management are required. The device links a CAN protocol controller to the physical bus wires of the controller area network and allows communication at speeds up to 1Mbps.
The extended fault-protected voltage range of ±80V on CAN bus lines allows for use in +12V or +42V automotive, and higher voltage +24V and +36V mid-heavy truck applications. Advanced power management features make the MAX13041 ideal for automotive electronic control unit (ECU) modules that are permanently supplied by battery, regardless of the ignition switch position (clamp-30, Type-A modules). The device controls one or more external voltage regulators to provide a low power sleep mode for an entire clamp-30 node. Wake-on CAN capability allows the MAX13041 to restore power to the node upon detection of CAN bus activity.
The MAX13041 is functionally compatible with the Philips TJA1041A and is a pin-to-pin replacement with improved performance. The MAX13041 is available in a 14-pin SO package, and operates over the -40°C to +125°C automotive temperature range.
|
|
Data Sheet
|
Key Features
- Functionally Compatible Pin-to-Pin Replacement for the Philips TJA1041A
- ±12kV HBM ESD Protection on CANH, CANL
- ±80V Fault Protection on CANH, CANL, SPLIT; Up to +76V Operation on VBAT
- Fully Compatible with the ISO11898 Standard
- Low VBAT Supply Current in Standby and Sleep Modes (18µA Typical)
- Voltage Level Translation for Interfacing with +2.8V to +5.5V CAN Protocol Controllers
- Recessive Bus Stabilization (SPLIT)
- Allows Implementation of Large Networks
|
|
Applications/Uses
- +12V Automotive-Clamp 30 Modules
- +24V Mid-Heavy Truck- Clamp 30 Modules
- +42V Automotive-Clamp 30 Modules
- Military and Commercial Aircraft
|
|
|
|
Key Specifications:
| Controller Area Network (CAN) Transceivers |
| Part Number |
ICC (Dominant Mode)
(mA) |
Fault Protect.
(±V) |
Fault Tolerant |
ICC (Recessive Mode)
(mA) |
ICC (Shutdn.)
(µA) |
ESD Protect.
(±kV) |
Slew Rate Limiting |
VSUPPLY
(V) |
Package/Pins |
Budgetary Price |
| max |
typ |
typ |
See Notes |
| MAX13041 |
80 |
80 |
No |
6 |
1.8 (Standby Mode) |
12 |
No |
5 |
|
$1.25 @1k |
|
See All Controller Area Network (CAN) Transceivers (15)
|
Pricing Notes:
This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific prices and delivery, please see the price and availability page or contact an authorized distributor.
|
|
Diagram
Typical Operating Circuit
Application Notes
Product Guides
Reliability Reports
Software/Models
Ordering Information
|
Part Number
|
Free
Sample |
Buy |
Status
|
Package:
TYPE PINS FOOTPRINT
DRAWING CODE/VAR *
|
Temp |
RoHS/Lead-Free?
Materials Analysis
|
| MAX13041ASD+
|
|
|
Active |
SOIC(N);14 pin;54.3 mm²
Outline Drawing:21-0041 (PDF)
Land Pattern: 90-0112 (PDF)
Use pkgcode/variation: S14M+7*
|
-40°C to +125°C
|
RoHS/Lead-Free: Lead Free
Materials Analysis |
| MAX13041ASD+T
|
|
|
Active |
SOIC(N);14 pin;54.3 mm²
Outline Drawing:21-0041 (PDF)
Land Pattern: 90-0112 (PDF)
Use pkgcode/variation: S14M+7*
|
-40°C to +125°C
|
RoHS/Lead-Free: Lead Free
Materials Analysis |
| MAX13041ASD/V+
|
|
|
Active |
SOIC(N);14 pin;54.3 mm²
Outline Drawing:21-0041 (PDF)
Land Pattern: 90-0112 (PDF)
Use pkgcode/variation: S14M+7*
|
-40°C to +125°C
|
RoHS/Lead-Free: Lead Free
Materials Analysis |
| MAX13041ASD/V+T
|
|
|
Active |
N.SO;
Land Pattern: Not Available
|
-40°C to +125°C
|
See data sheet
|
Notes:
- Other options and links for purchasing parts are listed at: http://www.maxim-ic.com/sales.
- Didn't Find What You Need? Ask our applications engineers. Expert assistance in finding parts, usually within one business day.
- Part number suffixes: T or T&R = tape and reel; + = RoHS/lead-free; # = RoHS/lead-exempt; -D = drypack; -U/+U on DS parts = cut tape. More: See Full Data Sheet or Maxim Product Naming Conventions.
- * Some packages have variations, listed on the drawing. "PkgCode/Variation" tells which variation the product uses. Note that "+", "#", "-" in the part number suffix describes RoHS status. Package drawings may show a different suffix character.
|
Notes and Comments
Direct pin-for-pin and functional replacement to NXP TJA1041
Similar Products by Function
Similar Products by Application
More Information
Didn't Find What You Need?
Information Index
Document Ref.: 19-0747
Rev 2;
2009-03-16
This page last modified: 2009-08-26
|
|
|
Download
E-Mail