|
DS28EC20
20Kb 1-Wire EEPROM
20Kb Serial EEPROM Operates from Single-Contact 1-Wire Interface
|
Status
Active: In Production.
Description
The DS28EC20 is a 20480-bit, 1-Wire® EEPROM organized as 80 memory pages of 256 bits each. An additional page is set aside for control functions. Data is written to a 32-byte scratchpad, verified, and then copied to the EEPROM memory. As a special feature, blocks of eight memory pages can be write protected or put in EPROM-Emulation mode, where bits can only be changed from a 1 to a 0 state. The DS28EC20 communicates over the single-conductor 1-Wire bus. The communication follows the standard 1-Wire protocol. Each device has its own unalterable and unique 64-bit ROM registration number. The registration number is used to address the device in a multidrop 1-Wire net environment.
|
|
Data Sheet
|
An evaluation kit is available: DS9090K DS9120, DS9120P, DS9120Q
Key Features
- 20480 Bits of Nonvolatile (NV) EEPROM Partitioned into Eighty 256-Bit Pages
- Individual 8-Page Groups of Memory Pages (Blocks) can be Permanently Write Protected or Put in OTP EPROM-Emulation Mode ("Write to 0")
- Read and Write Access Highly Backward-Compatible to Legacy Devices (e.g., DS2433)
- 256-Bit Scratchpad with Strict Read/Write Protocols Ensures Integrity of Data Transfer
- 200k Write/Erase Cycle Endurance at +25°C
- Unique Factory-Programmed 64-Bit Registration Number Ensures Error-Free Device Selection and Absolute Part Identity
- Switchpoint Hysteresis and Filtering to Optimize Performance in the Presence of Noise
- Communicates to Host at 15.4kbps or 90kbps Using 1-Wire Protocol
- Low-Cost TO-92 Package
- Operating Range: 5V ±5%, -40°C to +85°C
- IEC 1000-4-2 Level 4 ESD Protection (8kV Contact, 15kV Air, Typical) for I/O Pin
|
|
Applications/Uses
- Card/Module Identification in Rack-Based Systems
- Device Authentication
- IEEE 1451.4 Sensors
- Ink and Toner Cartridge ID
- Medical and Industrial Sensor Identification/Calibration
- PCB Identification
- Smart Cable
|
|
|
|
Key Specifications:
| Memory (EPROM, EEPROM, ROM, NV SRAM) |
| Part Number |
Memory Type |
Memory Size |
Bus Type |
Real Time Clock |
DIP w/Int. Batt. |
Pwr. Cap Pckg. |
Battery Monitor |
GPIO |
Budgetary Price |
| See Notes |
| DS28EC20 |
EEPROM |
20K x 1 |
1-Wire |
No |
No |
No |
No |
No |
$1.38 @1k |
|
See All Memory (EPROM, EEPROM, ROM, NV SRAM) (58)
|
Pricing Notes:
This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific prices and delivery, please see the price and availability page or contact an authorized distributor.
|
|
Diagram
Typical Operating Circuit
Application Notes
Product Guides
Reliability Reports
Software/Models
Ordering Information
|
Part Number
|
Free
Sample |
Buy |
Status
|
Package:
TYPE PINS FOOTPRINT
DRAWING CODE/VAR *
|
Temp |
RoHS/Lead-Free?
Materials Analysis
|
| DS28EC20+
|
|
|
Active |
TO92;3 pin;19.5 mm²
Outline Drawing:21-0248 (PDF)
Land Pattern: Not Applicable
Use pkgcode/variation: Q3+1*
|
-40°C to +85°C
|
RoHS/Lead-Free: Lead Free
Materials Analysis |
| DS28EC20+T
|
|
|
Active |
TO92;3 pin;19.5 mm²
Outline Drawing:21-0248 (PDF)
Land Pattern: Not Applicable
Use pkgcode/variation: Q3+1*
|
-40°C to +85°C
|
RoHS/Lead-Free: Lead Free
Materials Analysis |
| DS28EC20P+
|
|
|
Active |
TSOC;6 pin;17.8 mm²
Outline Drawing:21-0382 (PDF)
Land Pattern: 90-0321 (PDF)
Use pkgcode/variation: D6+1*
|
-40°C to +85°C
|
RoHS/Lead-Free: Lead Free
Materials Analysis |
| DS28EC20P+T
|
|
|
Active |
TSOC;6 pin;17.8 mm²
Outline Drawing:21-0382 (PDF)
Land Pattern: 90-0321 (PDF)
Use pkgcode/variation: D6+1*
|
-40°C to +85°C
|
RoHS/Lead-Free: Lead Free
Materials Analysis |
Notes:
- Other options and links for purchasing parts are listed at: http://www.maxim-ic.com/sales.
- Didn't Find What You Need? Ask our applications engineers. Expert assistance in finding parts, usually within one business day.
- Part number suffixes: T or T&R = tape and reel; + = RoHS/lead-free; # = RoHS/lead-exempt; -D = drypack; -U/+U on DS parts = cut tape. More: See Full Data Sheet or Maxim Product Naming Conventions.
- * Some packages have variations, listed on the drawing. "PkgCode/Variation" tells which variation the product uses. Note that "+", "#", "-" in the part number suffix describes RoHS status. Package drawings may show a different suffix character.
|
Similar Products by Function
Similar Products by Application
Evaluation Kits
Products with Similar Part Numbers
Didn't Find What You Need?
Information Index
Document Ref.: 19-6067
Rev 3;
2011-11-17
This page last modified: 2011-11-17
|
Download
E-Mail