MAX2547

WCDMA/HSPA Band I RF-to-Bits Femto-Basestation Radio Receiver

Industry's First Complete RF-to-Digital Bits Receive Subsystem for WCDMA Band 1 Femto-Basestation Applications

 Overview   Technical Documents   Ordering Info   Related Products   User Comments (0)   All   


Status Explanations for product status codes

Active: Data sheet on request only

Description

The MAX2547 direct-conversion RF-to-bits radio receiver is designed for Band I (1920MHz to 1980MHz) WCDMA/HSPA femto-basestation applications. The receiver also features a separate dedicated receive path for the 2110MHz to 2170MHz band that enables monitoring of macro cell downlink activity (sniffer mode).

The unique RF-to-bits architecture of the MAX2547 integrates 2 LNAs, quadrature mixers, baseband anti-aliasing filters, programmable gain baseband amplifiers, high dynamic range I and Q sigma-delta analog-to-digital converters (ADCs), a fractional-N frequency synthesizer for local oscillator (LO) generation, and a fractional-N frequency synthesizer for sampling clock generation. Data is transferred from the radio to the baseband/DSP by a digital 1-bit sigma-delta-modulated I and Q bitstream through an LVDS-like interface. All decimation, compensation, and channel filtering is performed in the digital domain. Digital IP blocks are available from Maxim. The operating mode of the radio is fully programmable by a 3-wire serial interface.

The MAX2547 is specified for operation in the extended -40°C to +85°C temperature range and is available in a 7mm x 7mm x 1.4mm fcLGA package with exposed paddle (EP).
 

Data Sheet

Key Features

  • Complete RF-to-Digital-Bits-Out Radio Receiver Subsystem
  • Supports Band I (1920MHz to 1980MHz) WCDMA/HSPA Operation
  • Supports Sniffer Mode for Monitoring of Macro Cell Activity to Optimize Operating Parameters
  • Supports GSM Sniffer Mode in EGSM and DCS Bands
  • TS25.104 Compliant
  • Low Power Consumption; Typically 190mW at +2.85V
  • MAX-PHY Digital Rx Interface with Single-Bit I and Q Bitstreams Eliminates Analog Baseband Signals
  • Digital Output Bit Rate: 153.6Mbps in WCDMA Mode and 26Mbps in GSM Mode
  • Complete Two-Chip WCDMA/HSPA Basestation Radio Solution with MAX2599 Transmitter Reference Design Available
  • High Dynamic Range Sigma-Delta ADCs Allow Simple AGC Implementation with Switched Gain States
  • On-Chip Fractional-N Frequency Synthesizers for LO and Sampling Clock Generation
  • Dual Buffered Reference Outputs to Drive Transmit IC and Baseband/DSP
  • Operation Controlled Entirely by 3-Wire Serial Interface; No Analog Control Signals Necessary
  • Rail-to-Rail Outputs Controlled by Serial Interface for External Component Control
 

Applications/Uses

  • WCDMA/HSPA Band I Femto-Basestations
   

Key Specifications:

Femto RF Receivers
Part Number Noise Figure
(dB)
ISUPPLY
(mA)
Applications Band/ Freq.
(MHz)
Features Footprint
(mm x mm)
Package/Pins Smallest Available Pckg.
(mm2)
typ max w/pins
MAX2547  7.5 66 WCDMA/HSPA Band I Femto Basestations 2110 to 2170
Complete RF-to-Digital-Bits Radio Receiver
GSM Monitoring in EGSM and DCS Bands
Supports WCDMA Bands I
TS25.104 Compliant
7.0 x 7.0
FCLGA/48
50.4
See All Femto RF Receivers (3)
Pricing Notes:
This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific prices and delivery, please see the price and availability page or contact an authorized distributor.


Application Notes

Tutorial 5100   General Layout Guidelines for RF and Mixed-Signal PCBs

Product Guides

Wireless (PDF)

Reliability Reports

Reliability Report: MAX2547.pdf
Show FIT data for:

Software/Models

none

Ordering Information

Filters: Part Number: Package: Temperature: Tape and Reel Sample
Part Number Free
Sample
Buy Status Explanations for product status codes Package:
TYPE PINS FOOTPRINT
DRAWING  CODE/VAR *
Temp RoHS/Lead-Free?
Materials Analysis
MAX2547AELM+  
Active: Data sheet on request only FCLGA;48 pin;50.4 mm²
Outline Drawing:21-0152 (PDF)
Land Pattern: 90-0303 (PDF)
Use pkgcode/variation: L4877F+6*
-40°C to +85°C RoHS/Lead-Free: Lead Free
Materials Analysis
MAX2547AELM+T    
Active: Data sheet on request only FCLGA;48 pin;50.4 mm²
Outline Drawing:21-0152 (PDF)
Land Pattern: 90-0303 (PDF)
Use pkgcode/variation: L4877F+6*
-40°C to +85°C RoHS/Lead-Free: Lead Free
Materials Analysis
MAX2547AELM+TW    
Active: Data sheet on request only FCLGA;48 pin;50.4 mm²
Outline Drawing:21-0152 (PDF)
Land Pattern: 90-0303 (PDF)
Use pkgcode/variation: L4877F+6*
-40°C to +85°C RoHS/Lead-Free: Lead Free
Materials Analysis
MAX2547AELM+W    
Active: Data sheet on request only FCLGA;48 pin;50.4 mm²
Outline Drawing:21-0152 (PDF)
Land Pattern: 90-0303 (PDF)
Use pkgcode/variation: L4877F+6*
-40°C to +85°C RoHS/Lead-Free: Lead Free
Materials Analysis
MAX2547BELM+  
Active: Data sheet on request only FCLGA;48 pin;50.4 mm²
Outline Drawing:21-0152 (PDF)
Land Pattern: 90-0303 (PDF)
Use pkgcode/variation: L4877F+6*
-40°C to +85°C RoHS/Lead-Free: Lead Free
Materials Analysis
MAX2547BELM+T    
Active: Data sheet on request only FCLGA;48 pin;50.4 mm²
Outline Drawing:21-0152 (PDF)
Land Pattern: 90-0303 (PDF)
Use pkgcode/variation: L4877F+6*
-40°C to +85°C RoHS/Lead-Free: Lead Free
Materials Analysis
MAX2547BELM+TW    
Active: Data sheet on request only FCLGA;48 pin;50.4 mm²
Outline Drawing:21-0152 (PDF)
Land Pattern: 90-0303 (PDF)
Use pkgcode/variation: L4877F+6*
-40°C to +85°C RoHS/Lead-Free: Lead Free
Materials Analysis
MAX2547BELM+W    
Active: Data sheet on request only FCLGA;48 pin;50.4 mm²
Outline Drawing:21-0152 (PDF)
Land Pattern: 90-0303 (PDF)
Use pkgcode/variation: L4877F+6*
-40°C to +85°C RoHS/Lead-Free: Lead Free
Materials Analysis
MAX2547ELM+  
Active: Data sheet on request only FCLGA;48 pin;50.4 mm²
Outline Drawing:21-0152 (PDF)
Land Pattern: 90-0303 (PDF)
Use pkgcode/variation: L4877F+6*
-40°C to +85°C RoHS/Lead-Free: Lead Free
Materials Analysis
MAX2547ELM+G126    
Active: Data sheet on request only LGA;

Land Pattern: Not Available

-40°C to +85°C See data sheet
Part Number Free
Sample
Buy Status Explanations for product status codes Package:
TYPE PINS FOOTPRINT
DRAWING  CODE/VAR *
Temp RoHS/Lead-Free?
Materials Analysis
MAX2547ELM+GH7    
Active: Data sheet on request only LGA;

Land Pattern: Not Available

-40°C to +85°C See data sheet
MAX2547ELM+T    
Active: Data sheet on request only FCLGA;48 pin;50.4 mm²
Outline Drawing:21-0152 (PDF)
Land Pattern: 90-0303 (PDF)
Use pkgcode/variation: L4877F+6*
-40°C to +85°C RoHS/Lead-Free: Lead Free
Materials Analysis
MAX2547ELM+TG126    
Active: Data sheet on request only FCLGA;48 pin;50.4 mm²
Outline Drawing:21-0152 (PDF)
Land Pattern: 90-0303 (PDF)
Use pkgcode/variation: L4877F+6*
-40°C to +85°C RoHS/Lead-Free: Lead Free
Materials Analysis
MAX2547ELM+TGH7    
Active: Data sheet on request only FCLGA;48 pin;50.4 mm²
Outline Drawing:21-0152 (PDF)
Land Pattern: 90-0303 (PDF)
Use pkgcode/variation: L4877F+6*
-40°C to +85°C RoHS/Lead-Free: Lead Free
Materials Analysis
MAX2547ELM+TW    
Active: Data sheet on request only FCLGA;48 pin;50.4 mm²
Outline Drawing:21-0152 (PDF)
Land Pattern: 90-0303 (PDF)
Use pkgcode/variation: L4877F+6*
-40°C to +85°C RoHS/Lead-Free: Lead Free
Materials Analysis
MAX2547ELM+W    
Active: Data sheet on request only FCLGA;48 pin;50.4 mm²
Outline Drawing:21-0152 (PDF)
Land Pattern: 90-0303 (PDF)
Use pkgcode/variation: L4877F+6*
-40°C to +85°C RoHS/Lead-Free: Lead Free
Materials Analysis
MAX2547EVKIT+    
Active: Data sheet on request only KIT;

Land Pattern: Not Available

See data sheet

Notes:
  1. Other options and links for purchasing parts are listed at: http://www.maxim-ic.com/sales.
  2. Didn't Find What You Need? Ask our applications engineers. Expert assistance in finding parts, usually within one business day.
  3. Part number suffixes: T or T&R = tape and reel; + = RoHS/lead-free; # = RoHS/lead-exempt; -D = drypack; -U/+U on DS parts = cut tape. More: See Full Data Sheet or Maxim Product Naming Conventions.
  4. * Some packages have variations, listed on the drawing. "PkgCode/Variation" tells which variation the product uses. Note that "+", "#", "-" in the part number suffix describes RoHS status. Package drawings may show a different suffix character.

Similar Products by Function

See All Femto RF Receivers (3 Products)

Similar Products by Application

Femto Base Stations for Band 1 HSPA > Direct-Conversion Receiver


Didn't Find What You Need?

Information Index

Document Ref.: 19-1020 Rev 5; 2011-04-21
This page last modified: 2011-04-21


 


Contact Us     |     Privacy Policy     |     Legal Notices
Copyright © 2012 by Maxim Integrated Products