|
MAX3814
DVI/HDMI TMDS FR-4 and Cable Equalizer/Driver
Low-Cost Relief for DVI/HDMI Connection Woes
|
Status
Active: In Production.
Description
The MAX3814 TMDS™ EQ/driver IC compensates for FR-4 and cable losses up to the DVI™/HDMI® transmit connector and provides a fully compliant DVI/HDMI TMDS output. The device can also be used in DVI/HDMI cable applications to extend reach and improve jitter margin of cable channels at the receive-side connector.
The on-chip TMDS drivers operate at a standard current level for implementing a typical DVI/HDMI nonback-terminated transmitter, as well as a 50% higher current mode for using a 200Ω back termination resistor (nonmatching) to achieve a 10dB return loss. Typical DVI/HDMI output drivers contribute to reflection problems between the connector and a typical high-impedance (open) DVI/HDMI Tx output. The selectable output current (LEVEL pin) gives the option of partial back termination (e.g., differentially connected 200Ω) to mitigate the reflection problem effectively while keeping common-mode offset to a minimum.
The 4-channel implementation treats all channels identically. To allow board layout flexibility for DVI and HDMI connectors, which have different channel order, the clock and data channels can be arbitrarily assigned.
The MAX3814 operates from a 3.3V power supply, standard for DVI/HDMI applications, and is packaged in a 5mm x 5mm x 0.1mm, 32-pin TQFP package.
|
|
Data Sheet
|
An evaluation kit is available: MAX3814EVKIT
Key Features
- Equalizes FR-4 Board Microstrip and Cable HF Losses Up to 15dB at 825MHz for Operation at 0.25Gbps to 1.65Gbps
- Compatible with HDMI 1.3
- Less Than 0.2UIP-P Residual Jitter at 1.65Gbps for 0 to 15dB Channel Loss at 825MHz
- Input Terminations: 50Ω (Each Side to VCC) ±10%
- Output of Driver is a Fully DVI/HDMI TMDS-Compatible Cable Driver
- Output Amplitude: 1.05VP-P Differential
- Enable Pin to Select Normal Operation or Power-Down Mode
- LEVEL Pin to Select Output Current for Use With or Without Back Termination
- 32-Pin TQFP for Four Channels; Any Channel Can Be Either a TMDS Data or Clock Signal
- VCC = 3.3V; Signal Pins Have Absolute Max Ratings of 5.5V (for Fault Conditions)
|
|
Applications/Uses
- Cable TMDS Equalizer
- Docking Station TMDS Equalizer and Driver
- Laptop PC TMDS Equalizer and Driver
|
|
|
|
Key Specifications:
| Digital Video Equalizers/Drivers |
| Part Number |
Data Rate
(Mbps) |
Max. Reach @ Max. Data Rate |
VSUPPLY
(V) |
ICC
(mA) |
I/O Type |
Channels |
Rx Eq. @ Max. Rate
(dB) |
EV Kit |
Package/Pins |
Smallest Available Pckg.
(mm2) |
Budgetary Price |
| min |
typ |
typ |
max w/pins |
See Notes |
| MAX3814 |
0 |
|
3.3 |
110 |
CML |
1 |
15 |
Yes |
|
51.8 |
$2.01 @1k |
|
See All Digital Video Equalizers/Drivers (4)
|
Pricing Notes:
This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific prices and delivery, please see the price and availability page or contact an authorized distributor.
|
|
| Equalizers (Cable and Circuit Board) |
| Part Number |
Applications |
Data Rate
(Mbps) |
Max. Reach @ Max. Data Rate |
VSUPPLY
(V) |
I/O Type |
Channels |
Rx Eq. @ Max. Rate
(dB) |
Package/Pins |
Smallest Available Pckg.
(mm2) |
Oper. Temp.
(°C) |
Budgetary Price |
| min |
typ |
max w/pins |
See Notes |
| MAX3814 |
| Copper Cable Interconnect | | HDMI/DVI | | Printed Circuit Board Interconnect |
|
0 |
|
3.3 |
CML |
1 |
15 |
|
51.8 |
0 to +70 |
$2.01 @1k |
|
See All Equalizers (Cable and Circuit Board) (21)
|
Pricing Notes:
This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific prices and delivery, please see the price and availability page or contact an authorized distributor.
|
|
Diagram
Functional Diagram
Application Notes
Product Guides
Reliability Reports
Software/Models
Ordering Information
|
Part Number
|
Free
Sample |
Buy |
Status
|
Package:
TYPE PINS FOOTPRINT
DRAWING CODE/VAR *
|
Temp |
RoHS/Lead-Free?
Materials Analysis
|
| MAX3814CHJ+
|
|
|
Active |
TQFP;32 pin;51.8 mm²
Outline Drawing:21-0110 (PDF)
Land Pattern: 90-0149 (PDF)
Use pkgcode/variation: H32+1*
|
0°C to +70°C
|
RoHS/Lead-Free: Lead Free
Materials Analysis |
| MAX3814CHJ+T
|
|
|
Active |
TQFP;32 pin;51.8 mm²
Outline Drawing:21-0110 (PDF)
Land Pattern: 90-0149 (PDF)
Use pkgcode/variation: H32+1*
|
0°C to +70°C
|
RoHS/Lead-Free: Lead Free
Materials Analysis |
Notes:
- Other options and links for purchasing parts are listed at: http://www.maxim-ic.com/sales.
- Didn't Find What You Need? Ask our applications engineers. Expert assistance in finding parts, usually within one business day.
- Part number suffixes: T or T&R = tape and reel; + = RoHS/lead-free; # = RoHS/lead-exempt; -D = drypack; -U/+U on DS parts = cut tape. More: See Full Data Sheet or Maxim Product Naming Conventions.
- * Some packages have variations, listed on the drawing. "PkgCode/Variation" tells which variation the product uses. Note that "+", "#", "-" in the part number suffix describes RoHS status. Package drawings may show a different suffix character.
|
Similar Products by Function
Similar Products by Application
Evaluation Kits
Products with Similar Part Numbers
More Information
Didn't Find What You Need?
Information Index
Document Ref.: 19-0813
Rev 2;
2010-12-10
This page last modified: 2011-02-15
|
Download
E-Mail