|
|
|
MAX13042E, MAX13043E, MAX13044E, MAX13045E
1.62V to 3.6V Improved High-Speed LLT
High-Speed (100Mbps), 4-Channel Translators
|
Status
| Part Number |
Status |
|
MAX13042E
|
Active: In Production. |
|
MAX13043E
|
Active: In Production. |
|
MAX13044E
|
Future Product |
|
MAX13045E
|
Future Product |
Description
The MAX13042E–MAX13045E 4-channel, bidirectional
level translators provide the level shifting necessary for
100Mbps data transfer in multivoltage systems. The
MAX13042E–MAX13045E are ideally suited for level
translation in systems with four channels. Externally
applied voltages, VCC and VL, set the logic levels on
either side of the device. Logic signals present on the
VL side of the device appear as a high-voltage logic
signal on the VCC side of the device and vice-versa.
The MAX13042E–MAX13045E operate at full speed
with external drivers that source as little as 4mA output
current or larger. Each input/output (I/O) channel is
pulled up to VCC or VL by an internal 30µA current
source, allowing the MAX13042E–MAX13045E to be
driven by either push-pull or open-drain drivers.
The MAX13042E–MAX13045E feature an enable (EN)
input that places the devices into a low-power shutdown
mode when driven low. The MAX13042E–MAX13045E
feature an automatic shutdown mode that disables the
part when VCC is less than VL. The state of I/O VCC_ and I/O VL_ during shutdown is chosen by selecting the appropriate part version. (See the Ordering Information/Selector Guide in the full data sheet).
The MAX13042E–MAX13045E operate with VCC voltages
from +2.2V to +3.6V and VL voltages from +1.62V
to +3.2V, making them ideal for data transfer between
low-voltage ASIC/PLDs and higher voltage systems.
The MAX13042E–MAX13045E are available in 12-bump
UCSP™ (1.54mm x 2.12mm) and 14-pin TDFN (3mm x 3mm) packages, and operate over the extended -40°C to +85°C temperature range.
|
|
Data Sheet
|
An evaluation kit is available: MAX13042EEVKIT
Key Features
- Compatible with 4mA Input Drivers or Larger
- 100Mbps Guaranteed Data Rate
- Four Bidirectional Channels
- Enable Input
- ±15kV ESD Protection on I/O VCC_ Lines
- +1.62V ≤ VL ≤ +3.2V and +2.2V ≤ VCC ≤ +3.6V Supply Voltage Range
- 12-Bump UCSP (1.54mm x 2.12mm) and 14-Pin TDFN (3mm x 3mm) Lead-Free Packages
|
|
Applications/Uses
- Cell Phones
- CMOS Logic-Level Translation
- GPS
- Low-Voltage ASIC Level Translation
- Portable Communication Devices
- Portable POS Systems
- SPI™ and MICROWIRE™ Level Translation
- Telecommunications Equipment
|
|
|
|
Key Specifications:
| Logic Level Translators |
| Part Number |
Level Transl. |
VL
(V) |
VCC
(V) |
Data Rate
(Mbps) |
I/O VCC State |
I/O VL State |
ICC
(µA) |
VL
(µA) |
ICC (Shutdn.)
(µA) |
IL (Shutdn.)
(µA) |
Budgetary Price |
| max |
Shutdn. |
Shutdn. |
max |
max |
max |
max |
See Notes |
| MAX13042E |
4 |
1.62 to 3.2 |
2.2 to 3.6 |
100 |
High Impedance |
High Impedance |
25 |
10 |
1 |
1 |
$1.19 @1k |
| MAX13043E |
16.5kΩ to GND |
$1.62 @1k |
|
See All Logic Level Translators (60)
|
Pricing Notes:
This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific prices and delivery, please see the price and availability page or contact an authorized distributor.
|
|
Diagram
Typical Operating Circuit
Product Guides
Reliability Reports
| Reliability Report: |
MAX13042E.pdf |
| Show FIT data for: |
|
| Request Reliability Report for: |
|
Software/Models
Ordering Information
|
Part Number
|
Free
Sample |
Buy |
Status
|
Package:
TYPE PINS FOOTPRINT
DRAWING CODE/VAR *
|
Temp |
RoHS/Lead-Free?
Materials Analysis
|
| MAX13042EEBC+T
|
|
|
Active |
UCSP;12 pin;3.3 mm²
Outline Drawing:21-0104 (PDF)
Land Pattern: Not Available
Use pkgcode/variation: B12+3*
|
-40°C to +85°C
|
RoHS/Lead-Free: Lead Free
Materials Analysis |
| MAX13042EETD+
|
|
|
Active |
TDFN-EP;14 pin;9.6 mm²
Outline Drawing:21-0137 (PDF)
Land Pattern: 90-0063 (PDF)
Use pkgcode/variation: T1433+2*
|
-40°C to +85°C
|
RoHS/Lead-Free: Lead Free
Materials Analysis |
| MAX13042EETD+T
|
|
|
Active |
TDFN-EP;14 pin;9.6 mm²
Outline Drawing:21-0137 (PDF)
Land Pattern: 90-0063 (PDF)
Use pkgcode/variation: T1433+2*
|
-40°C to +85°C
|
RoHS/Lead-Free: Lead Free
Materials Analysis |
| MAX13043EEBC+T
|
|
|
Active |
UCSP;12 pin;3.3 mm²
Outline Drawing:21-0104 (PDF)
Land Pattern: Not Available
Use pkgcode/variation: B12+3*
|
-40°C to +85°C
|
RoHS/Lead-Free: Lead Free
Materials Analysis |
| MAX13043EETD+T
|
|
|
Active |
TDFN-EP;14 pin;9.6 mm²
Outline Drawing:21-0137 (PDF)
Land Pattern: 90-0063 (PDF)
Use pkgcode/variation: T1433+2*
|
-40°C to +85°C
|
RoHS/Lead-Free: Lead Free
Materials Analysis |
Notes:
- Other options and links for purchasing parts are listed at: http://www.maxim-ic.com/sales.
- Didn't Find What You Need? Ask our applications engineers. Expert assistance in finding parts, usually within one business day.
- Part number suffixes: T or T&R = tape and reel; + = RoHS/lead-free; # = RoHS/lead-exempt; -D = drypack; -U/+U on DS parts = cut tape. More: See Full Data Sheet or Maxim Product Naming Conventions.
- * Some packages have variations, listed on the drawing. "PkgCode/Variation" tells which variation the product uses. Note that "+", "#", "-" in the part number suffix describes RoHS status. Package drawings may show a different suffix character.
|
Similar Products by Function
Similar Products by Application
Evaluation Kits
Products with Similar Part Numbers
More Information
Didn't Find What You Need?
Information Index
Document Ref.: 19-0792
Rev 0;
2007-05-15
This page last modified: 2011-02-16
|
|
|
Download
E-Mail