Status
Active: In Production.
Description
The MAX2204 RF power detector is designed to operate
from 450MHz to 2.5GHz. The device is ideal for
wideband code-division multiple access (WCDMA),
cdma2000®, and high-speed downlink/uplink packet
access. The MAX2204 accepts an RF signal at the
input, and outputs a highly repeatable voltage. The output
voltage increases monotonically with increasing
input power. The device is designed to compensate for
temperature and process shifts, reducing the typical
output variation to less than ±0.5dB at full input power
and ±1.5dB at the lower power.
The MAX2204 features a detection range from -16dBm
to +5dBm. High input impedance allows for low-loss
resistive tap if an isolator is used. The device uses
external termination at the input so that the RF signal
from several directional couplers can be connected to
a single detector chip.
The MAX2204 operates from a 2.7V to 3.3V power
supply. The device is available in a tiny 5-pin SC70 package.
Electrical performance is guaranteed over a -40°C to
+85°C temperature range.
|
|
Data Sheet
|
Download
E-Mail