6-Channel High-Speed Logic-Level Translators

Part Number	Status	Replacement
MAX13030E	Active: In Production.
MAX13031E	This product is No Longer Available.	MAX13030E
MAX13032E	Active: In Production.
MAX13033E	Future Product
MAX13034E	Future Product
MAX13035E	Active: In Production.

The MAX13030E–MAX13035E 6-channel, bidirectional level translators provide the level shifting necessary for 100Mbps data transfer in multivoltage systems. The MAX13030E–MAX13035E are ideally suited for memory-card level translation, as well as generic level translation in systems with six channels. Externally applied voltages, V_CC and V_L, set the logic levels on either side of the device. Logic signals present on the V_L side of the device appear as a higher voltage logic signal on the V_CC side of the device and vice versa. The MAX13035E features a CLK_RET output that returns the same clock signal applied to the CLK_V_L input.

The MAX13030E–MAX13035E operate at full speed with external drivers that source as little as 4mA output current. Each I/O channel is pulled up to V_CC or V_L by an internal 30μA current source, allowing the MAX13030E–MAX13035E to be driven by either push-pull or open-drain drivers.

The MAX13030E–MAX13034E feature an enable (EN) input that places the device into a low-power shutdown mode when driven low. The MAX13030E–MAX13035E features an automatic shutdown mode that disables the part when V_CC is less than V_L. The state of I/O V_CC_ and I/O V_L_ during shutdown is chosen by selecting the appropriate part version (see Ordering Information/Selector Guide located within the full datasheet).

The MAX13030E–MAX13035E accept V_CC voltages from +2.2V to +3.6V and V_L voltages from +1.62V to +3.2V, making them ideal for data transfer between low-voltage ASIC/PLDs and higher voltage systems. The MAX13030E–MAX13035E are available in 16-bump UCSP (2mm x 2mm) and 16-pin TQFN (4mm x 4mm) packages, and operate over the extended -40°C to +85°C temperature range.

Download Rev 0 (PDF, 336kB) E-Mail