MAX8785A

Full-Bridge CCFL Controller for Piezoelectric Transformers

Full-Bridge CCFL Controller for Piezoelectric Transformer-Based Backlight Power Supplies

 Overview   Technical Documents   Ordering Info   Related Products   User Comments (0)   All   


Status Explanations for product status codes

Active: In Production.

Description

Liquid-crystal display (LCD) enclosures and cold-cathode fluorescent lamps (CCFL) used in notebook computer and portable electronic displays are becoming increasingly narrow, generating the need for a low-profile CCFL power supply. Recent advances in piezoelectric transformers (PZT) have made it possible to develop smaller, more efficient, and safer backlight inverters for portable displays. Piezoelectric transformers have shown better performance than magnetic transformers with respect to efficiency EMI requirements, human safety, and form factor.

The MAX8785A is a full-bridge CCFL controller for piezoelectric transformer-based backlight power supplies. The full-bridge topology provides a high-spectral purity sinusoidal drive that helps the PZT convert electrical energy to mechanical and back to electrical energy efficiently.

The MAX8785A employs a feed-forward control architecture that provides excellent line and load regulation while maintaining relatively constant switching frequency. The MAX8785A provides protection against open-lamp, secondary short-circuit, lamp arcing, and secondary overvoltage with adjustable timeout periods.

The MAX8785A guarantees lamp striking by sweeping the switching frequency from high to low until the lamp is struck. The MAX8785A achieves 10:1 dimming range using a digital pulse-width modulation (DPWM) method. CCFL brightness can be set with an analog voltage on the CNTL pin or through an external signal at LSYNC. If the controller loses the external signal, it switches over to the internal oscillator and keeps operating. The maximum switching frequency and DPWM frequency can be adjusted with external resistors.

The MAX8785A gate drivers can drive large power MOSFETs typically used in high-power CCFL applications. An internal 5.35V linear regulator powers the MOSFET drivers and most of the internal circuitry. The MAX8785A is available in a low-profile, 28-pin thin QFN package and operates over the -40°C to +85°C temperature range.
 

Data Sheet

Download this datasheet in PDF formatDownload Rev 1 (PDF, 308kB)
Send this datasheet to any email addressE-Mail

My Maxim: Not Logged In
By logging in to My Maxim you can subscribe to alerts for this data sheet.

Login | Register
An evaluation kit is available: MAX8785AEVKIT

Key Features

  • Resonant, All n-Channel, Full-Bridge Topology
  • Wide Input Voltage Range (4.5V to 28V)
  • Frequency Sweeping Guarantees CCFL Striking
  • Feed-Forward Control Provides Excellent Line Transient Response
  • Programmable Maximum Switching Frequency
  • Analog or Digital DPWM
  • Lamp-Out Detection with Adjustable Timeout
  • Fault Protection with Adjustable Timeout
  • Primary Current Limit with RDS(ON) Sensing
  • Strong Gate Drivers Support Large External MOSFETs
  • 28-Pin Thin QFN Package
 

Applications/Uses

  • LCD TVs and Monitors
  • Notebook LCDs
   

Diagram

MAX8785A: Simplified Operating Circuit
Simplified Operating Circuit

Didn't Find What You Need?

Information Index

Document Ref.: 19-0600 Rev 1; 2008-05-30
This page last modified: 2009-09-04




Contact Us     |     Privacy Policy     |     Legal Notices     |     Distributor Portal
Copyright © 2012 by Maxim Integrated Products