Status
All versions are Not Recommended for New Designs. See Ordering Information for recommended replacements.
Description
The MAX4397DA/SA dual SCART switch matrices route
audio and video signals between an MPEG encoder
and two external SCART connectors under I²C control,
and meets the requirements of EN50049-1, IEC 933-1,
Canal+, and BSkyB standards.
The video and audio channels feature input source selection
multiplexers, input buffers, and output buffers for routing
all inputs to selected outputs. The MAX4397DA audio
encoder input is differential DC-coupled, while the
MAX4397SA audio encoder input is single-ended AC-coupled.
Except for the MAX4397DA's audio encoder input,
all other inputs and outputs are AC-coupled with internal
DC-biasing set to predefined levels.
The MAX4397DA/SA provide programmable gain control
from +5dB to +7dB in 1dB steps for Red, Green, and
Blue component video signals. All other video outputs
have a fixed +6dB gain. Additional features include an
internal Luma and Chroma (Y/C) mixer that generates a
Composite video signal (CVBS) to supply an RF
modulator output and internal video reconstruction low-pass
filters with passband ripple between -1dB and
+1dB from 100kHz to 5.5MHz. The MAX4397DA/SA TV
audio channel feature clickless switching and programmable
volume control from -56dB to +6dB in 2dB steps.
The VCR audio output also has programmable gain for
-6dB, 0dB, or +6dB. The device also generates
monaural audio from left and right stereo inputs.
All audio drivers deliver a 3.0VRMS minimum output.
The MAX4397DA/SA operate with standard 5V and 12V
power supplies and support slow-switching and fast-switching
signals. The I²C interface programs the gain
and volume control, and selects the input source
for routing.
The MAX4397DA/SA are available in a compact 48-pin
thin QFN package and are specified over the 0°C to
+70°C commercial temperature range.
|
|
Data Sheet
|
Download
E-Mail