Maxim > Products > Analog Switches and Multiplexers > MAX4744, MAX4744H, MAX4745, ...

MAX4744, MAX4744H, MAX4745, MAX4745H, MAX4746H

Low-Voltage, Dual SPDT, Audio Clickless Switches with Negative Rail Capability

Negative Signal Handling and Audio Clickless/Popless Features in a Small, 10-Pin µDFN Package (2mm x 2mm)

 Overview   Technical Documents   Ordering Info   Related Products   User Comments (0)   All   


Status Explanations for product status codes

Active: In Production.

Description

The MAX4744/MAX4744H/MAX4745/MAX4745H/MAX4746H dual SPDT (single-pole/double-throw) audio switches feature negative signal capability that allows signals as low as VCC - 5.5V to pass through without distortion. These analog switches have a low on-resistance and low supply current, and operate from a single +1.8V to +5.5V supply.

The MAX4744/MAX4744H have internal shunt resistors that automatically discharge the capacitance at the normally open (NO) and normally closed (NC) terminals when they are not connected. The MAX4746H features internal shunt resistors on NC_ terminals. This reduces click-and-pop sounds that occur when switching audio signals between precharged points. A break-before-make feature further reduces popping. The MAX4744/MAX4745 control the switches with two control bits CB1 and CB2. The MAX4744H/MAX4745H/MAX4746H have one control bit to switch both switches and an enable input active-low EN to put the switches in a high-impedance mode. The MAX4744H/MAX4745H/MAX4746H also have an internal protection network against voltages applied to COM_ when VCC = 0V.

These devices are available in a space-saving 10-pin µDFN (2mm x 2mm) package and operate over the -40°C to +85°C extended temperature range.

 

Data Sheet

Download this datasheet in PDF formatDownload Rev 1 (PDF, 215.7kB)
Send this datasheet to any email addressE-Mail

Key Features

  • Distortion-Free Negative Signal Throughput Down to VCC - 5.5V
  • Internal Shunt Resistor Reduces Click/Pop (MAX4744/MAX4744H)
  • 0.6Ω (typ) Low On-Resistance
  • 0.1Ω (max) Channel-to-Channel Matching
  • 0.55Ω (max) On-Resistance Flatness
  • +1.8V to +5.5V Single-Supply Voltage
  • 0.01% (typ) Total Harmonic Distortion
  • -75dB (typ) Crosstalk (100kHz)
  • -68dB (typ) Off-Isolation (100kHz)
  • Available in 10-Pin µDFN Package (2mm x 2mm)
 

Applications/Uses

  • Cellular Phones
  • MP3 Players
  • Notebook Computers
  • PDAs and Other Handheld Devices
  • Power Routing
  • Speaker Switching
   

Key Specifications:

Switches and Multiplexers (Low Voltage)
Part Number Config. Channels VSUPPLY (Single)
(V)
VSUPPLY (Single)
(V)
VSIGNAL
(V)
VSIGNAL
(V)
Dynamic Range (max)
(V)
RON
(Ω)
RFLAT(ON) BW
(MHz)
tON
(ns)
tOFF
(ns)
QINJECTION
(pC)
CON
(pF)
COFF
(pF)
Budgetary Price
min max min max max max typ min max max max See Notes
MAX4744  SPDT 2 1.8 5.5 -3.7 5.5 5.5 0.95 0.55 25 560 540 550 300 90 $1.55 @1k
MAX4744H  DPDT 1 -3.7 5.5 5.5 0.55 $1.55 @1k
MAX4745  SPDT 2 -3.7 5.5 5.5 0.55 $1.55 @1k
MAX4745H  DPDT 1 -3.7 5.5 5.5 0.55 $1.55 @1k
MAX4746H  DPDT 1 - - - - $1.55 @1k
See All Switches and Multiplexers (Low Voltage) (186)
Pricing Notes:
This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific prices and delivery, please see the price and availability page or contact an authorized distributor.


Diagram

MAX4744, MAX4744H, MAX4745, MAX4745H, MAX4746H: Typical Operating Circuit
Typical Operating Circuit

Product Guides

Signal Routing & Protection (PDF)

Reliability Reports

Reliability Report: MAX4744.pdf
Show FIT data for:
Request Reliability Report for:

Software/Models

none

Ordering Information

Filters: Part Number: Package: Temperature: Tape and Reel Sample
Part Number Free
Sample
Buy Status Explanations for product status codes Package:
TYPE PINS FOOTPRINT
DRAWING  CODE/VAR *
Temp RoHS/Lead-Free?
Materials Analysis
MAX4744ELB+  
Active µDFN;10 pin;4.2 mm²
Outline Drawing:21-0164 (PDF)
Land Pattern: 90-0006 (PDF)
Use pkgcode/variation: L1022+1*
-40°C to +85°C RoHS/Lead-Free: Lead Free
Materials Analysis
MAX4744ELB+T    
Active µDFN;10 pin;4.2 mm²
Outline Drawing:21-0164 (PDF)
Land Pattern: 90-0006 (PDF)
Use pkgcode/variation: L1022+1*
-40°C to +85°C RoHS/Lead-Free: Lead Free
Materials Analysis
MAX4744HELB+  
Active µDFN;10 pin;4.2 mm²
Outline Drawing:21-0164 (PDF)
Land Pattern: 90-0006 (PDF)
Use pkgcode/variation: L1022+1*
-40°C to +85°C RoHS/Lead-Free: Lead Free
Materials Analysis
MAX4744HELB+T    
Active µDFN;10 pin;4.2 mm²
Outline Drawing:21-0164 (PDF)
Land Pattern: 90-0006 (PDF)
Use pkgcode/variation: L1022+1*
-40°C to +85°C RoHS/Lead-Free: Lead Free
Materials Analysis
MAX4745ELB+  
Active µDFN;10 pin;4.2 mm²
Outline Drawing:21-0164 (PDF)
Land Pattern: 90-0006 (PDF)
Use pkgcode/variation: L1022+1*
-40°C to +85°C RoHS/Lead-Free: Lead Free
Materials Analysis
MAX4745ELB+T    
Active µDFN;10 pin;4.2 mm²
Outline Drawing:21-0164 (PDF)
Land Pattern: 90-0006 (PDF)
Use pkgcode/variation: L1022+1*
-40°C to +85°C RoHS/Lead-Free: Lead Free
Materials Analysis
MAX4745HELB+T    
Active µDFN;10 pin;4.2 mm²
Outline Drawing:21-0164 (PDF)
Land Pattern: 90-0006 (PDF)
Use pkgcode/variation: L1022+1*
-40°C to +85°C RoHS/Lead-Free: Lead Free
Materials Analysis
MAX4746HELB+T    
Active µDFN;10 pin;4.2 mm²
Outline Drawing:21-0164 (PDF)
Land Pattern: 90-0006 (PDF)
Use pkgcode/variation: L1022+1*
-40°C to +85°C RoHS/Lead-Free: Lead Free
Materials Analysis

Notes:
  1. Other options and links for purchasing parts are listed at: http://www.maxim-ic.com/sales.
  2. Didn't Find What You Need? Ask our applications engineers. Expert assistance in finding parts, usually within one business day.
  3. Part number suffixes: T or T&R = tape and reel; + = RoHS/lead-free; # = RoHS/lead-exempt; -D = drypack; -U/+U on DS parts = cut tape. More: See Full Data Sheet or Maxim Product Naming Conventions.
  4. * Some packages have variations, listed on the drawing. "PkgCode/Variation" tells which variation the product uses. Note that "+", "#", "-" in the part number suffix describes RoHS status. Package drawings may show a different suffix character.

Similar Products by Function

MAX4762, MAX4763, MAX4764, ... Low-Voltage, Dual SPDT, Audio Clickless Switches with Negative Rail Capability

More Information

Topmark Coding MAX4744
Topmark Coding MAX4745
Topmark Coding MAX4746H


Didn't Find What You Need?

Information Index

Overview

 

Technical Documents

 

Ordering Info

 

Related Products

 
Description
Key Features
Applications/Uses
Key Specifications
Diagram
Notes and Comments
  Data Sheet
Application Notes
Evaluation Kits
Product Guides
Reliability Reports
Software/Models
  Price and Availability
Samples
Buy Online
Package Information
Lead-Free Information
  Similar Products by Function
Similar Products by Application
Evaluation Kits
Products with Similar Part Numbers
Products Used With This
 
Document Ref.: 19-0563 Rev 1; 2007-02-13
This page last modified: 2011-12-12


 


Contact Us     |     Privacy Policy     |     Legal Notices
Copyright © 2012 by Maxim Integrated Products