Overvoltage-Protection Controllers with Internal FET

Part Number	Status
MAX4943	Active: In Production. See Ordering Information for details.
MAX4944	Active: In Production.
MAX4944L	Active: In Production.
MAX4945	Active: In Production.
MAX4945L	Active: In Production.
MAX4946	Active: In Production.
MAX4949	Active: In Production.

The MAX4943–MAX4946/MAX4949 family of overvoltage-protection devices feature a low 80mΩ (typ) R_ON internal FET and protect low-voltage systems against voltage faults up to +28V. These devices also drive an optional external pFET to protect down to -28V when connected to a load with reverse current protection. When the input voltage exceeds the overvoltage threshold, the internal FET is turned off to prevent damage to the protected components.

All switches feature a minimum 1.2A current-limit protection. During a short-circuit occurrence, the MAX4944B and MAX4945B place the switch in a latchoff state where the switch turns off and remains off. For the autoretry devices, the switch turns off and continuously checks after a 15ms (typ) retry time.

The overvoltage thresholds (OVLO) are preset to 7.4V, 6.35V, 5.8V, 4.56V, or 8.9V. The undervoltage-lockout (UVLO) thresholds are preset to 2.45V and 4.15V. When the input voltage drops below the undervoltagelockout (UVLO) threshold, the devices enter a lowcurrent standby mode. (See the Ordering Information/Selector Guide in the full data sheet for more details on UVLO/OVLO).

All devices are offered in a small, 8-pin µDFN (2mm x 2mm) package and are specified for operation over the -40°C to +85°C temperature range.

Download Rev 3 (PDF, 164kB) E-Mail

My Maxim: Not Logged In By logging in to My Maxim you can subscribe to alerts for this data sheet. Login | Register