MAX3643

155Mbps to 2.5Gbps Burst-Mode Laser Driver

2ns Burst On/Off-Time for Any PON ONT Applications

 Overview   Technical Documents   Ordering Info   Related Products   User Comments (0)   All   


Status Explanations for product status codes

Active: In Production.

Description

The MAX3643 burst-mode laser driver provides bias and modulation current drive for PON burst-mode ONT applications. It is specifically designed for use with a low-cost external controller for the APC (and if desired, AMC) loop. A high-speed differential burst-enable input enables the driver to switch the laser from a dark (output off) condition to full on condition in less than 2ns. When BEN is inactive, typical modulation and bias currents are 5µA each.

Laser modulation current can be set from 10mA to 85mA and bias current can be set from 1mA to 70mA using the MODSET and BIASSET inputs. A sample-and-hold circuit is provided to capture the monitor diode output during short PON bursts, if needed, and the BEN high-speed signal is mirrored on an LVCMOS output to be used by the controller operating the APC/AMC loop.

The MAX3643 burst-mode laser driver is packaged in a 4mm x 4mm, 24-pin thin QFN package. It operates from -40°C to +85°C.
 

Data Sheet

Download this datasheet in PDF formatDownload Rev 2 (PDF, 416kB)
Send this datasheet to any email addressE-Mail
An evaluation kit is available: MAX3643EVKIT

Key Features

  • 10mA to 85mA Modulation Current
  • 1mA to 70mA Bias Current
  • Monitor Diode Sample and Hold
  • 45ps Output Transition Time
  • 2ns Turn-On/Off Time
  • Reference Voltage Generator
  • LVPECL High-Speed Inputs (Data, Burst Enable)
 

Applications/Uses

  • 1.25Gbps IEEE EPON ONT Modules
  • A/B/G/XGPON ONT Modules Up to 2.5Gbps
   

Key Specifications:

Laser Drivers
Part Number Target Oper. Range
(Gbps)
Data Rate
(Mbps)
Data Rate
(Mbps)
VSUPPLY
(V)
ICC
(mA)
I/O Type IMOD
(mA)
IBIAS
(mA)
EV Kit Package/Pins Budgetary Price
min max typ max max See Notes
MAX3643 
1 to 4.5
<1
155 2500 3.3 32
CML
LVPECL
85 70 Yes
TQFN/24
$1.94 @1k
See All Laser Drivers (24)
Pricing Notes:
This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific prices and delivery, please see the price and availability page or contact an authorized distributor.


Diagram

MAX3643: Typical Application Circuit
Typical Application Circuit

Application Notes

Application Note 3887   MAX3643: Using the MAX3643 Laser Driver with a Low-Cost Microcontroller
Application Note 3896   HFTA-14.0 Design Challenges of GPON FEC Receivers
Reference Design 3926   HFRD-22.3: Modular GPON (MOGPON) ONT
Application Note 3927   MAX3643: Generating a TX Power Monitor in Burst Mode Applications (Using MAX3643 and the DS1863 or DS1865)
Reference Design 3933   HFRD-25.1: Ultra Low-Cost GEPON SFF ONT
Reference Design 3985   HFRD-25.2: Low-Cost GEPON SFF ONT with µC
Reference Design 3993   HFRD-26.0: GEPON SFF Host Board
Application Note 4227   HFAN-02.7.0 Reducing Laser Driver Output Noise When No Input Signal Is Applied

Reliability Reports

Reliability Report: MAX3643.pdf
Show FIT data for:

Software/Models

none

Ordering Information

Filters: Part Number: Package: Temperature: Tape and Reel Sample
Part Number Free
Sample
Buy Status Explanations for product status codes Package:
TYPE PINS FOOTPRINT
DRAWING  CODE/VAR *
Temp RoHS/Lead-Free?
Materials Analysis
MAX3643ETG+  
Active TQFN;24 pin;16.8 mm²
Outline Drawing:21-0139 (PDF)
Land Pattern: 90-0021 (PDF)
Use pkgcode/variation: T2444+3*
-40°C to +85°C RoHS/Lead-Free: Lead Free
Materials Analysis
MAX3643ETG+T    
Active TQFN;24 pin;16.8 mm²
Outline Drawing:21-0139 (PDF)
Land Pattern: 90-0021 (PDF)
Use pkgcode/variation: T2444+3*
-40°C to +85°C RoHS/Lead-Free: Lead Free
Materials Analysis

Notes:
  1. Other options and links for purchasing parts are listed at: http://www.maxim-ic.com/sales.
  2. Didn't Find What You Need? Ask our applications engineers. Expert assistance in finding parts, usually within one business day.
  3. Part number suffixes: T or T&R = tape and reel; + = RoHS/lead-free; # = RoHS/lead-exempt; -D = drypack; -U/+U on DS parts = cut tape. More: See Full Data Sheet or Maxim Product Naming Conventions.
  4. * Some packages have variations, listed on the drawing. "PkgCode/Variation" tells which variation the product uses. Note that "+", "#", "-" in the part number suffix describes RoHS status. Package drawings may show a different suffix character.

Similar Products by Function

MAX3656 155Mbps to 2.5Gbps Burst-Mode Laser Driver
See All Laser Drivers (26 Products)

Similar Products by Application

Passive Optical Network (PON) > BM Laser Driver

Evaluation Kits

MAX3643EVKIT Evaluation Kit for the MAX3643

Products with Similar Part Numbers

MAX3643EVKIT Evaluation Kit for the MAX3643


Didn't Find What You Need?

Information Index

Document Ref.: 19-3848 Rev 2; 2010-08-20
This page last modified: 2010-12-08


 


Contact Us     |     Privacy Policy     |     Legal Notices
Copyright © 2012 by Maxim Integrated Products