|
MAX1335
4Msps, 3V, 2-Channel, True-Differential, 10-Bit ADC
|
Status
| Part Number |
Status |
|
MAX1335
|
This product is Not Recommended for New Designs. |
Description
The MAX1335 2-channel, serial-output, 10-bit, analog-to-digital converter (ADC) features two true-differential analog inputs and offers outstanding noise
immunity and dynamic performance. The device easily interfaces with SPI™/QSPI™/MICROWIRE™ and standard digital signal processors (DSPs).
The MAX1335 operates from a single +2.7V to +3.6V supply
with sampling rates up to 4Msps. This device features
a partial power-down mode and a full power-down
mode that reduces the supply current to 3.3mA and
0.2µA, respectively. Also featured is a separate power-supply
input (DVDD) that allows direct interfacing to
+2.7V to +3.6V digital logic. The fast conversion speed,
low power dissipation, excellent AC performance, and
DC accuracy (±0.4 LSB INL) make the MAX1335 ideal for industrial process control, motor
control, and base-station applications.
The MAX1335 is available in a space-saving
(3mm x 3mm), 16-pin, TQFN package and operates
over the extended (-40°C to +85°C) temperature range.
|
|
|
Key Features
- 4Msps Sampling Rate (+3V, MAX1335)
- Separate Logic Supply: +2.7V to +3.6V
- Two True-Differential Analog Input Channels
- Bipolar/Unipolar Selection Input
- Only 40mW (typ) Power Consumption
- Only 2µA (max) Shutdown Current
- High-Speed, SPI-Compatible, 3-Wire Serial Interface
- 2.6MHz Full-Linear Bandwidth
- 61dB SINAD at 525kHz Input Frequency
- No Pipeline Delays
- Space-Saving (3mm x 3mm), 16-Pin TQFN Package
|
|
Applications/Uses
- Base Stations
- Bill Validation
- Data Acquisition
- High-Speed Modems
- Industrial Process Control
- Motor Control
- Optical Sensors
|
|
|
|
Reliability Reports
| Request Reliability Report for: |
|
Software/Models
Ordering Information
This product cannot be purchased through our web site. Contact factory for availability.
Notes:
- Other options and links for purchasing parts are listed at: http://www.maxim-ic.com/sales.
- Didn't Find What You Need? Ask our applications engineers. Expert assistance in finding parts, usually within one business day.
- Part number suffixes: T or T&R = tape and reel; + = RoHS/lead-free; # = RoHS/lead-exempt; -D = drypack; -U/+U on DS parts = cut tape. More: See Full Data Sheet or Maxim Product Naming Conventions.
- * Some packages have variations, listed on the drawing. "PkgCode/Variation" tells which variation the product uses. Note that "+", "#", "-" in the part number suffix describes RoHS status. Package drawings may show a different suffix character.
|
Similar Products by Function
| MAX1333 |
2Msps, 3V, 2-Channel, True-Differential 12-Bit ADC |
| MAX1337 |
5.5Msps, 2-Channel, 3V, True-Differential, 8-Bit ADC |
More Information
Didn't Find What You Need?
Information Index
Document Ref.: 19-3767
Rev 2;
2007-02-20
This page last modified: 2008-03-28
|
