|
MAX2031
High-Linearity, 650MHz to 1000MHz Upconversion/Downconversion Mixer with LO Buffer/Switch
|
Status
Active: In Production.
Description
The MAX2031 high-linearity passive upconverter or downconverter mixer is designed to provide +36dBm IIP3, 7dB NF, and 7dB conversion loss for a 650MHz to 1000MHz RF frequency range to support GSM/cellular base-station transmitter or receiver applications. With a 650MHz to 1250MHz LO frequency range, this particular mixer is ideal for high-side LO injection architectures. For a pin-to-pin-compatible mixer meant for low-side LO injection, refer to the MAX2029.
In addition to offering excellent linearity and noise performance, the MAX2031 also yields a high level of component integration. This device includes a double-balanced passive mixer core, a dual-input LO selectable switch, and an LO buffer. On-chip baluns are also integrated to allow for a single-ended RF input for downconversion (or RF output for upconversion), and single-ended LO inputs. The MAX2031 requires a nominal LO drive of 0dBm, and supply current is guaranteed to be below 100mA.
The MAX2031 is pin compatible with the MAX2039/MAX2041 1700MHz to 2200MHz mixers, making this family of passive upconverters and downconverters ideal for applications where a common PC board layout is used for both frequency bands.
The MAX2031 is available in a compact 20-pin thin QFN package (5mm x 5mm) with an exposed pad. Electrical performance is guaranteed over the extended -40°C to +85°C temperature range.
|
|
Data Sheet
|
An evaluation kit is available: MAX2031EVKIT
Key Features
- 650MHz to 1000MHz RF Frequency Range
- 650MHz to 1250MHz LO Frequency Range
- 570MHz to 900MHz LO Frequency Range (Refer to the MAX2029 Data Sheet)
- DC to 250MHz IF Frequency Range
- 7dB Conversion Loss
- +36dBm Input IP3
- +27dBm Input 1dB Compression Point
- 7dB Noise Figure
- Integrated LO Buffer
- Integrated RF and LO Baluns
- Low -3dBm to +3dBm LO Drive
- Built-In SPDT LO Switch with 49dB LO1 to LO2 Isolation and 50ns Switching Time
- Pin Compatible with the MAX2039/MAX2041 1700MHz to 2200MHz Mixers
- External Current-Setting Resistor Provides Option for Operating Mixer in Reduced-Power/Reduced-Performance Mode
|
|
Applications/Uses
- Communication Systems
- Digital and Spread-Spectrum
- GSM 850/GSM 900 2G and 2.5G EDGE Base Stations
- Integrated Digital Enhanced Network (iDEN®) Base Stations
- Microwave and Fixed Broadband Wireless Access
- Predistortion Receivers
- WCDMA/LTE and cdma2000® Base Stations
- WiMAX™ Base Stations and Customer Premise Equipment
- Wireless Local Loop
|
|
|
|
Key Specifications:
| Downconverter Mixers |
| Part Number |
Channels |
RF Freq.
(MHz) |
RF Freq.
(MHz) |
LO Freq.
(MHz) |
LO Freq.
(MHz) |
IF Freq.
(MHz) |
IF Freq.
(MHz) |
Gain
(dB) |
Input IP3
(dBm) |
Noise Figure
(dB) |
2RF-2LO/ 2LO-2RF
(dBc) |
VCC
(V) |
5V Supply Current
(mA) |
Footprint
(mm x mm) |
Package/Pins |
Budgetary Price |
| min |
max |
min |
max |
min |
max |
See Notes |
| MAX2031 |
1 |
815 |
1000 |
650 |
1250 |
0 |
250 |
-7 |
36 |
7 |
72 |
4.75 to 5.25 |
85 |
5.0 x 5.0 |
|
$5.97 @1k |
|
See All Downconverter Mixers (44)
|
Pricing Notes:
This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific prices and delivery, please see the price and availability page or contact an authorized distributor.
|
|
| Upconverter Mixers |
| Part Number |
Channels |
RF Freq.
(MHz) |
RF Freq.
(MHz) |
LO Freq.
(MHz) |
LO Freq.
(MHz) |
IF Freq.
(MHz) |
IF Freq.
(MHz) |
Gain
(dB) |
Input IP3
(dBm) |
LO +/-2IF
(dBc) |
LO +/-3IF
(dBc) |
LO Leakage at RF
(dBm) |
Output Noise Floor
(dBm/Hz) |
5V Supply Current
(mA) |
Footprint
(mm x mm) |
Package/Pins |
Budgetary Price |
| min |
max |
min |
max |
min |
max |
See Notes |
| MAX2031 |
1 |
815 |
1000 |
650 |
1250 |
0 |
250 |
-7.4 |
36 |
64 |
83 |
-25.5 |
-167 |
85 |
5.0 x 5.0 |
|
$5.97 @1k |
|
See All Upconverter Mixers (20)
|
Pricing Notes:
This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific prices and delivery, please see the price and availability page or contact an authorized distributor.
|
|
Diagram
Typical Application Circuit
Application Notes
Reliability Reports
Software/Models
Ordering Information
|
Part Number
|
Free
Sample |
Buy |
Status
|
Package:
TYPE PINS FOOTPRINT
DRAWING CODE/VAR *
|
Temp |
RoHS/Lead-Free?
Materials Analysis
|
| MAX2031ETP+
|
|
|
Active |
TQFN;20 pin;26 mm²
Outline Drawing:21-0140 (PDF)
Land Pattern: 90-0008 (PDF)
Use pkgcode/variation: T2055+3*
|
-40°C to +85°C
|
RoHS/Lead-Free: Lead Free
Materials Analysis |
| MAX2031ETP+T
|
|
|
Active |
TQFN;20 pin;26 mm²
Outline Drawing:21-0140 (PDF)
Land Pattern: 90-0008 (PDF)
Use pkgcode/variation: T2055+3*
|
-40°C to +85°C
|
RoHS/Lead-Free: Lead Free
Materials Analysis |
Notes:
- Other options and links for purchasing parts are listed at: http://www.maxim-ic.com/sales.
- Didn't Find What You Need? Ask our applications engineers. Expert assistance in finding parts, usually within one business day.
- Part number suffixes: T or T&R = tape and reel; + = RoHS/lead-free; # = RoHS/lead-exempt; -D = drypack; -U/+U on DS parts = cut tape. More: See Full Data Sheet or Maxim Product Naming Conventions.
- * Some packages have variations, listed on the drawing. "PkgCode/Variation" tells which variation the product uses. Note that "+", "#", "-" in the part number suffix describes RoHS status. Package drawings may show a different suffix character.
|
Similar Products by Function
| MAX9987, MAX9988 |
+14dBm to +20dBm LO Buffers/Splitters with ±1dB Variation |
| MAX9989, MAX9990 |
+14dBm to +20dBm LO Buffers with ±1dB Variation |
| MAX9982 |
825MHz to 915MHz, SiGe High-Linearity Active Mixer |
| MAX9981 |
825MHz to 915MHz, Dual SiGe High-Linearity Active Mixer |
| MAX9993 |
High-Linearity 1700MHz to 2200MHz Down-Conversion Mixer with LO Buffer/Switch |
| MAX9995 |
Dual, SiGe, High-Linearity, 1700MHz to 2700MHz Downconversion Mixer with LO Buffer/Switch |
| MAX9994 |
SiGe High-Linearity, 1400MHz to 2200MHz Downconversion Mixer with LO Buffer/Switch |
| MAX2039 |
High-Linearity, 1700MHz to 2200MHz Upconversion/Downconversion Mixer with LO Buffer/Switch |
| MAX9996 |
SiGe High-Linearity, 1700MHz to 2200MHz Downconversion Mixer with LO Buffer/Switch |
| MAX2022 |
High-Dynamic-Range, Direct Upconversion 1500MHz to 2500MHz Quadrature Modulator |
| MAX9986 |
SiGe High-Linearity, 815MHz to 995MHz Downconversion Mixer with LO Buffer/Switch |
| MAX9984 |
SiGe High-Linearity, 400MHz to 1000MHz Downconversion Mixer with LO Buffer/Switch |
|
|
Evaluation Kits
Products with Similar Part Numbers
More Information
Didn't Find What You Need?
Information Index
Document Ref.: 19-0248
Rev 1;
2009-06-25
This page last modified: 2009-11-09
|
Download
E-Mail