MAX3420E

USB Peripheral Controller with SPI Interface

Add USB Functionality with a Single IC

 Overview   Technical Documents   Ordering Info   Related Products   User Comments (2)   All   


Status Explanations for product status codes

Active: In Production.

Description

The MAX3420E contains the digital logic and analog circuitry necessary to implement a full-speed USB peripheral compliant to USB specification rev 2.0. A built-in full-speed transceiver features ±15kV ESD protection and programmable USB connect and disconnect. An internal serial-interface engine (SIE) handles low-level USB protocol details such as error checking and bus retries. The MAX3420E operates using a register set accessed by an SPI™ interface that operates up to 26MHz. Any SPI master (microprocessor, ASIC, DSP, etc.) can add USB functionality using the simple 3- or 4-wire SPI interface.

Internal level translators allow the SPI interface to run at a system voltage between 1.71V and 3.6V. USB timed operations are done inside the MAX3420E with interrupts provided at completion so an SPI master does not need timers to meet USB timing requirements. The MAX3420E includes four general-purpose inputs and outputs so any microprocessor that uses I/O pins to implement the SPI interface can reclaim the I/O pins and gain additional ones.

The MAX3420E operates over the extended -40°C to +85°C temperature range and is available in a 32-pin LQFP package (7mm x 7mm) and a space-saving 24-pin TQFN package (4mm x 4mm).
 

Data Sheet

Download this datasheet in PDF formatDownload Rev 3 (PDF, 280kB)
Send this datasheet to any email addressE-Mail

Errata MAX3420E MAX3420E_REV0.pdf
An evaluation kit is available: MAX3420EEVKIT-2

Key Features

  • Microprocessor-Independent USB Solution
  • Complies with USB Specification Revision 2.0 (Full-Speed Operation)
  • Integrated Full-Speed USB Transceiver
  • Firmware/Hardware Control of an Internal D+ Pullup Resistor
  • Programmable 3- or 4-Wire 26MHz SPI Interface
  • Level Translators and VL Input Allow Independent System Interface Voltage
  • Internal Comparator Detects VBUS for Self-Powered Applications
  • ESD Protection on D+, D-, and VBCOMP
  • Interrupt Output Pin (Level or Programmable Edge) Allows Polled or Interrupt-Driven SPI Interface
  • Intelligent USB Serial-Interface Engine (SIE)
    • Automatically Handles USB Flow Control and Double Buffering
    • Handles Low-Level USB Signaling Details
    • Contains Timers for USB Time-Sensitive Operations So SPI Master Does Not Need to Time Events
  • Built-In Endpoint FIFOs
    • EP0: CONTROL (64 Bytes)
    • EP1: OUT, Bulk or Interrupt, 2 x 64 Bytes (Double-Buffered)
    • EP2: IN, Bulk or Interrupt, 2 x 64 Bytes (Double-Buffered)
    • EP3: IN, Bulk or Interrupt (64 Bytes)
  • Double-Buffered Data Endpoints Increase Throughput by Allowing the SPI Master to Transfer Data Concurrently with USB Transfers Over the Same Endpoint
  • SETUP Data Has Its Own 8-Byte FIFO, Simplifying Firmware
  • Four General-Purpose Inputs and Four General-Purpose Outputs
  • Space-Saving LQFP and TQFN Packages
 

Applications/Uses

  • Cameras
  • Cell Phones
  • Custom USB Devices
  • Desktop Routers
  • Instrumentation
  • Microprocessors and DSPs
  • MP3 Players
  • PC Peripherals
  • PDAs
  • PLCs
  • Set-Top Boxes
   

Key Specifications:

USB Controllers
Part Number VSUPPLY
(V)
ISUPPLY
(mA)
Peripheral Speed
(Mbps)
SPI Clock
(MHz)
VL
(V)
Package/Pins Smallest Available Pckg.
(mm2)
Oper. Temp.
(°C)
Budgetary Price
max max w/pins See Notes
MAX3420E  3.3 30 12 0 to 26 1.4 to 3.6
LQFP/32
TQFN/24
82.8 -40 to +85 $3.50 @1k
See All USB Controllers (2)
Pricing Notes:
This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific prices and delivery, please see the price and availability page or contact an authorized distributor.


Diagram

MAX3420E: Typical Application Circuit
Typical Application Circuit

Application Notes

Application Note 3592   MAX3420E Information Card
Application Note 3597   Frequently Asked Questions About the MAX3420E
Application Note 3598   MAX3420E Programming Guide
Application Note 3637   Add USB to Anything
Application Note 3661   The MAX3420E Interrupt System
Application Note 3663   Bringing Up a MAX3420E System
Application Note 3690   USB enumeration code (and more) for the MAX3420E
Application Note 3803   Practical USB Terminology
Application Note 3891   Isolating USB
Application Note 3936   The Maxim USB Laboratory
Application Note 3937   Setting Up the Maxim USB Laboratory

Reliability Reports

Reliability Report: MAX3420E.pdf
Show FIT data for:

Software/Models

none

Ordering Information

Filters: Part Number: Package: Temperature: Tape and Reel Sample
Part Number Free
Sample
Buy Status Explanations for product status codes Package:
TYPE PINS FOOTPRINT
DRAWING  CODE/VAR *
Temp RoHS/Lead-Free?
Materials Analysis
MAX3420EECJ    
Active LQFP;32 pin;82.8 mm²
Outline Drawing:21-0054 (PDF)
Land Pattern: 90-0111 (PDF)
Use pkgcode/variation: C32-1*
-40°C to +85°C See data sheet
MAX3420EECJ+  
Active LQFP;32 pin;82.8 mm²
Outline Drawing:21-0054 (PDF)
Land Pattern: 90-0111 (PDF)
Use pkgcode/variation: C32+1*
-40°C to +85°C RoHS/Lead-Free: Lead Free
Materials Analysis
MAX3420EECJ+T    
Active LQFP;32 pin;82.8 mm²
Outline Drawing:21-0054 (PDF)
Land Pattern: 90-0111 (PDF)
Use pkgcode/variation: C32+1*
-40°C to +85°C RoHS/Lead-Free: Lead Free
Materials Analysis
MAX3420EECJ-T    
Active LQFP;32 pin

Land Pattern: Not Available

-40°C to +85°C See data sheet
MAX3420EETG    
Active TQFN;24 pin;16.8 mm²
Outline Drawing:21-0139 (PDF)
Land Pattern: 90-0022 (PDF)
Use pkgcode/variation: T2444-4*
-40°C to +85°C RoHS/Lead-Free: No
Materials Analysis
MAX3420EETG+  
Active TQFN;24 pin;16.8 mm²
Outline Drawing:21-0139 (PDF)
Land Pattern: 90-0022 (PDF)
Use pkgcode/variation: T2444+4*
-40°C to +85°C RoHS/Lead-Free: Lead Free
Materials Analysis
MAX3420EETG+T    
Active TQFN;24 pin;16.8 mm²
Outline Drawing:21-0139 (PDF)
Land Pattern: 90-0022 (PDF)
Use pkgcode/variation: T2444+4*
-40°C to +85°C RoHS/Lead-Free: Lead Free
Materials Analysis
MAX3420EETG-T    
Active QFN;24 pin

Land Pattern: Not Available

-40°C to +85°C See data sheet

Notes:
  1. Other options and links for purchasing parts are listed at: http://www.maxim-ic.com/sales.
  2. Didn't Find What You Need? Ask our applications engineers. Expert assistance in finding parts, usually within one business day.
  3. Part number suffixes: T or T&R = tape and reel; + = RoHS/lead-free; # = RoHS/lead-exempt; -D = drypack; -U/+U on DS parts = cut tape. More: See Full Data Sheet or Maxim Product Naming Conventions.
  4. * Some packages have variations, listed on the drawing. "PkgCode/Variation" tells which variation the product uses. Note that "+", "#", "-" in the part number suffix describes RoHS status. Package drawings may show a different suffix character.

Similar Products by Function

See All USB Controllers (2 Products)

Similar Products by Application

Automatic Teller Machine (ATM) Systems > USB
PIN Pads and Kiosks > USB
USB > USB Controller

Evaluation Kits

MAX3420EEVKIT-2 Evaluation Kit for the MAX3420E

Products with Similar Part Numbers

MAX3420EEVKIT-2 Evaluation Kit for the MAX3420E

More Information

New Product Press Release 2005-09-26 ]


Didn't Find What You Need?

Information Index

Document Ref.: 19-3781 Rev 3; 2011-01-17
This page last modified: 2011-01-17


 


Contact Us     |     Privacy Policy     |     Legal Notices
Copyright © 2012 by Maxim Integrated Products