|
DS26303
3.3V, E1/T1/J1, Short-Haul, Octal Line Interface Unit
|
Status
Active: In Production.
Description
The DS26303 is an 8-channel short-haul line interface unit (LIU) that supports E1/T1/J1 from a single 3.3V power supply. A wide variety of applications are supported through internal termination or external termination. A single bill of material can support E1/T1/J1 with minimum external components. Redundancy is supported through nonintrusive monitoring, optimal high-impedance modes, and configurable 1:1 or 1+1 backup enhancements. An on-chip synthesizer generates the E1/T1/J1 clock rates by a single master clock input of various frequencies. Two clock output references are also offered.
|
|
Data Sheet
Errata DS26303 26303A1.pdfErrata DS26303 26303A2.pdfErrata DS26303 26303A3.pdf
|
An evaluation kit is available: DS26303DK
Key Features
- 8 Complete E1, T1, or J1 Short-Haul Line Interface Units
- Independent E1, T1, or J1 Selections
- Internal Software-Selectable Transmit and Receive-Side Termination
- Crystal-Less Jitter Attenuator
- Selectable Single-Rail and Dual-Rail Mode and AMI or HDB3/B8ZS Line Encoding and Decoding
- Detection and Generation of AIS
- Digital/Analog Loss-of-Signal Detection as per T1.231, G.775, and ETS 300 233
- External Master Clock can be Multiple of 2.048MHz or 1.544MHz for T1/J1 or E1 Operation; This Clock will be Internally Adapted for T1 or E1 Use
- Built-In BERT Tester for Diagnostics
- 8-Bit Parallel Interface Support for Intel or Motorola Mode or a 4-Wire Serial Interface
- Hardware Mode Interface Support
- Transmit Short-Circuit Protection
- G.772 Nonintrusive Monitoring
- Specification Compliance to the Latest T1 and E1 Standards—ANSI T1.102, AT&T Pub 62411, T1.231, T1.403, ITU-T G.703, G.742, G.775, G.823, ETS 300 166, and ETS 300 233
- Single 3.3V Supply with 5V Tolerant I/O
- JTAG Boundary Scan as per IEEE 1149.1
- 144-Pin eLQFP Package
|
|
Applications/Uses
- ATM and Frame Relay Equipment
- E1/T1/J1 LAN/WAN Routers
- E1/T1/J1 Multiplexer and Channel Banks
- ISDN Primary Rate Interface
- T1 Digital Cross-Connects
- Wireless Base Stations
|
|
|
|
Key Specifications:
| T/E Carrier & Packetized Products |
| Part Number |
Transmission Standard |
Functions |
Channels |
VSUPPLY
(V) |
EV Kit |
Package/Pins |
Smallest Available Pckg.
(mm2) |
Budgetary Price |
| max w/pins |
See Notes |
| DS26303 |
T1/E1/J1 |
LIU |
8 |
3.3 |
Yes |
|
492.8 |
$16.48 @1k |
|
See All T/E Carrier & Packetized Products (100)
|
Pricing Notes:
This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific prices and delivery, please see the price and availability page or contact an authorized distributor.
|
|
Diagram
Functional Diagram
Application Notes
Product Guides
Reliability Reports
Software/Models
Ordering Information
|
Part Number
|
Free
Sample |
Buy |
Status
|
Package:
TYPE PINS FOOTPRINT
DRAWING CODE/VAR *
|
Temp |
RoHS/Lead-Free?
Materials Analysis
|
| DS26303-75DK
|
|
|
Active |
N/A;
Land Pattern: Not Available
|
0°C to +70°C
|
See data sheet
|
| DS26303L-120
|
|
|
Active |
LQFP;144 pin;492.8 mm²
Outline Drawing:21-0300 (PDF)
Land Pattern: 90-0314 (PDF)
Use pkgcode/variation: C144LE-3*
|
0°C to +70°C
|
RoHS/Lead-Free: No
Materials Analysis |
| DS26303L-120+
|
|
|
Active |
LQFP;144 pin;492.8 mm²
Outline Drawing:21-0300 (PDF)
Land Pattern: 90-0314 (PDF)
Use pkgcode/variation: C144LE+3*
|
0°C to +70°C
|
RoHS/Lead-Free: Lead Free
Materials Analysis |
| DS26303L-75
|
|
|
Active |
LQFP;144 pin;492.8 mm²
Outline Drawing:21-0300 (PDF)
Land Pattern: 90-0314 (PDF)
Use pkgcode/variation: C144LE-3*
|
0°C to +70°C
|
RoHS/Lead-Free: No
Materials Analysis |
| DS26303L-75+
|
|
|
Active |
LQFP;144 pin;492.8 mm²
Outline Drawing:21-0300 (PDF)
Land Pattern: 90-0314 (PDF)
Use pkgcode/variation: C144LE+3*
|
0°C to +70°C
|
RoHS/Lead-Free: Lead Free
Materials Analysis |
| DS26303LN-120+
|
|
|
Active |
LQFP;144 pin;492.8 mm²
Outline Drawing:21-0300 (PDF)
Land Pattern: 90-0314 (PDF)
Use pkgcode/variation: C144LE+3*
|
-40°C to +85°C
|
RoHS/Lead-Free: Lead Free
Materials Analysis |
| DS26303LN-75+
|
|
|
Active |
LQFP;144 pin;492.8 mm²
Outline Drawing:21-0300 (PDF)
Land Pattern: 90-0314 (PDF)
Use pkgcode/variation: C144LE+3*
|
-40°C to +85°C
|
RoHS/Lead-Free: Lead Free
Materials Analysis |
Notes:
- Other options and links for purchasing parts are listed at: http://www.maxim-ic.com/sales.
- Didn't Find What You Need? Ask our applications engineers. Expert assistance in finding parts, usually within one business day.
- Part number suffixes: T or T&R = tape and reel; + = RoHS/lead-free; # = RoHS/lead-exempt; -D = drypack; -U/+U on DS parts = cut tape. More: See Full Data Sheet or Maxim Product Naming Conventions.
- * Some packages have variations, listed on the drawing. "PkgCode/Variation" tells which variation the product uses. Note that "+", "#", "-" in the part number suffix describes RoHS status. Package drawings may show a different suffix character.
|
Similar Products by Function
| DS21448 |
3.3V E1/T1/J1 Quad Line Interface |
| DS26324 |
3.3V, 16-Channel, E1/T1/J1 Short-Haul Line Interface Unit |
|
|
Similar Products by Application
| Ethernet Microwave Radios > LIU |
Evaluation Kits
| DS26303DK |
3.3V, E1/T1/J1, Short-Haul, Octal LIU Design Kit |
Products with Similar Part Numbers
| DS26303DK |
3.3V, E1/T1/J1, Short-Haul, Octal LIU Design Kit |
Didn't Find What You Need?
Information Index
Rev 4;
2007-06-01
This page last modified: 2009-09-22
|
Download
E-Mail