MAX5072

2.2MHz, Dual-Output Buck or Boost Converter with POR and Power-Fail Output

 Overview   Technical Documents   Ordering Info   Related Products   User Comments (0)   All   


Status Explanations for product status codes

Active: In Production.

Description

The MAX5072 is a dual-output DC-DC converter with integrated high-side n-channel power MOSFETs. Each output can be configured either as a buck converter or a boost converter. The MAX5072 is designed to manage the power requirements of xDSL modems. The wide 5.5V to 23V input voltage range allows for the use of inexpensive AC adapters to power the device in xDSL modem applications. Each output is programmable down to 0.8V in the buck mode and up to 28V in the boost mode with an output voltage accuracy of ±1%. In the buck mode, converter 1 and converter 2 can deliver 2A and 1A, respectively. The output switching frequency of each converter can be programmed from 200kHz to 2.2MHz to avoid harmonics in the xDSL frequency band of operation. Each output operates 180° out-of-phase, thus reducing input-capacitor ripple current, size, and cost. A SYNC input facilitates external frequency synchronization. Moreover, a CLKOUT output provides out-of-phase clock signal with respect to converter 2, allowing four-phase operation using two MAX5072 ICs in master-slave configuration.

The MAX5072 includes an internal digital soft-start that reduces inrush current, eliminates output-voltage overshoot, and ensures monotonic rise in output voltage during power-up. The device includes a power-good output and power-on reset as well as manual reset. In addition, each converter output can be shut down individually. The MAX5072 features a "dying gasp" output, which goes low when the input voltage drops below a preprogrammed voltage. Protection features include output short-circuit protection for buck mode and maximum duty-cycle limit for boost operation, as well as thermal shutdown.

The MAX5072 is available in a thermally enhanced 32-pin thin QFN package that can dissipate 2.7W at +70°C ambient temperature. The device is rated for operation over the -40°C to +85°C extended, or -40°C to +125°C automotive operating temperature range.

 

Data Sheet

Download this datasheet in PDF formatDownload Rev 2 (PDF, 1MB)
Send this datasheet to any email addressE-Mail
An evaluation kit is available: MAX5072EVKIT

Key Features

  • 4.5V to 5.5V or 5.5V to 23V Input Supply Voltage Range
  • 0.8V (Buck) to 28V (Boost) Output Voltage
  • Two Independent Output DC-DC Converters with Internal Power MOSFETs
  • Each Output can be Configured in Buck or Boost Mode
  • IOUT1 and IOUT2 of 2A and 1A (Respectively) in Buck Mode
  • 180° Out-of-Phase Operation
  • Clock Output for Four-Phase Operation
  • Switching Frequency Programmable from 200kHz to 2.2MHz
  • Digital Soft-Start and Independent Converter Shutdown
  • SYNC Input, Power-On Reset, Manual Reset, And Power-Fail Output
  • Short-Circuit Protection (Buck)/Maximum Duty-Cycle Limit (Boost)
  • Thermal Shutdown
  • Thermally Enhanced 32-Pin Thin QFN Package Dissipates up to 2.7W at +70°C
 

Applications/Uses

  • Point-of-Load DC-DC Converters
  • XDSL Modems
  • xDSL Routers
   

Key Specifications:

Step-Down Switching Regulators
Part Number VIN
(V)
VIN
(V)
VOUT
(V)
VOUT
(V)
Max. IOUT
(A)
Max. IOUT
(A)
Output Adjust. Method DC-DC Outputs Oper. Freq.
(kHz)
Package/Pins Smallest Available Pckg.
(mm2)
Budgetary Price
min max min max max w/pins See Notes
MAX5072  4.5 23 0.8 28 2 2 Resistor 2 2200
TQFN/32
26 $6.04 @1k
See All Step-Down Switching Regulators (284)
Pricing Notes:
This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific prices and delivery, please see the price and availability page or contact an authorized distributor.

Step-Up Switching Regulators
Part Number VIN
(V)
VIN
(V)
VOUT
(V)
VOUT
(V)
Max. IOUT
(A)
Max. IOUT
(A)
Output Adjust. Method DC-DC Outputs Oper. Freq.
(kHz)
Package/Pins Smallest Available Pckg.
(mm2)
Budgetary Price
min max min max max w/pins See Notes
MAX5072  4.5 23 0.8 28 2 2 Resistor 2 2200
TQFN/32
26 $6.04 @1k
See All Step-Up Switching Regulators (91)
Pricing Notes:
This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific prices and delivery, please see the price and availability page or contact an authorized distributor.


Diagram

MAX5072: Pin Configuration
Pin Configuration

Application Notes

Application Note 3638   2.2MHz Buck or Boost Power Supply for ADSL2+ Chipset
Application Note 3665   External Component Calculator for Setting up a Buck or Boost Converter with the MAX5072/MAX5073

Reliability Reports

Show FIT data for:
Request Reliability Report for:

Software/Models

none

Ordering Information

Filters: Part Number: Package: Temperature: Tape and Reel Sample
Part Number Free
Sample
Buy Status Explanations for product status codes Package:
TYPE PINS FOOTPRINT
DRAWING  CODE/VAR *
Temp RoHS/Lead-Free?
Materials Analysis
MAX5072ETJ    
Active TQFN;32 pin;26 mm²
Outline Drawing:21-0140 (PDF)
Land Pattern: 90-0012 (PDF)
Use pkgcode/variation: T3255-4*
-40°C to +85°C RoHS/Lead-Free: No
Materials Analysis
MAX5072ETJ+  
Active TQFN;32 pin;26 mm²
Outline Drawing:21-0140 (PDF)
Land Pattern: 90-0012 (PDF)
Use pkgcode/variation: T3255+4*
-40°C to +85°C RoHS/Lead-Free: Lead Free
Materials Analysis
MAX5072ETJ+T    
Active TQFN;32 pin;26 mm²
Outline Drawing:21-0140 (PDF)
Land Pattern: 90-0012 (PDF)
Use pkgcode/variation: T3255+4*
-40°C to +85°C RoHS/Lead-Free: Lead Free
Materials Analysis
MAX5072ETJ-T    
Active QFN;32 pin

Land Pattern: Not Available

-40°C to +85°C See data sheet

Notes:
  1. Other options and links for purchasing parts are listed at: http://www.maxim-ic.com/sales.
  2. Didn't Find What You Need? Ask our applications engineers. Expert assistance in finding parts, usually within one business day.
  3. Part number suffixes: T or T&R = tape and reel; + = RoHS/lead-free; # = RoHS/lead-exempt; -D = drypack; -U/+U on DS parts = cut tape. More: See Full Data Sheet or Maxim Product Naming Conventions.
  4. * Some packages have variations, listed on the drawing. "PkgCode/Variation" tells which variation the product uses. Note that "+", "#", "-" in the part number suffix describes RoHS status. Package drawings may show a different suffix character.

Similar Products by Function

MAX5073 2.2MHz, Dual-Output Buck or Boost Converter with Internal Power MOSFETs
See All Step-Down Switching Regulators (310 Products)
See All Step-Up Switching Regulators (100 Products)

Similar Products by Application

Automatic External Defibrillators (AED) > Switching Regulator
Computed Tomography (CT) Imaging > Power
Electric Vehicle Propulsion > DC-DC
Electric-Powered Bikes > DC-DC Power
Electrocardiographs (ECG/EKG) > Switching Regulator
Positron Emission Tomography (PET) Imaging > Power
Power Solutions for Nonportable Applications > Switching Regulators
Programmable Logic Controllers (PLCs) > DC-DC Power
Ultrasound Imaging Systems > DC-DC Converter

Evaluation Kits

MAX5072EVKIT Evaluation Kit for the MAX5072

Products with Similar Part Numbers

MAX5072EVKIT Evaluation Kit for the MAX5072

More Information

New Product Press Release 2005-04-07 ]


Didn't Find What You Need?

Information Index

Document Ref.: 19-3503 Rev 2; 2006-03-10
This page last modified: 2009-09-23


 


Contact Us     |     Privacy Policy     |     Legal Notices
Copyright © 2012 by Maxim Integrated Products