|
DS26504
T1/E1/J1/64KCC BITS Element
|
Status
Active: In Production.
Description
The DS26504 is a building-integrated timing-supply (BITS) clock-recovery element. It also functions as a basic T1/E1 transceiver. The receiver portion can recover a clock from T1, E1, 64kHz composite clock (64KCC), and 6312kHz synchronization timing interfaces. In T1 and E1 modes, the Synchronization Status Message (SSM) can also be recovered. The transmit portion can directly interface to T1, E1, or 64KCC synchronization interfaces as well as source the SSM in T1 and E1 modes. The DS26504 can translate between any of the supported inbound synchronization clock rates to any supported outbound rate. The DS26504 can also accept an 8kHz as well as a 19.44MHz reference clock. A separate output is provided to source a 6312kHz clock. The device is controlled through a parallel, serial, or hardware controller port.
|
|
Data Sheet
Errata DS26504 26504A1.pdfErrata DS26504 26504B2.pdf
|
An evaluation kit is available: DS26504DK
Key Features
- Transmit and Receive T1 BOC SSM Messages with Receive Message Change of State and Validation Indication
- Transmit and Receive E1 Sa(n) Bit SSM Messages with Receive Message Change of State Indication
- Crystal-Less Jitter Attenuator with Bypass Mode for T1 and E1 Operation
- Fully Independent Transmit and Receive Functionality
- Internal Software-Selectable Receive and Transmit Side Termination for 75Ω/100Ω/110Ω/120Ω/133Ω
- Monitor Mode for Bridging Applications
- Accepts 16.384MHz, 12.8MHz, 8.192MHz, 4.096MHz, 2.048MHz, or 1.544MHz Master Clock
- 64kHz, 8kHz, and 400Hz Outputs in Composite Clock Mode
- 8-Bit Parallel Control Port, Multiplexed or Nonmultiplexed, Intel or Motorola
- Serial (SPI) Control Port and Hardware Control Mode
- Provides LOS, AIS, and LOF Indications through Hardware Output Pins
- Fast Transmitter Output Disable through Device Pin for Protection Switching
- IEEE 1149.1 JTAG Boundary Scan
- 3.3V Supply with 5V Tolerant Inputs and Outputs
- Pin and Software Compatible with the DS26502 and DS26503
|
|
Applications/Uses
- BITS Timing
- Rate Conversion
|
|
|
|
Key Specifications:
| T/E Carrier & Packetized Products |
| Part Number |
Transmission Standard |
Functions |
Channels |
In-to-Out Clocks
(MHz) |
VSUPPLY
(V) |
EV Kit |
Package/Pins |
Smallest Available Pckg.
(mm2) |
Budgetary Price |
| max w/pins |
See Notes |
| DS26504 |
| 64kHz Composite Clock - G.703 Level B | | 64kHz - G.703 II.1 Japanese 64kHz Clock | | 64kHz Composite Clock - GR378 | | 64kHz - G.703 II.2 Japanese 6312kHz Clock | | 64kHz Composite Clock - G.703 Level A | | T1/E1/J1 |
|
BITS Element |
1 |
| 0.008 | | 0.064 | | 1.544 | | 2.048 | | 6.312 | | 19.44 |
|
3.3 |
Yes |
|
148.8 |
$16.48 @1k |
|
See All T/E Carrier & Packetized Products (100)
|
Pricing Notes:
This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific prices and delivery, please see the price and availability page or contact an authorized distributor.
|
|
Diagram
Block Diagram
Application Notes
Product Guides
Reliability Reports
Software/Models
Ordering Information
|
Part Number
|
Free
Sample |
Buy |
Status
|
Package:
TYPE PINS FOOTPRINT
DRAWING CODE/VAR *
|
Temp |
RoHS/Lead-Free?
Materials Analysis
|
| DS26504+W
|
|
|
Active |
LQFP;64 pin;148.8 mm²
Outline Drawing:21-0083 (PDF)
Land Pattern: 90-0141 (PDF)
Use pkgcode/variation: C64+8*
|
0°C to +70°C
|
RoHS/Lead-Free: Lead Free
Materials Analysis |
| DS26504L
|
|
|
Active |
LQFP;64 pin;148.8 mm²
Outline Drawing:21-0083 (PDF)
Land Pattern: 90-0141 (PDF)
Use pkgcode/variation: C64-8*
|
0°C to +70°C
|
See data sheet
|
| DS26504L+
|
|
|
Active |
LQFP;64 pin;148.8 mm²
Outline Drawing:21-0083 (PDF)
Land Pattern: 90-0141 (PDF)
Use pkgcode/variation: C64+8*
|
0°C to +70°C
|
RoHS/Lead-Free: Lead Free
Materials Analysis |
| DS26504LN
|
|
|
Active |
LQFP;64 pin;148.8 mm²
Outline Drawing:21-0083 (PDF)
Land Pattern: 90-0141 (PDF)
Use pkgcode/variation: C64-8*
|
-40°C to +85°C
|
See data sheet
|
| DS26504LN+
|
|
|
Active |
LQFP;64 pin;148.8 mm²
Outline Drawing:21-0083 (PDF)
Land Pattern: 90-0141 (PDF)
Use pkgcode/variation: C64+8*
|
-40°C to +85°C
|
RoHS/Lead-Free: Lead Free
Materials Analysis |
| DS26504LN+T&R
|
|
|
Active |
LQFP;64 pin;148.8 mm²
Outline Drawing:21-0083 (PDF)
Land Pattern: 90-0141 (PDF)
Use pkgcode/variation: C64+8*
|
-40°C to +85°C
|
RoHS/Lead-Free: Lead Free
Materials Analysis |
| DS26504LNB2
|
|
|
Active |
LQFP;64 pin;148.8 mm²
Outline Drawing:21-0083 (PDF)
Land Pattern: 90-0141 (PDF)
Use pkgcode/variation: C64-8*
|
-40°C to +85°C
|
See data sheet
|
| DS26504LNB2+
|
|
|
Active |
LQFP;64 pin;148.8 mm²
Outline Drawing:21-0083 (PDF)
Land Pattern: 90-0141 (PDF)
Use pkgcode/variation: C64+8*
|
-40°C to +85°C
|
RoHS/Lead-Free: Lead Free
Materials Analysis |
| DS26504NW0
|
|
|
Active |
LQFP;64 pin;148.8 mm²
Outline Drawing:21-0083 (PDF)
Land Pattern: 90-0141 (PDF)
Use pkgcode/variation: C64-8*
|
-40°C to +85°C
|
See data sheet
|
Notes:
- Other options and links for purchasing parts are listed at: http://www.maxim-ic.com/sales.
- Didn't Find What You Need? Ask our applications engineers. Expert assistance in finding parts, usually within one business day.
- Part number suffixes: T or T&R = tape and reel; + = RoHS/lead-free; # = RoHS/lead-exempt; -D = drypack; -U/+U on DS parts = cut tape. More: See Full Data Sheet or Maxim Product Naming Conventions.
- * Some packages have variations, listed on the drawing. "PkgCode/Variation" tells which variation the product uses. Note that "+", "#", "-" in the part number suffix describes RoHS status. Package drawings may show a different suffix character.
|
Similar Products by Function
Similar Products by Application
| Telecom Line Cards: T1, E1, J1 > Single-Chip Transceivers: Combination T1, E1, J1 |
| Telecom Line Cards: T1, E1, J1 > Framers: E1 Only |
| Telecom Line Cards: T1, E1, J1 > Framers: T1, J1 Only |
| Telecom Line Cards: T3, E3, STS-1 > Line Interface Units |
| Telecom Line Cards: T3, E3, STS-1 > Single-Chip Transceivers with or without ATM/Packet PHY |
| Transport Nodes, Access Nodes, Add/Drop Multiplexers, and Digital Cross-Connects > Clock Rate Adapters |
| Transport Nodes, Access Nodes, Add/Drop Multiplexers, and Digital Cross-Connects > Clock Recovery |
| Transport Nodes, Access Nodes, Add/Drop Multiplexers, and Digital Cross-Connects > T1/E1/J1 Single-Chip Transceivers (Framer + LIU) |
Evaluation Kits
| DS26504DK |
T1/E1/J1/64K/8KCC BITS Element Design Kit |
Products with Similar Part Numbers
| DS26504DK |
T1/E1/J1/64K/8KCC BITS Element Design Kit |
More Information
Didn't Find What You Need?
Information Index
Rev 8;
2008-08-01
This page last modified: 2009-10-06
|
Download
E-Mail