MAX19538

12-Bit, 95Msps, 3.3V ADC

 Overview   Technical Documents   Ordering Info   Related Products   User Comments (0)   All   


Status Explanations for product status codes

Active: In Production.

Description

The MAX19538 is a 3.3V, 12-bit, 95Msps analog-to-digital converter (ADC) featuring a fully differential wideband track-and-hold (T/H) input amplifier, driving a low-noise internal quantizer. The analog input accepts single-ended or differential signals. The MAX19538 is optimized for low power, small size, and high dynamic performance. Excellent dynamic performance is maintained from baseband to input frequencies of 175MHz and beyond, making the MAX19538 ideal for intermediate frequency (IF) sampling applications.

Powered from a single 3.3V supply, the MAX19538 consumes only 492mW while delivering a typical 68.4dB signal-to-noise ratio (SNR) performance at a 175MHz input frequency. In addition to low operating power, the MAX19538 features a 63µW power-down mode to conserve power during idle periods.

A flexible reference structure allows the MAX19538 to use the internal 2.048V bandgap reference or accept an externally applied reference. The reference structure allows the full-scale analog input range to be adjusted from ±0.35V to ±1.10V. The MAX19538 provides a common-mode reference to simplify design and reduce external component count in differential analog input circuits.

The MAX19538 supports either a single-ended or differential input clock drive. The internal clock duty-cycle equalizer accepts a wide range of clock duty cycles.

Analog-to-digital conversion results are available through a 12-bit, parallel, CMOS-compatible output bus. The digital output format is pin selectable to be either two's complement or Gray code. A data-valid indicator eliminates external components that are normally required for reliable digital interfacing. A separate digital power input accepts a wide 1.7V to 3.6V supply allowing the MAX19538 to interface with various logic levels.

The MAX19538 is available in a 6mm x 6mm x 0.8mm, 40-pin thin QFN package with exposed paddle (EP), and is specified for the extended industrial (-40°C to +85°C) temperature range.

See a parametric table of the complete family of pin-compatible, 12-/14-bit high-speed ADCs.
 

Data Sheet

Download this datasheet in PDF formatDownload Rev 0 (PDF, 652kB)
Send this datasheet to any email addressE-Mail
An evaluation kit is available: MAX1211EVKIT

Key Features

  • Direct IF Sampling Up to 400MHz
  • Excellent Dynamic Performance
    • 70.9dB/68.4dB SNR at fIN = 3MHz/175MHz
    • 89.0dBc/76.2dBc SFDR at fIN = 3MHz/175MHz
    • -71.5dBFS Small-Signal Noise Floor
  • 3.3V Low-Power Operation
    • 465mW (Single-Ended Clock Mode)
    • 492mW (Differential Clock Mode)
    • 63µW (Power-Down Mode)
  • Fully Differential or Single-Ended Analog Input
  • Adjustable Full-Scale Analog Input Range: ±0.35V to ±1.10V
  • Common-Mode Reference
  • CMOS-Compatible Outputs in Two's Complement or Gray Code
  • Data-Valid Indicator Simplifies Digital Design
  • Data Out-of-Range Indicator
  • Miniature 6mm x 6mm x 0.8mm 40-Pin Thin QFN Package with Exposed Paddle
  • Evaluation Kit Available (Order MAX1211EVKIT)
 

Applications/Uses

  • Cellular, Point-to-Point Microwave, HFC
  • IF and Baseband Communication Receivers: Cellular, Point-to-Point Microwave, HFC, WLAN
  • Low-Power Data Acquisition
  • Medical Imaging Including Positron Emission Tomography (PET)
  • Portable Instrumentation
  • Video Imaging
   

Key Specifications:

High-Speed ADCs (> 5Msps)
Part Number Input Chan. Resolution
(bits)
Sample Rate
(Msps)
AC Specs
(MHz)
SFDR
(dBc)
SINAD
(dB)
SNR
(dB)
THD
(dB)
INL
(±LSB)
DNL
(±LSB)
ICC
(mA)
Data Bus Interface Smallest Available Pckg.
(mm2)
max ≥ @ fIN min typ max w/pins
MAX19538  1 12 95 175 76.2 59 68.4 -74.7 0.4 0.3 159 µP/12 37.2
See All High-Speed ADCs (> 5Msps) (75)
Pricing Notes:
This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific prices and delivery, please see the price and availability page or contact an authorized distributor.


Diagram

MAX19538: Functional Diagram
Functional Diagram

Reliability Reports

Reliability Report: MAX19538.pdf
Show FIT data for:

Software/Models

none

Ordering Information

Filters: Part Number: Package: Temperature: Tape and Reel Sample
Part Number Free
Sample
Buy Status Explanations for product status codes Package:
TYPE PINS FOOTPRINT
DRAWING  CODE/VAR *
Temp RoHS/Lead-Free?
Materials Analysis
MAX19538ETL    
Active TQFN;40 pin;37.2 mm²
Outline Drawing:21-0141 (PDF)
Land Pattern: 90-0054 (PDF)
Use pkgcode/variation: T4066-3*
-40°C to +85°C RoHS/Lead-Free: No
Materials Analysis
MAX19538ETL+  
Active TQFN;40 pin;37.2 mm²
Outline Drawing:21-0141 (PDF)
Land Pattern: 90-0054 (PDF)
Use pkgcode/variation: T4066+3*
-40°C to +85°C RoHS/Lead-Free: Lead Free
Materials Analysis
MAX19538ETL+T    
Active TQFN;40 pin;37.2 mm²
Outline Drawing:21-0141 (PDF)
Land Pattern: 90-0054 (PDF)
Use pkgcode/variation: T4066+3*
-40°C to +85°C RoHS/Lead-Free: Lead Free
Materials Analysis
MAX19538ETL-T    
Active QFN;40 pin

Land Pattern: Not Available

-40°C to +85°C See data sheet

Notes:
  1. Other options and links for purchasing parts are listed at: http://www.maxim-ic.com/sales.
  2. Didn't Find What You Need? Ask our applications engineers. Expert assistance in finding parts, usually within one business day.
  3. Part number suffixes: T or T&R = tape and reel; + = RoHS/lead-free; # = RoHS/lead-exempt; -D = drypack; -U/+U on DS parts = cut tape. More: See Full Data Sheet or Maxim Product Naming Conventions.
  4. * Some packages have variations, listed on the drawing. "PkgCode/Variation" tells which variation the product uses. Note that "+", "#", "-" in the part number suffix describes RoHS status. Package drawings may show a different suffix character.

Similar Products by Function

MAX1211 12-Bit, 65Msps, IF Sampling ADC
MAX1207 12-Bit, 65Msps ADC
MAX1206 12-Bit, 40Msps ADC
MAX12553 14-Bit, 65Msps, 3.3V ADC
MAX1209 12-Bit, 80Msps, 3.3V IF-Sampling ADC
MAX1208 12-Bit, 80Msps, 3.3V ADC
MAX12554 14-Bit, 80Msps, 3.3V ADC
MAX12555 14-Bit, 95Msps, 3.3V ADC
See All High-Speed ADCs (> 5Msps) (78 Products)

Evaluation Kits

MAX1211EVKIT Evaluation Kit for the MAX1211, MAX1206, MAX1207, MAX1208, MAX1209, and MAX19538


Didn't Find What You Need?

Information Index

Overview

 

Technical Documents

 

Ordering Info

 

Related Products

 
Description
Key Features
Applications/Uses
Key Specifications
Diagram
Notes and Comments
  Data Sheet
Application Notes
Evaluation Kits
Product Guides
Reliability Reports
Software/Models
  Price and Availability
Samples
Buy Online
Package Information
Lead-Free Information
  Similar Products by Function
Similar Products by Application
Evaluation Kits
Products with Similar Part Numbers
Products Used With This
 
Document Ref.: 19-3403 Rev 0; 2004-11-22
This page last modified: 2009-10-06


 


Contact Us     |     Privacy Policy     |     Legal Notices
Copyright © 2012 by Maxim Integrated Products