MAX12555

14-Bit, 95Msps, 3.3V ADC

 Overview   Technical Documents   Ordering Info   Related Products   User Comments (0)   All   


Status Explanations for product status codes

Active: In Production.

Description

The MAX12555 is a 3.3V, 14-bit, 95Msps analog-to-digital converter (ADC) featuring a fully differential wideband track-and-hold (T/H) input amplifier, driving a low-noise internal quantizer. The analog input stage accepts single ended or differential signals. The MAX12555 is optimized for high dynamic performance, low power, and small size. Excellent dynamic performance is maintained from baseband to input frequencies of 175MHz and beyond, making the MAX12555 ideal for intermediate frequency (IF) sampling applications.

Powered from a single 3.3V supply, the MAX12555 consumes only 497mW while delivering a typical 72.1dB signal-to-noise ratio (SNR) performance at a 175MHz input frequency. In addition to low operating power, the MAX12555 features a 300µW power-down mode to conserve power during idle periods.

A flexible reference structure allows the MAX12555 to use the internal 2.048V bandgap reference or accept an externally applied reference. The reference structure allows the full-scale analog input range to be adjusted from ±0.35V to ±1.10V. The MAX12555 provides a common- mode reference to simplify design and reduce external component count in differential analog input circuits.

The MAX12555 supports either a single-ended or differential input clock. Wide variations in the clock duty cycle are compensated with the ADC's internal dutycycle equalizer (DCE).

ADC conversion results are available through a 14-bit, parallel, CMOS-compatible output bus. The digital output format is pin selectable to be either two's complement or Gray code. A data-valid indicator eliminates external components that are normally required for reliable digital interfacing. A separate digital power input accepts a wide 1.7V to 3.6V supply, allowing the MAX12555 to interface with various logic levels.

The MAX12555 is available in a 6mm x 6mm x 0.8mm, 40-pin thin QFN package with exposed paddle (EP), and is specified for the extended industrial (-40°C to +85°C) temperature range.

See a parametric table of the complete family of pin-compatible, 12-/14-bit high-speed ADCs.

 

Data Sheet

Download this datasheet in PDF formatDownload Rev 1 (PDF, 1013.8kB)
Send this datasheet to any email addressE-Mail
An evaluation kit is available: MAX12553EVKIT, MAX12554EVKIT, MAX12555EVKIT

Key Features

  • Direct IF Sampling Up to 400MHz
  • Excellent Dynamic Performance
    • 74dB/72dB SNR at fIN = 3MHz/175MHz
    • 87.4dBc/76.2dBc SFDR at fIN = 3MHz/175MHz
  • Low Noise Floor: 74.6dBFS
  • 3.3V Low-Power Operation
    • 465mW (Single-Ended Clock Mode)
    • 497mW (Differential Clock Mode)
    • 300µW (Power-Down Mode)
  • Fully Differential or Single-Ended Analog Input
  • Adjustable Full-Scale Analog Input Range
    • ±0.35V to ±1.10V
  • Common-Mode Reference
  • CMOS-Compatible Outputs in Two's Complement or Gray Code
  • Data-Valid Indicator Simplifies Digital Interface
  • Data Out-of-Range Indicator
  • Miniature, 6mm x 6mm x 0.8mm 40-Pin Thin QFN Package with Exposed Paddle
  • Evaluation Kit Available (Order MAX12555EVKIT)
 

Applications/Uses

  • IF and Baseband Communication Receivers: Cellular, Point-to-Point Microwave, HFC, WLAN
  • Low-Power Data Acquisition
  • Medical Imaging Including Positron Emission Tomography (PET)
  • Portable Instrumentation
  • Video Imaging
   

Key Specifications:

High-Speed ADCs (> 5Msps)
Part Number Input Chan. Resolution
(bits)
Sample Rate
(Msps)
AC Specs
(MHz)
SFDR
(dBc)
SINAD
(dB)
SNR
(dB)
THD
(dB)
INL
(±LSB)
DNL
(±LSB)
ICC
(mA)
Data Bus Interface Smallest Available Pckg.
(mm2)
max ≥ @ fIN min typ max w/pins
MAX12555  1 14 95 175 74.7 69.8 72.1 -73.6 1.6 0.65 160.8 µP/14 37.2
See All High-Speed ADCs (> 5Msps) (75)
Pricing Notes:
This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific prices and delivery, please see the price and availability page or contact an authorized distributor.


Diagram

MAX12555: Functional Diagram
Functional Diagram

Application Notes

Application Note 3190   Coherent Sampling Calculator (CSC)
Application Note 3491   Schematic and Layout Guidelines for High-Speed Data Converters
Application Note 3716   Folded-Frequency Calculator
Tutorial 4700   Introduction to Medical Instruments and Growing Trend for Point-of-Care and Near-Patient Testing
Tutorial 4993   Reduce the Chances of Human Error: Part 2, Super Amps and Filters for Analog Interface

Reliability Reports

Show FIT data for:
Request Reliability Report for:

Software/Models

MAX12555 IBIS Model

Ordering Information

Filters: Part Number: Package: Temperature: Tape and Reel Sample
Part Number Free
Sample
Buy Status Explanations for product status codes Package:
TYPE PINS FOOTPRINT
DRAWING  CODE/VAR *
Temp RoHS/Lead-Free?
Materials Analysis
MAX12555ETL    
Active TQFN;40 pin;37.2 mm²
Outline Drawing:21-0141 (PDF)
Land Pattern: 90-0054 (PDF)
Use pkgcode/variation: T4066-3*
-40°C to +85°C RoHS/Lead-Free: No
Materials Analysis
MAX12555ETL+  
Active TQFN;40 pin;37.2 mm²
Outline Drawing:21-0141 (PDF)
Land Pattern: 90-0054 (PDF)
Use pkgcode/variation: T4066+3*
-40°C to +85°C RoHS/Lead-Free: Lead Free
Materials Analysis
MAX12555ETL+T    
Active QFN;40 pin

Land Pattern: Not Available

-40°C to +85°C See data sheet
MAX12555ETL-T    
Active QFN;40 pin

Land Pattern: Not Available

-40°C to +85°C See data sheet

Notes:
  1. Other options and links for purchasing parts are listed at: http://www.maxim-ic.com/sales.
  2. Didn't Find What You Need? Ask our applications engineers. Expert assistance in finding parts, usually within one business day.
  3. Part number suffixes: T or T&R = tape and reel; + = RoHS/lead-free; # = RoHS/lead-exempt; -D = drypack; -U/+U on DS parts = cut tape. More: See Full Data Sheet or Maxim Product Naming Conventions.
  4. * Some packages have variations, listed on the drawing. "PkgCode/Variation" tells which variation the product uses. Note that "+", "#", "-" in the part number suffix describes RoHS status. Package drawings may show a different suffix character.

Similar Products by Function

MAX1211 12-Bit, 65Msps, IF Sampling ADC
MAX1207 12-Bit, 65Msps ADC
MAX1206 12-Bit, 40Msps ADC
MAX12553 14-Bit, 65Msps, 3.3V ADC
MAX1209 12-Bit, 80Msps, 3.3V IF-Sampling ADC
MAX1208 12-Bit, 80Msps, 3.3V ADC
MAX12554 14-Bit, 80Msps, 3.3V ADC
MAX19538 12-Bit, 95Msps, 3.3V ADC
See All High-Speed ADCs (> 5Msps) (78 Products)

Similar Products by Application

Flow Cytometers > Analog-to-Digital Converter (ADC)

Evaluation Kits

MAX12553EVKIT, MAX12554EVKIT, ... Evaluation Kit for the MAX12553, MAX12554, and MAX12555

Products with Similar Part Numbers

MAX12553EVKIT, MAX12554EVKIT, ... Evaluation Kit for the MAX12553, MAX12554, and MAX12555


Didn't Find What You Need?

Information Index

Document Ref.: 19-3447 Rev 1; 2005-03-18
This page last modified: 2009-10-06


 


Contact Us     |     Privacy Policy     |     Legal Notices
Copyright © 2012 by Maxim Integrated Products