Maxim > Products > Microcontrollers > DS80C410, DS80C411

DS80C410, DS80C411

Network Microcontrollers with Ethernet and CAN

Overview

Technical Documents

Ordering Info

Status

Active: In Production.

Description

The DS80C410/DS80C411 network microcontrollers offer the highest integration available in an 8051 device. Peripherals include a 10/100 Ethernet MAC, three serial ports, an optional CAN 2.0B controller, 1-Wire® Master, and 64 I/O pins. The DS80C410 and DS80C411 also include 64KB internal SRAM for user application storage and network stack.

To enable access to the network, a full application accessible TCP IPv4/6 network stack and OS are provided in the ROM. The network stack supports up to 32 simultaneous TCP connections and can transfer up to 5Mbps through the Ethernet MAC. Its maximum system clock frequency of 75MHz results in a minimum instruction cycle time of 54ns. Access to large program or data memory areas is simplified with a 24-bit addressing scheme that supports up to 16MB of contiguous memory.

To accelerate data transfers between the microcontroller and memory, the DS80C410 and DS80C411 provide four data pointers, each of which can be configured to automatically increment or decrement upon execution of certain data pointer-related instructions. High-speed shift, normalization, accumulate functions and 32-bit/16-bit multiply and divide operations are optimized by the DS80C410/DS80C411 hardware math accelerator.

The High-Speed Microcontroller User's Guide and the High-Speed Microcontroller User's Guide: Network Microcontroller Supplement should be used in conjunction with this data sheet. Download both at: www.maxim-ic.com/user_guides.

Comparison Table

Part Number
and
Description

Internal Program Memory

Internal MOVX SRAM

Serial Ports

16-bit Timers

Data Pointers

10/100 Ethernet MAC

1-Wire Master

Watchdog

Power Fail Reset & Interrupt

Power Mgmt. Mode

Supply Voltage (V)

Package

DS80C400
Network Microcontroller

64kB ROM

1kB

Yes

1.8
3.3

100/LQFP

DS80C410
Network Microcontrollers with Ethernet and CAN

64kB ROM

73.5kB

Yes

1.8
3.3

100/LQFP

DS80C411
Network Microcontrollers with Ethernet MAC

64kB ROM

73.5kB

Yes

1.8
3.3

100/LQFP

Data Sheet

Download	Rev 4	(PDF, 2.9MB)
E-Mail

Errata DS80C410 80C410A1.pdf
Errata DS80C411 80C411A2.pdf

Key Features

High-Performance Architecture
- Single 8051 Instruction Cycle in 54ns
- DC to 75MHz Clock Rate
- Flat 16MB Address Space
- Four Data Pointers with Auto-Increment/Decrement and Select-Accelerate Data Movement
- 16/32-Bit Math Accelerator
Multitiered Networking and I/O
- 10/100 Ethernet Media Access Controller (MAC)
- Optional CAN 2.0B Controller
- 1-Wire Net Controller
- Three Full-Duplex Hardware Serial Ports
- Up to Eight Bidirectional 8-Bit Ports (64 Digital I/O Pins)
Robust ROM Firmware
- Supports Network Boot Over Ethernet Using DHCP and TFTP
- Full, Application-Accessible TCP/IP Network Stack
- Supports IPv4 and IPv6
- Implements UDP, TCP, DHCP, ICMP, and IGMP
- Preemptive, Priority-Based Task Scheduler
- MAC Address Can Optionally Be Acquired from IEEE-Registered DS2502-E48
10/100 Ethernet Mac
- Flexible IEEE 802.3 MII (10/100Mbps) and ENDEC (10Mbps) Interfaces Allow Selection of PHY
- Low-Power Operation: Ultra-Low-Power Sleep Mode with Magic Packet® and Wake-Up Frame Detection
- 8kB On-Chip Tx/Rx Packet Data Memory with Buffer Control Unit Reduces Load on CPU
- Half- or Full-Duplex Operation with Flow Control
- Multicast/Broadcast Address Filtering with VLAN Support

Features continued on page 34 of the full data sheet.

Applications/Uses

Data Converters (Serial-to-Ethernet, CAN-to-Ethernet)
Environmental Monitoring
Home/Office Automation
Industrial Control and Automation
Network Sensors
Remote Data-Collection
Transaction/Payment Terminals
Vending

Key Specifications:

Microcontrollers

Part Number

MCU Core

Core Clock Speed
(MHz)

Data Processing

Internal SRAM
(KBytes)

USARTs

Timer Features

Budgetary Price

max

See Notes

DS80C410

8051 (CISC)

8-bit

Watchdog

$10.30 @1k

DS80C411

$9.27 @1k

See All Microcontrollers (38)

Pricing Notes:
This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific prices and delivery, please see the price and availability page or contact an authorized distributor.

Diagram

Block Diagram

Application Notes

Application Note 613		Using the Keil C Compiler for the DS80C400/DS80C410/DS80C411
Application Note 2935		Design Considerations for CAN Bus and Asynchronous Serial
Application Note 3421		Interfacing 8051-based Microcontrollers to an SCI Port
Application Note 3550		Using the IAR compiler for the DS80C400
Reference Design 4206		Choosing the Right 1-Wire® Master for Embedded Applications
User Guide 4827		High-Speed Microcontroller User's Guide
User Guide 4832		High-Speed Microcontroller User's Guide: Network Microcontroller Supplement

Reliability Reports

Reliability Report:

DS80C410.pdf DS80C411.pdf

Software/Models

Supplement Guide

Ordering Information

Filters:

Part Number:

Package:

Temperature:

Tape and Reel

Sample

Part Number	Free Sample	Buy	Status	Package: TYPE PINS FOOTPRINT DRAWING CODE/VAR *	Temp	RoHS/Lead-Free? Materials Analysis
DS80C410-FNY			Active	LQFP;100 pin;262.4 mm² Outline Drawing:21-0297 (PDF) Land Pattern: 90-0295 (PDF) Use pkgcode/variation: C100L-1*	-40°C to +85°C	RoHS/Lead-Free: No Materials Analysis
DS80C410-FNY+			Active	LQFP;100 pin;262.4 mm² Outline Drawing:21-0297 (PDF) Land Pattern: 90-0295 (PDF) Use pkgcode/variation: C100L+1*	-40°C to +85°C	RoHS/Lead-Free: Lead Free Materials Analysis
DS80C411-FNY			Active	LQFP;100 pin;262.4 mm² Outline Drawing:21-0297 (PDF) Land Pattern: 90-0295 (PDF) Use pkgcode/variation: C100L-1*	-40°C to +85°C	RoHS/Lead-Free: No Materials Analysis
DS80C411-FNY+			Active	LQFP;100 pin;262.4 mm² Outline Drawing:21-0297 (PDF) Land Pattern: 90-0295 (PDF) Use pkgcode/variation: C100L+1*	-40°C to +85°C	RoHS/Lead-Free: Lead Free Materials Analysis

Notes:

Other options and links for purchasing parts are listed at: http://www.maxim-ic.com/sales.
Didn't Find What You Need? Ask our applications engineers. Expert assistance in finding parts, usually within one business day.
Part number suffixes: T or T&R = tape and reel; + = RoHS/lead-free; # = RoHS/lead-exempt; -D = drypack; -U/+U on DS parts = cut tape. More: See Full Data Sheet or Maxim Product Naming Conventions.
* Some packages have variations, listed on the drawing. "PkgCode/Variation" tells which variation the product uses. Note that "+", "#", "-" in the part number suffix describes RoHS status. Package drawings may show a different suffix character.

Similar Products by Function

DS80C400	Network Microcontroller
See All Microcontrollers (39 Products)

Similar Products by Application

Network Access Control > Network Microcontroller

Network Audio > Network Microcontroller

Programmable Logic Controllers (PLCs) > Controller

Serial-to-Ethernet Protocol Converters > Network Microcontroller

Products with Similar Part Numbers

DS80C320, DS80C323	High-Speed/Low-Power Microcontrollers
DS80C310	High-Speed Microcontroller
DS80C390	Dual CAN High-Speed Microprocessor
DS80C400-KIT	DS80C400 Evaluation Kit
DS80C400	Network Microcontroller

More Information

High-Speed Microcontroller User's Guide (PDF)
High-Speed Microcontroller User's Guide: Network Microcontroller Supplement (PDF)

Didn't Find What You Need?

Next Day Product Selection Assistance from Applications Engineers
Parametric Search
Applications Help

Information Index

Document Ref.: 19-4659 Rev 4; 2009-06-16
This page last modified: 2011-12-07