|
DS2788
Stand-Alone Fuel-Gauge IC with LED Display Drivers
The Industry's Smallest Stand-Alone Fuel Gauge That Integrates LED Display Drivers and a Pushbutton Input for Multiple Li+ Batteries
|
Status
Description
The DS2788 measures voltage, temperature, and current, and estimates available capacity for rechargeable lithium-ion (Li+) and Li+ polymer batteries. Cell characteristics and application parameters used in the calculations are stored in on-chip EEPROM. The available capacity registers report a conservative estimate of the amount of charge that can be removed given the current temperature, discharge rate, stored charge, and application parameters. Capacity estimation is reported in mAh remaining and percentage of full.
LED display drivers and a debounced input make display of the capacity information easy. The LED pins can directly sink current, requiring only a resistor for setting the current in the LED display, thus reducing space and
cost.
|
|
Data Sheet
|
NOTE: This product uses the following:DS2788K_EVKit_Installation_v1_5_092811.zip
Key Features
- Five 30mA Open-Drain Drivers for Driving LED Fuel-Gauge Display
- Debounced Fuel-Gauge Display Enable
- Internal Voltage Measurement Gain Register for Trimming External Voltage-Divider
- Pin for Driving FETs to Enable Voltage-Divider Only During Voltage Measurement, Conserving Power
- Precision Voltage, Temperature, and Current Measurement System
- Accurate, Temperature-Stable, Internal Time Base
- Absolute and Relative Capacity Estimated from Coulomb Count, Discharge Rate, Temperature, and Battery Cell Characteristics
- Accurate Warning of Low Battery Conditions
- Automatic Backup of Coulomb Count and Age Estimation to Nonvolatile (NV) EEPROM
- Gain and Tempco Calibration Allows the Use of Low-Cost Sense Resistors
- 24-Byte Battery/Application Parameter EEPROM
- 16-Byte User EEPROM
- Unique ID and Multidrop 1-Wire® Interface
- 14-Pin TSSOP Package
|
|
Applications/Uses
- Digital Cameras
- Electric Bicycles
- Electric Vehicles
- Power Tools
- Uninterruptible Power Supply
|
|
|
|
Key Specifications:
| Battery Protectors, Selectors and Monitors |
| Part Number |
Functions |
Battery Type |
Interface |
User Data Storage
(Bytes) |
Parameters Measured |
VSUPPLY
(V) |
VSUPPLY
(V) |
Package/Pins |
Smallest Available Pckg.
(mm2) |
Oper. Temp.
(°C) |
Budgetary Price |
| min |
max |
max w/pins |
See Notes |
| DS2788 |
Fuel Gauge |
1-10 Cell Li-Ion |
1-Wire |
16 EEPROM |
| Current | | Temperature | | Voltage |
|
2.5 |
5.5 |
|
33.4 |
-40 to +85 |
$2.93 @1k |
|
See All Battery Protectors, Selectors and Monitors (29)
|
Pricing Notes:
This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific prices and delivery, please see the price and availability page or contact an authorized distributor.
|
|
Diagram
Typical Operating Circuit
Application Notes
Reliability Reports
Software/Models
Ordering Information
|
Part Number
|
Free
Sample |
Buy |
Status
|
Recommended Replacement |
Package:
TYPE PINS FOOTPRINT
DRAWING CODE/VAR *
|
Temp |
RoHS/Lead-Free?
Materials Analysis
|
| DS2788E+
|
|
|
Active |
|
TSSOP;14 pin;33.4 mm²
Outline Drawing:21-0066 (PDF)
Land Pattern: 90-0113 (PDF)
Use pkgcode/variation: U14+1*
|
-40°C to +85°C
|
RoHS/Lead-Free: Lead Free
Materials Analysis |
| DS2788E+T&R
|
|
|
Active |
|
TSSOP;14 pin;33.4 mm²
Outline Drawing:21-0066 (PDF)
Land Pattern: 90-0113 (PDF)
Use pkgcode/variation: U14+1*
|
-55°C to +125°C
|
RoHS/Lead-Free: Lead Free
Materials Analysis |
| DS2788EVKIT+
|
|
|
Active |
|
KIT;
Land Pattern: Not Available
|
|
See data sheet
|
| DS2788K
|
|
N/A |
No Longer Available |
DS2788EVKIT+
|
TSSOP;14 pin;33.4 mm²
Outline Drawing:21-0066 (PDF)
Land Pattern: 90-0113 (PDF)
Use pkgcode/variation: U14+1*
|
-40°C to +85°C
|
RoHS/Lead-Free: Lead Free
Materials Analysis |
Notes:
- Other options and links for purchasing parts are listed at: http://www.maxim-ic.com/sales.
- Didn't Find What You Need? Ask our applications engineers. Expert assistance in finding parts, usually within one business day.
- Part number suffixes: T or T&R = tape and reel; + = RoHS/lead-free; # = RoHS/lead-exempt; -D = drypack; -U/+U on DS parts = cut tape. More: See Full Data Sheet or Maxim Product Naming Conventions.
- * Some packages have variations, listed on the drawing. "PkgCode/Variation" tells which variation the product uses. Note that "+", "#", "-" in the part number suffix describes RoHS status. Package drawings may show a different suffix character.
|
Similar Products by Function
Similar Products by Application
More Information
Didn't Find What You Need?
Information Index
Document Ref.: 19-4639
Rev 2;
2009-06-22
This page last modified: 2009-10-20
|
Download
E-Mail