DS3994

4-Channel Cold-Cathode Fluorescent Lamp Controller

Allows the Implementation of Scanning Backlight Schemes Using Only One CCFL Controller IC

 Overview   Technical Documents   Ordering Info   Related Products   User Comments (0)   All   


Status Explanations for product status codes

Active: In Production.

Description

The DS3994 is a 4-channel controller for cold-cathode fluorescent lamps (CCFLs) that backlight liquid crystal displays (LCDs) in TV and PC monitor applications. The DS3994's features make it suitable for use in even the largest LCDs, while its low BOM cost makes it ideal for the entire range of LCD TVs and monitors.

The DS3994 can stagger the lamp bursts from each of the four channels. This feature allows scanning backlight schemes for video quality improvement to be implemented using a single CCFL controller IC, making it very simple and inexpensive to provide this enhancement. In addition, staggering the bursts from each channel can be used to minimize current ripple on the display power supply, which is especially important for larger LCDs. The relative stagger between each of the channels is programmable, so this feature can be tailored to the specific application.

The DS3994 uses a push-pull drive architecture but it can also support full and half bridge drive schemes. Contact the factory for more details.
 

Data Sheet

Download this datasheet in PDF formatDownload Rev 1 (PDF, 444kB)
Send this datasheet to any email addressE-Mail

Key Features

  • High-Density CCFL Controller for LCD TV and PC Monitor Backlights
  • Programmable Staggered Start for Burst Dimming on Each Channel
  • Strike Frequency Boost Option
  • Programmable Strike Time
  • Can Be Easily Cascaded
  • Minimal External Components
  • Analog Brightness Control
  • Gate Driver Phasing Minimizes DC Supply Current Surges
  • Per-Channel Lamp Fault Monitoring for Lamp Open, Lamp Overcurrent, Failure to Strike, and Overvoltage Conditions
  • Accurate (±2%) On-Board Oscillator Lamp Frequency (20kHz to 80kHz)
  • Wide Range On-Board DPWM Burst-Dimming Oscillator (22.5Hz to 440Hz)
  • Can Be Synchronized to External Sources for the Lamp and DPWM Frequencies
  • < 10% to 100% Dimming Range
  • Soft-Start Minimizes Audible Transformer Noise
  • I²C-Compatible Serial Port and On-Board Nonvolatile (NV) Memory Allow Device Customization
  • 3-Byte NV User Memory for Storage of Serial Numbers and Date Codes
  • 4.5V to 5.5V Single-Supply Operation
  • -40°C to +85°C Temperature Range
  • 28-Pin SO (300 mils) Package
 

Applications/Uses

  • LCD PC Monitors
  • LCD-TVs
   

Key Specifications:

CCFL Controllers
Part Number VIN
(V)
VIN
(V)
Topology Channels Dimming Interface Freq. EV Kit Package/Pins Smallest Available Pckg.
(mm2)
Oper. Temp.
(°C)
min max max w/pins
DS3994  4.5 5.5 Push-Pull 4
Analog
DPWM
I2C
SMBus
Fixed PWM No
SOIC(W)/28
192.8 -40 to +85
See All CCFL Controllers (14)
Pricing Notes:
This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific prices and delivery, please see the price and availability page or contact an authorized distributor.


Diagram

DS3994: Typical Operating Circuit
Typical Operating Circuit

Application Notes

Application Note 3835   CCFL Push-Pull Snubber Circuit
Application Note 3898   Calculator Simplifies Programming the Burst Dimming Stagger on the DS3994 Cold-Cathode Fluorescent Lamp (CCFL) Controller
Application Note 4135   Implementing Analog Dimming on the DS39xx CCFL Controllers
Application Note 4147   How to Modify the Soft-Start Profile of the DS3994
Application Note 4190   Enhancing the Gate-Drive Capacity of the DS39xx CCFL Controllers
Application Note 4637   Determining LCM and OVD Thresholds for the DS3xxx CCFL Controllers

Product Guides

Displays (PDF)

Reliability Reports

Reliability Report: DS3994.pdf

Software/Models

none

Ordering Information

Filters: Part Number: Package: Temperature: Tape and Reel Sample
Part Number Free
Sample
Buy Status Explanations for product status codes Package:
TYPE PINS FOOTPRINT
DRAWING  CODE/VAR *
Temp RoHS/Lead-Free?
Materials Analysis
DS3994Z+  
Active SOIC(W);28 pin;192.8 mm²
Outline Drawing:21-0042 (PDF)
Land Pattern: 90-0109 (PDF)
Use pkgcode/variation: W28+1*
-40°C to +85°C RoHS/Lead-Free: Lead Free
Materials Analysis
DS3994Z+T&R    
Active SOIC(W);28 pin;192.8 mm²
Outline Drawing:21-0042 (PDF)
Land Pattern: 90-0109 (PDF)
Use pkgcode/variation: W28+1*
-40°C to +85°C RoHS/Lead-Free: Lead Free
Materials Analysis
DS3994Z+W    
Active SOIC(W);28 pin;192.8 mm²
Outline Drawing:21-0042 (PDF)
Land Pattern: 90-0109 (PDF)
Use pkgcode/variation: W28+3*
-40°C to +85°C RoHS/Lead-Free: Lead Free
Materials Analysis

Notes:
  1. Other options and links for purchasing parts are listed at: http://www.maxim-ic.com/sales.
  2. Didn't Find What You Need? Ask our applications engineers. Expert assistance in finding parts, usually within one business day.
  3. Part number suffixes: T or T&R = tape and reel; + = RoHS/lead-free; # = RoHS/lead-exempt; -D = drypack; -U/+U on DS parts = cut tape. More: See Full Data Sheet or Maxim Product Naming Conventions.
  4. * Some packages have variations, listed on the drawing. "PkgCode/Variation" tells which variation the product uses. Note that "+", "#", "-" in the part number suffix describes RoHS status. Package drawings may show a different suffix character.

Similar Products by Function

DS3984 4-Channel Cold-Cathode Fluorescent Lamp Controller
DS3988 8-Channel Cold-Cathode Fluorescent Lamp Controller
See All CCFL Controllers (18 Products)

Similar Products by Application

Displays: LCD > CCFL Inverters with Analog Dimming Interface

More Information

New Product Press Release 2006-12-20 ]


Didn't Find What You Need?

Information Index

Rev 1; 2007-05-22
This page last modified: 2007-11-29


 


Contact Us     |     Privacy Policy     |     Legal Notices
Copyright © 2012 by Maxim Integrated Products