MAX9965, MAX9966

Quad, Low-Power, 500Mbps ATE Driver/Comparator

 Overview   Technical Documents   Ordering Info   Related Products   User Comments (0)   All   


Status Explanations for product status codes

Limited Availability

Description

The MAX9965/MAX9966 four-channel, low-power, high-speed pin electronics driver and comparator ICs include for each channel a three-level pin driver, comparator, and variable clamps. The MAX9965/MAX9966 are similar to the MAX9963/MAX9964, but with even lower window comparator dispersion for enhanced accuracy. The driver features a wide voltage range and high-speed operation, includes high-Z and active termination (3rd-level drive) modes, and is highly linear even at low-voltage swings. The dual bipolar-input comparator provides very low dispersion (timing variation) over a wide variety of input conditions. The clamps provide damping of high-speed DUT waveforms when the device is configured as a high-impedance receiver. High-speed, differential control inputs compatible with ECL, LVPECL, LVDS, and GTL levels are provided for each channel. ECL/LVPECL or flexible open-collector outputs are available for the comparators.

The A-grade version provides tight matching of gain and offset for the driver and comparator, allowing reference levels to be shared across multiple channels in cost-sensitive systems. For system designs that incorporate independent reference levels for each channel, the B-grade version is available at reduced cost.

Optional internal resistors at the high-speed inputs provide differential termination of LVDS inputs, while optional internal resistors provide the pullup voltage and source termination for open-collector comparator outputs. These features significantly reduce the discrete component count on the circuit board.

The MAX9965/MAX9966 operating range is -1.5V to +6.5V, with power dissipation of only 975mW per channel.

These devices are available in a 100-pin, 14mm x 14mm body, 0.5mm pitch TQFP with an exposed 8mm x 8mm die pad on the top (MAX9965) or bottom (MAX9966) of the package for efficient heat removal. The MAX9965/MAX9966 are specified to operate with an internal die temperature of +60°C to +100°C, and feature a die temperature monitor output.
 

Data Sheet

Download this datasheet in PDF formatDownload Rev 2 (PDF, 484kB)
Send this datasheet to any email addressE-Mail

Key Features

  • Small Footprint: Four Channels in 0.4in²
  • Low Power Dissipation: 975mW/Channel (typ)
  • High Speed: 500Mbps at 3VP-P
  • Very Low Timing Dispersion
  • Wide Operating Range: -1.5V to +6.5V
  • Active Termination (3rd-Level Drive)
  • Low-Leakage Mode: 15nA Maximum
  • Integrated Clamps
  • Interface Easily with Most Logic Families
  • Digitally Programmable Slew Rate
  • Internal Logic Termination Resistors
  • Low Gain and Offset Error
 

Applications/Uses

  • Low-Cost Mixed-Signal/System-on-Chip Testers
  • Memory Testers
  • Pattern/Data Generators
  • Structural Testers
   

Diagram

MAX9965, MAX9966: Block Diagram
Block Diagram

Product Guides

Interface (PDF)

Reliability Reports

Show FIT data for:
Request Reliability Report for:

Software/Models

none

Ordering Information

Filters: Part Number: Package: Temperature: Tape and Reel Sample
Part Number Free
Sample
Buy Status Explanations for product status codes Recommended Replacement Package:
TYPE PINS FOOTPRINT
DRAWING  CODE/VAR *
Temp RoHS/Lead-Free?
Materials Analysis
MAX9965BGCCQ+D    
Limited Availability MAX9963BGCCQ+D

 
TQFP;100 pin

Land Pattern: Not Available

0°C to +70°C See data sheet
MAX9965BGCCQ+TD    
Limited Availability MAX9963BGCCQ+D

 
TQFP;100 pin

Land Pattern: Not Available

0°C to +70°C See data sheet
MAX9965BGCCQ-D    
Limited Availability MAX9963BGCCQ+D

 
TQFP-EU;100 pin;256 mm²
Outline Drawing:21-0148 (PDF)
Land Pattern: 90-0159 (PDF)
Use pkgcode/variation: C100E-8R*
0°C to +70°C See data sheet
MAX9965BGCCQ-TD    
Limited Availability MAX9963BGCCQ+D

 
TQFP;100 pin

Land Pattern: Not Available

0°C to +70°C See data sheet
MAX9965BJCCQ+D    
Limited Availability MAX9963AJCCQ+D

 
TQFP;100 pin

Land Pattern: Not Available

0°C to +70°C See data sheet
MAX9965BJCCQ+TD    
Limited Availability MAX9963AJCCQ+D

 
TQFP;100 pin

Land Pattern: Not Available

0°C to +70°C See data sheet
MAX9965BJCCQ-D    
Limited Availability MAX9963AJCCQ+D

 
TQFP-EU;100 pin;256 mm²
Outline Drawing:21-0148 (PDF)
Land Pattern: 90-0159 (PDF)
Use pkgcode/variation: C100E-8R*
0°C to +70°C See data sheet
MAX9965BJCCQ-TD    
Limited Availability MAX9963AJCCQ+D

 
TQFP;100 pin

Land Pattern: Not Available

0°C to +70°C See data sheet
MAX9966AZCCQ    
Limited Availability MAX9963AJCCQ+D

 
TQFP-EP;100 pin;256 mm²
Outline Drawing:21-0116 (PDF)
Land Pattern: 90-0153 (PDF)
Use pkgcode/variation: C100E-2*
0°C to +70°C See data sheet
MAX9966AZCCQ-T    
Limited Availability MAX9963AJCCQ+D

 
TQFP;100 pin

Land Pattern: Not Available

0°C to +70°C See data sheet
Part Number Free
Sample
Buy Status Explanations for product status codes Recommended Replacement Package:
TYPE PINS FOOTPRINT
DRAWING  CODE/VAR *
Temp RoHS/Lead-Free?
Materials Analysis
MAX9966BGCCQ+D    
Limited Availability MAX9963BGCCQ+D

 
TQFP;100 pin

Land Pattern: Not Available

0°C to +70°C See data sheet
MAX9966BGCCQ+TD    
Limited Availability MAX9963BGCCQ+D

 
TQFP;100 pin

Land Pattern: Not Available

0°C to +70°C See data sheet
MAX9966BGCCQ-D    
Limited Availability MAX9963BGCCQ+D

 
TQFP-EP;100 pin;256 mm²
Outline Drawing:21-0116 (PDF)
Land Pattern: 90-0153 (PDF)
Use pkgcode/variation: C100E-2*
0°C to +70°C See data sheet
MAX9966BGCCQ-TD    
Limited Availability MAX9963BGCCQ+D

 
TQFP;100 pin

Land Pattern: Not Available

0°C to +70°C See data sheet

Notes:
  1. Other options and links for purchasing parts are listed at: http://www.maxim-ic.com/sales.
  2. Didn't Find What You Need? Ask our applications engineers. Expert assistance in finding parts, usually within one business day.
  3. Part number suffixes: T or T&R = tape and reel; + = RoHS/lead-free; # = RoHS/lead-exempt; -D = drypack; -U/+U on DS parts = cut tape. More: See Full Data Sheet or Maxim Product Naming Conventions.
  4. * Some packages have variations, listed on the drawing. "PkgCode/Variation" tells which variation the product uses. Note that "+", "#", "-" in the part number suffix describes RoHS status. Package drawings may show a different suffix character.

Similar Products by Function

MAX9963, MAX9964 Quad Low-Power 500Mbps ATE Driver/Comparator

Similar Products by Application

Automatic Test Equipment (ATE) > Driver/Comparator/Load Pin Electronics


Didn't Find What You Need?

Information Index

Overview

 

Technical Documents

 

Ordering Info

 

Related Products

 
Description
Key Features
Applications/Uses
Key Specifications
Diagram
Notes and Comments
  Data Sheet
Application Notes
Evaluation Kits
Product Guides
Reliability Reports
Software/Models
  Price and Availability
Samples
Buy Online
Package Information
Lead-Free Information
  Similar Products by Function
Similar Products by Application
Evaluation Kits
Products with Similar Part Numbers
Products Used With This
 
Document Ref.: 19-3016 Rev 2; 2006-06-07
This page last modified: 2009-10-08


 


Contact Us     |     Privacy Policy     |     Legal Notices
Copyright © 2012 by Maxim Integrated Products