DS5250

High-Speed Secure Microcontroller

 Overview   Technical Documents   Ordering Info   Related Products   User Comments (0)   All   


Status Explanations for product status codes

Active: In Production.

Description

The DS5250 is a highly secure, four clocks-per-machine cycle, 100% 8051-instruction-set-compatible microprocessor in Maxim's secure microcontroller family. It was designed to be the cryptographic engine of PIN pads, financial terminals, and any other application in which data security is paramount. A key feature of the device is that it encrypts its program memory and optionally its data memory with a hardware-based single-or triple-DES (data encryption standard) algorithm, making it almost impossible to extract information. It also implements block cipher encoding that uses block addresses to modify the encrypted data, further strengthening security. This makes the device ideal for storage and transmission of passwords, personal identification numbers, encryption keys, and other highly confidential information.

Note: Designers must have the following documents to fully use all the features of this device. This data sheet contains pin descriptions, feature overviews, and electrical specifications. Errata sheets contain deviations from published specifications. The user's guides offer detailed information about device features and operation.
 

Data Sheet

ABRIDGED DATA SHEET
Download this datasheet in PDF formatDownload Rev 4 (PDF, 60kB)
Request Full Data Sheet
An evaluation kit is available: DS5250-KIT

Key Features

  • Feature-Rich, 8051-Compatible Microprocessor
    • Accesses Up to 4MB Program and 4MB Data Memory (All Nonvolatile)
    • In-System Programmable Through Serial Port
    • In-Application Programmable Through User Software Allows Self-Modification of Program/Data Memory
    • Four 8-Bit Ports/One 6-Bit Port
    • Three 16-Bit Timer/Counters
    • 256 Bytes of Scratchpad RAM
  • Advanced Features
    • CRC-16/32 Generator
    • 5KB Internal SRAM (Optional 1KB Stack)
    • Single or 3DES Engine
    • Partitionable Memory Segments Variable from 4KB to 256KB
  • High-Speed Architecture
    • Four Clocks-per-Machine Cycle
    • DC-to-25MHz Operation
    • Single-Cycle Instruction in 160ns
    • Dual Data Pointers Can Increment or Decrement Independently
    • Automatic Data Pointer (DPTR) Selection Available
    • Programmable Speed MOVX Instructions
    • 1KB On-Chip Instruction Cache
  • High-Reliability Operation
    • Power-Fail/Overvoltage Reset
    • Early-Warning Power-Fail Interrupt
    • Watchdog Timer
  • Nonvolatile Functions
    • On-Chip Real-Time Clock with Alarm Interrupt
    • 2KB Battery-Backed Internal SRAM
  • Interrupts
    • 15 Interrupts with Seven External Sources
  • Security Features
    • Executes Single/3DES-Encrypted Programs to Prevent Observation
    • Two Self-Destruct Inputs
    • 4096-Bit Modulo-Arithmetic Accelerator (MAA) for Public/Private Key Operations
    • Tamper Sensors Detect Thermal/Voltage/Probe Attacks
    • Programmable Attack Countermeasures
    • Secure-Loader Mode
    • True Random-Number Generator (RNG)
    • Unique ID Number in Every Device
    • Separate Program/Data Cryptograph
    • Program Memory Integrity Checking
  • Evaluation Kit Available (DS5250-KIT)
  • Underwriters Laboratories (UL) Recognized
 

Applications/Uses

  • Applications that Require Data Security
  • Financial Terminals
  • PIN Pads
   

Key Specifications:

Microcontrollers
Part Number MCU Core Core Clock Speed
(MHz)
Data Processing Internal SRAM
(KBytes)
USARTs GPIO Pins Timer Features
max max
DS5250  8051 (CISC) 25 8-bit 5 2 38
RTC
Watchdog
See All Microcontrollers (38)
Pricing Notes:
This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific prices and delivery, please see the price and availability page or contact an authorized distributor.


Application Notes

Application Note 75   Using the High-Speed Micro's Serial Ports
Application Note 78   Using Power Management with High-Speed Microcontrollers
Application Note 79   Using the DS87C530/DS5250 Real-Time Clock
Application Note 89   High-Speed Micro Memory Interface Timing
Application Note 93   Design Guidelines for Microcontrollers Incorporating NV RAM
Application Note 137   Using a EconOscillator™ to Clock an 8051 Microprocessor
Application Note 595   8051 Microcontrollers: Frequently Asked Questions
Application Note 603   Implementing a Serial Port FIFO Using Dual Data Pointers
Application Note 605   Data Pointer Decrement Feature Simplifies Copy Operation for Overlapping Memory Buffers
Application Note 606   Configuring Keil PK51 Tools to Support 24-Bit Contiguous Addressing Mode
Application Note 1087   Micro Tutorial 1: Understanding DC Electrical Characteristics of Microcontrollers
Application Note 2033   SRAM-Based Microcontroller Optimizes Security
Application Note 2034   Using the DS5250 as a Drop-In Upgrade for the DS5002
Application Note 2035   The Fast 8051 Microcontroller: Leading the Way in Growth and Innovation
Application Note 2783   Using the Keil C Compiler for the DS5250
Application Note 3294   Increasing System Security by Using the DS5250 as a Secure Coprocessor
Application Note 3338   Using the Keil µVision Debugger with the DS52x0 Secure Microcontrollers
Application Note 3421   Interfacing 8051-based Microcontrollers to an SCI Port
Application Note 3824   Security in Embedded Systems
Application Note 4004   RSA Key Generation in DS5250
Application Note 4029   The DS8007 and Smart Card Interface Fundamentals
Application Note 4036   Getting Started with the DS8007 Evaluation Kit
Application Note 4095   Interfacing the DS5250 with a Magnetic Stripe Card Reader
Application Note 4120   Using the DS8007 In Smart-Card Transactions
Application Note 4273   Getting Started with the MAXQ1103 Evaluation Kit and the CrossWorks Compiler for the MAXQ30
Application Note 4312   Getting Started with the MAXQ1850 EV (Evaluation) Kit and the CrossWorks Compiler for the MAXQ30
Application Note 4347   RSA Key Generation Using the MAXQ1103 Microcontroller
Application Note 4399   Modulo Exponentiation Timing with the DS5250 Microcontroller
User Guide 4827   High-Speed Microcontroller User's Guide
User Guide 4830   High-Speed Microcontroller User's Guide: DS5250 Supplement

Reliability Reports

Reliability Report: DS5250.pdf
Underwriters Laboratories (UL) Recognized

Software/Models

none

Ordering Information

Filters: Part Number: Package: Temperature: Tape and Reel Sample
Part Number Free
Sample
Buy Status Explanations for product status codes Package:
TYPE PINS FOOTPRINT
DRAWING  CODE/VAR *
Temp RoHS/Lead-Free?
Materials Analysis
DS5250F-125    
Active MQFP;100 pin;436.2 mm²
Outline Drawing:21-0272 (PDF)
Land Pattern: 90-0290 (PDF)
Use pkgcode/variation: M100-4*
0°C to +70°C RoHS/Lead-Free: No
Materials Analysis
DS5250F-125+    
Active MQFP;100 pin;436.2 mm²
Outline Drawing:21-0272 (PDF)
Land Pattern: 90-0290 (PDF)
Use pkgcode/variation: M100+4*
0°C to +70°C RoHS/Lead-Free: Lead Free
Materials Analysis
DS5250F-1N5    
Active MQFP;100 pin;436.2 mm²
Outline Drawing:21-0272 (PDF)
Land Pattern: 90-0290 (PDF)
Use pkgcode/variation: M100-4*
-40°C to +85°C RoHS/Lead-Free: No
Materials Analysis
DS5250F-1N5+    
Active MQFP;100 pin;436.2 mm²
Outline Drawing:21-0272 (PDF)
Land Pattern: 90-0290 (PDF)
Use pkgcode/variation: M100+4*
0°C to +70°C RoHS/Lead-Free: Lead Free
Materials Analysis
DS5250F-825    
Active MQFP;80 pin;436.2 mm²
Outline Drawing:21-0271 (PDF)
Land Pattern: 90-0261 (PDF)
Use pkgcode/variation: M80-4*
0°C to +70°C RoHS/Lead-Free: No
Materials Analysis
DS5250F-825+    
Active MQFP;80 pin;436.2 mm²
Outline Drawing:21-0271 (PDF)
Land Pattern: 90-0261 (PDF)
Use pkgcode/variation: M80+4*
0°C to +70°C RoHS/Lead-Free: Lead Free
Materials Analysis
DS5250F-8N5    
Active MQFP;80 pin;436.2 mm²
Outline Drawing:21-0271 (PDF)
Land Pattern: 90-0261 (PDF)
Use pkgcode/variation: M80-4*
-40°C to +85°C RoHS/Lead-Free: No
Materials Analysis
DS5250F-8N5+    
Active MQFP;80 pin;436.2 mm²
Outline Drawing:21-0271 (PDF)
Land Pattern: 90-0261 (PDF)
Use pkgcode/variation: M80+4*
-40°C to +85°C RoHS/Lead-Free: Lead Free
Materials Analysis

Notes:
  1. Other options and links for purchasing parts are listed at: http://www.maxim-ic.com/sales.
  2. Didn't Find What You Need? Ask our applications engineers. Expert assistance in finding parts, usually within one business day.
  3. Part number suffixes: T or T&R = tape and reel; + = RoHS/lead-free; # = RoHS/lead-exempt; -D = drypack; -U/+U on DS parts = cut tape. More: See Full Data Sheet or Maxim Product Naming Conventions.
  4. * Some packages have variations, listed on the drawing. "PkgCode/Variation" tells which variation the product uses. Note that "+", "#", "-" in the part number suffix describes RoHS status. Package drawings may show a different suffix character.

Similar Products by Function

See All Microcontrollers (39 Products)

Similar Products by Application

Tamper-Proof UAV > Secure Microcontroller (µC)

Evaluation Kits

DS5250-KIT Evaluation Kit for the DS5250

Products with Similar Part Numbers

DS5250-KIT Evaluation Kit for the DS5250

More Information

Microcontroller Tool Kit Development Software
High-Speed Microcontroller User's Guide (PDF)
High-Speed Microcontroller User's Guide: DS5250 Supplement


Didn't Find What You Need?

Information Index

Rev 4; 2008-11-12
This page last modified: 2009-08-06


 


Contact Us     |     Privacy Policy     |     Legal Notices
Copyright © 2012 by Maxim Integrated Products