MAX1572

800mA, 2MHz, PWM DC-to-DC Step-Down Converter with Reset

800mA, Sub-1V, 2MHz, PWM, Step-Down DC-DC Uses Tiny 2.2µH Inductor, Includes Reset Output

 Overview   Technical Documents   Ordering Info   Related Products   User Comments (0)   All   


Status Explanations for product status codes

Active: In Production.

Description

The MAX1572 is a fixed-frequency, synchronous step-down DC-to-DC converter to power low-voltage microprocessor/DSP cores in portable equipment requiring high efficiency in a limited PC board area. The features are optimized for high efficiency over a wide load range, small external component size, low output ripple, and excellent transient response. The input supply voltage range is from 2.6V to 5.5V, while the output is internally fixed from 0.75V to 2.5V in 50mV increments with a guaranteed output current of 800mA. The high 2MHz switching allows tiny low-cost capacitors and a low-profile inductor, while the power-saving pulse-group mode reduces quiescent current to 48µA (typ) with light loads. To reduce noise and RF interference, the converter can be configured to provide forced-PWM operation.

The MAX1572 includes a low on-resistance internal MOSFET switch and synchronous rectifier to maximize efficiency and minimize external component count. No external diode is needed. Other features include soft-start to eliminate inrush current at startup and a 170ms (min) RESET-bar output to provide power-on/undervoltage reset. The MAX1572 is available in a 12-pin, 4mm x 4mm thin QFN package with exposed paddle.
 

Data Sheet

Download this datasheet in PDF formatDownload Rev 1 (PDF, 384kB)
Send this datasheet to any email addressE-Mail

My Maxim: Not Logged In
By logging in to My Maxim you can subscribe to alerts for this data sheet.

Login | Register
An evaluation kit is available: MAX1572EVKIT

Key Features

  • Up to 97% Efficiency
  • 2MHz PWM Switching
  • 800mA Guaranteed Output Current
  • Low 48µA Quiescent Current
  • Power-Saving Modes: Pulse-Group, Pulse-Skip, Forced-PWM Mode
  • 0.75V to 2.5V Preset Output Range (in 50mV Increments)
  • Voltage-Positioning Load Transients
  • 5mVP-P Output Ripple
  • Tiny 2.2µH Inductor
  • 10µF Ceramic Output Capacitor
  • Low 0.1µA Shutdown Current
  • No External Schottky Diode Required
  • Soft-Start with Zero Inrush Current
  • 170ms (min) active-low RESET Output
  • Small 12-Pin, 4mm x 4mm Thin QFN Package
 

Applications/Uses

  • Cell Phones/Smartphones
  • Digital Cameras and Camcorders
  • Handheld Instruments (PDAs, Palmtops)
  • MP3 and DVD Players
  • PCMCIA Cards
  • PDAs, Palmtops, and Notebook Computers
   

Key Specifications:

Step-Down Switching Regulators
Part Number VIN
(V)
VIN
(V)
VOUT
(V)
VOUT
(V)
Max. IOUT
(A)
Output Adjust. Method DC-DC Outputs Oper. Freq.
(kHz)
Package/Pins Smallest Available Pckg.
(mm2)
Budgetary Price
min max min max max w/pins See Notes
MAX1572  2.6 5.5 0.75 2.5 0.8 Digital/VID 1 2000
TQFN/12
16.8 $1.96 @1k
See All Step-Down Switching Regulators (288)
Pricing Notes:
This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific prices and delivery, please see the price and availability page or contact an authorized distributor.


Diagram

MAX1572: Typical Operating Circuit
Typical Operating Circuit

More Information

Topmark Coding MAX1572
New Product Press Release 2003-05-16 ]

Didn't Find What You Need?

Information Index

Document Ref.: 19-2837 Rev 1; 2004-12-06
This page last modified: 2010-05-27




Contact Us     |     Privacy Policy     |     Legal Notices     |     Distributor Portal
Copyright © 2012 by Maxim Integrated Products