MAX3430

±80V Fault-Protected, Fail-Safe, 1/4-Unit Load, +3.3V RS-485 Transceiver

±80V Fault-Protected, Fail-Safe, 1/4-Unit Load, +3.3V RS-485 Transceiver

 Overview   Technical Documents   Ordering Info   Related Products   User Comments (0)   All   


Status Explanations for product status codes

Active: In Production.

Description

The MAX3430 fault-protected RS-485 transceiver features ±80V protection from overvoltage signal faults on communication bus lines. Each device contains one driver and one receiver, and the output pins can withstand faults, with respect to ground, of up to ±80V. Even if the faults occur when the transceiver is active, shut down, or powered off, the device will not be damaged. The MAX3430 operates from a 3.3V supply and features a slew-rate-limited driver that minimizes EMI and reduces reflections caused by improperly terminated cables, allowing error-free data transmission at data rates up to 250kbps. The MAX3430 has a 1/4-unit-load receiver input impedance allowing up to 128 transceivers on a single bus and features fail-safe circuitry, which guarantees a logic-high receiver output when the receiver inputs are open.

Hot-swap circuitry eliminates false transitions on the data cable during circuit initialization or connection to a live backplane. Short-circuit current limiting and thermal- shutdown circuitry protect the driver against excessive power dissipation.

The MAX3430 is available in 8-pin SO and 8-pin PDIP packages, and is specified over commercial and industrial temperature ranges.
 

Data Sheet

Download this datasheet in PDF formatDownload Rev 1 (PDF, 244kB)
Send this datasheet to any email addressE-Mail

Key Features

  • ±80V Fault Protection
  • ±12kV ESD Protection
  • +3.3V Operation
  • Internal Slew-Rate Limiting
  • 250kbps Data Rate
  • Allows Up to 128 Transceivers on the Bus
  • -7V to +12V Common-Mode Input Voltage Range
  • True Fail-Safe Inputs
  • Hot-Swap Input Structure on DE
  • Available in 8-Pin SO and PDIP Packages
 

Applications/Uses

  • Industrial Control Local Area Networks
  • Lighting Systems
  • Multimaster RS-485 Networks
  • PROFIBUS Applications
  • RS-422/RS-485 Communications
   

Key Specifications:

RS-422/485 Line Driver/Receivers
Part Number Tx/Rx Duplex VSUPPLY
(V)
Fault Protect.
(±V)
ICC
(mA)
Data Rate
(kbps)
ESD Protect.
(±kV)
Tx EN Rx EN ICC (Shutdn.)
(µA)
Rx/Tx on Bus Package/Pins Budgetary Price
typ min typ See Notes
MAX3430  1Tx + 1Rx Half 3.3 80 3.5 250 12 Yes Yes 100 128
PDIP(N)/8
SOIC(N)/8
$2.45 @1k
See All RS-422/485 Line Driver/Receivers (165)
Pricing Notes:
This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific prices and delivery, please see the price and availability page or contact an authorized distributor.


Diagram

MAX3430: Typical Operating Circuit
Typical Operating Circuit

Application Notes

Tutorial 4697   Overview of Industrial Motor Control Systems

Product Guides

Interface (PDF)

Reliability Reports

Reliability Report: MAX3430.pdf
Show FIT data for:

Software/Models

none

Ordering Information

Filters: Part Number: Package: Temperature: Tape and Reel Sample
Part Number Free
Sample
Buy Status Explanations for product status codes Package:
TYPE PINS FOOTPRINT
DRAWING  CODE/VAR *
Temp RoHS/Lead-Free?
Materials Analysis
MAX3430CPA    
Active PDIP(N);8 pin;81.9 mm²
Outline Drawing:21-0043 (PDF)
Land Pattern: Not Applicable
Use pkgcode/variation: P8-4*
0°C to +70°C RoHS/Lead-Free: No
Materials Analysis
MAX3430CPA+  
Active PDIP(N);8 pin;81.9 mm²
Outline Drawing:21-0043 (PDF)
Land Pattern: Not Applicable
Use pkgcode/variation: P8+4*
0°C to +70°C RoHS/Lead-Free: Lead Free
Materials Analysis
MAX3430CSA    
Active SOIC(N);8 pin;30.9 mm²
Outline Drawing:21-0041 (PDF)
Land Pattern: 90-0096 (PDF)
Use pkgcode/variation: S8-5*
0°C to +70°C RoHS/Lead-Free: No
Materials Analysis
MAX3430CSA+  
Active SOIC(N);8 pin;30.9 mm²
Outline Drawing:21-0041 (PDF)
Land Pattern: 90-0096 (PDF)
Use pkgcode/variation: S8+5*
0°C to +70°C RoHS/Lead-Free: Lead Free
Materials Analysis
MAX3430CSA+T    
Active SOIC(N);8 pin;30.9 mm²
Outline Drawing:21-0041 (PDF)
Land Pattern: 90-0096 (PDF)
Use pkgcode/variation: S8+5*
0°C to +70°C RoHS/Lead-Free: Lead Free
Materials Analysis
MAX3430CSA-T    
Active N.SO;8 pin

Land Pattern: Not Available

0°C to +70°C See data sheet
MAX3430EPA    
Active PDIP(N);8 pin;81.9 mm²
Outline Drawing:21-0043 (PDF)
Land Pattern: Not Applicable
Use pkgcode/variation: P8-4*
-40°C to +85°C RoHS/Lead-Free: No
Materials Analysis
MAX3430EPA+  
Active PDIP(N);8 pin;81.9 mm²
Outline Drawing:21-0043 (PDF)
Land Pattern: Not Applicable
Use pkgcode/variation: P8+4*
-40°C to +85°C RoHS/Lead-Free: Lead Free
Materials Analysis
MAX3430ESA    
Active SOIC(N);8 pin;30.9 mm²
Outline Drawing:21-0041 (PDF)
Land Pattern: 90-0096 (PDF)
Use pkgcode/variation: S8-5*
-40°C to +85°C RoHS/Lead-Free: No
Materials Analysis
MAX3430ESA+  
Active SOIC(N);8 pin;30.9 mm²
Outline Drawing:21-0041 (PDF)
Land Pattern: 90-0096 (PDF)
Use pkgcode/variation: S8+5*
-40°C to +85°C RoHS/Lead-Free: Lead Free
Materials Analysis
Part Number Free
Sample
Buy Status Explanations for product status codes Package:
TYPE PINS FOOTPRINT
DRAWING  CODE/VAR *
Temp RoHS/Lead-Free?
Materials Analysis
MAX3430ESA+T    
Active SOIC(N);8 pin;30.9 mm²
Outline Drawing:21-0041 (PDF)
Land Pattern: 90-0096 (PDF)
Use pkgcode/variation: S8+5*
-40°C to +85°C RoHS/Lead-Free: Lead Free
Materials Analysis
MAX3430ESA-T    
Active SOIC(N);8 pin;30.9 mm²
Outline Drawing:21-0041 (PDF)
Land Pattern: 90-0096 (PDF)
Use pkgcode/variation: S8-5*
-40°C to +85°C RoHS/Lead-Free: No
Materials Analysis
MAX3430ESA/GG8    
Active SOIC(N);8 pin;30.9 mm²
Outline Drawing:21-0041 (PDF)
Land Pattern: 90-0096 (PDF)
Use pkgcode/variation: S8-5*
-40°C to +85°C RoHS/Lead-Free: No
Materials Analysis

Notes:
  1. Other options and links for purchasing parts are listed at: http://www.maxim-ic.com/sales.
  2. Didn't Find What You Need? Ask our applications engineers. Expert assistance in finding parts, usually within one business day.
  3. Part number suffixes: T or T&R = tape and reel; + = RoHS/lead-free; # = RoHS/lead-exempt; -D = drypack; -U/+U on DS parts = cut tape. More: See Full Data Sheet or Maxim Product Naming Conventions.
  4. * Some packages have variations, listed on the drawing. "PkgCode/Variation" tells which variation the product uses. Note that "+", "#", "-" in the part number suffix describes RoHS status. Package drawings may show a different suffix character.

Similar Products by Function

See All RS-422/485 Line Driver/Receivers (165 Products)

Similar Products by Application

Telecom Switches (PBX and Central Office) > Transceivers

More Information

New Product Press Release 2003-02-10 ]


Didn't Find What You Need?

Information Index

Document Ref.: 19-2756 Rev 1; 2003-05-26
This page last modified: 2007-08-03


 


Contact Us     |     Privacy Policy     |     Legal Notices
Copyright © 2012 by Maxim Integrated Products