|
|
|
MAX9471, MAX9472
Multiple Output Clock Generators with Dual PLLs and OTP
Bidirectional Composite Video Signal, Single-Supply Operation, Two Composite Inputs and Outputs
|
Status
Active: In Production.
Description
The MAX9471/MAX9472 multipurpose clock generators are ideal for consumer and communication applications. The MAX9471/MAX9472 feature two buffered phase-locked loop (PLL) outputs that can be independently set from 4MHz to 200MHz. These devices also provide one (MAX9472) or two (MAX9471) buffered outputs of the reference clock.
The MAX9471 outputs a set of MPEG/AC3 audio and video frequencies most commonly used in consumer applications. The MAX9472 outputs a set of common audio frequencies. These frequencies are selected through an I²C interface (MAX9471) or by setting the three-level FS pins. The MAX9471/MAX9472 feature a one-time-programmable (OTP) ROM, allowing one-time programming of the two PLL outputs.
The MAX9471/MAX9472 include two basic configurations. In one configuration, the OTP ROM sets PLL1 output to any frequency between 4MHz to 200MHz, and the I²C interface (MAX9471) or programmable pins set the PLL2 output frequency to a set of audio and video frequencies. In the other configuration, the OTP ROM sets both PLL1 and PLL2 frequencies to fixed values between 4MHz to 200MHz. In both cases, the reference output is available, but the OTP ROM can disable it.
The OTP ROM on the MAX9471/MAX9472 is factory set based on the customer requirements. Contact the factory for samples with preferred frequencies.
The devices operate from a 3.3V supply and are specified over the -40°C to +85°C extended temperature range. The MAX9471 is available in a 20-pin TQFN package. The MAX9472 is available in a 14-pin TSSOP package.
|
|
Data Sheet
|
Key Features
- 5MHz to 50MHz Input Clock Reference
- Crystal or Input-Clock-Based Reference
- Two Fractional-N Feedback PLLs (4MHz to 200MHz) with Buffered Outputs
- Two Buffered Outputs of Reference Clock
- OTP for Factory-Preset PLL Frequencies Available (Contact Factory)
- Programmable Through I²C Interface or Three-Level Logic Pins for Video or Audio Clocks
- Low-RMS Jitter PLL (14ps for 45MHz)
- Integrated VCXO with ±200ppm Tuning Range
- Available in 20-Pin TQFN and 14-Pin TSSOP Packages
- +3.3V Supply
- -40°C to +85°C Temperature Range
|
|
Applications/Uses
- Communication Systems
- Data Networking Systems
- Digital TVs
- Home Entertainment Centers
- Multimedia PCs
- Set-Top Boxes
|
|
|
|
Key Specifications:
| Clock Generators |
| Part Number |
Applications |
fIN
(MHz) |
fIN
(MHz) |
fOUT
(MHz) |
fOUT
(MHz) |
Fixed or Continuous Frequency |
Output Levels |
Out-
puts |
PLLs |
Program-
mability |
Spread Spectrum |
Output Jitter
(ps) |
VSUPPLY
(V) |
Package/Pins |
Budgetary Price |
| min |
max |
min |
max |
RMS |
See Notes |
| MAX9471 |
General Purpose |
5 |
50 |
4 |
200 |
Continuous |
LVCMOS |
4 |
2 |
Factory One-Time Programmable (OTP) |
No |
14 |
3.3 |
|
- |
| MAX9472 |
3 |
|
- |
|
See All Clock Generators (34)
|
Pricing Notes:
This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific prices and delivery, please see the price and availability page or contact an authorized distributor.
|
|
Diagram
 Typical Operating Circuit
Product Guides
Reliability Reports
| Show FIT data for: |
|
| Request Reliability Report for: |
|
Software/Models
Ordering Information
|
Part Number
|
Free
Sample |
Buy |
Status
|
Package:
TYPE PINS FOOTPRINT
DRAWING CODE/VAR *
|
Temp |
RoHS/Lead-Free?
Materials Analysis
|
| MAX9471ETP+
|
|
|
Active |
TQFN;20 pin;26 mm²
Outline Drawing:21-0140 (PDF)
Land Pattern: 90-0010 (PDF)
Use pkgcode/variation: T2055+5*
|
-40°C to +85°C
|
RoHS/Lead-Free: Lead Free
Materials Analysis |
| MAX9471ETP+T
|
|
|
Active |
QFN;
Land Pattern: Not Available
|
-40°C to +85°C
|
See data sheet
|
| MAX9472ETP
|
|
|
Active |
THNQFN;
Land Pattern: Not Available
|
-40°C to +85°C
|
See data sheet
|
Notes:
- Other options and links for purchasing parts are listed at: http://www.maxim-ic.com/sales.
- Didn't Find What You Need? Ask our applications engineers. Expert assistance in finding parts, usually within one business day.
- Part number suffixes: T or T&R = tape and reel; + = RoHS/lead-free; # = RoHS/lead-exempt; -D = drypack; -U/+U on DS parts = cut tape. More: See Full Data Sheet or Maxim Product Naming Conventions.
- * Some packages have variations, listed on the drawing. "PkgCode/Variation" tells which variation the product uses. Note that "+", "#", "-" in the part number suffix describes RoHS status. Package drawings may show a different suffix character.
|
Similar Products by Function
Similar Products by Application
Didn't Find What You Need?
Information Index
Document Ref.: 19-0524
Rev 1;
2006-08-09
This page last modified: 2010-11-30
|
|
|
Download
E-Mail