MAX1968, MAX1969

Power Drivers for Peltier TEC Modules

Smallest, EMI Optimized TEC Controller, Internal FETs, 0.01°C Temperature Control

 Overview   Technical Documents   Ordering Info   Related Products   User Comments (0)   All   


Status Explanations for product status codes

Active: In Production.

Description

The MAX1968/MAX1969 are highly integrated and cost-effective, high-efficiency, switch-mode drivers for Peltier thermoelectric cooler (TEC) modules. Both devices utilize direct current control to eliminate current surges in the TEC. On-chip FETs minimize external components while providing high efficiency. A 500kHz/1MHz switching frequency and a unique ripple cancellation scheme reduce component size and noise.

The MAX1968 operates from a single supply and provides bipolar ±3A output by biasing the TEC between the outputs of two synchronous buck regulators. Bipolar operation allows for temperature control without "dead zones" or other nonlinearities at low load currents. This arrangement ensures that the control system does not hunt when the set point is very close to the natural operating point, requiring a small amount of heating or cooling. An analog control signal precisely sets the TEC current. The MAX1969 provides unipolar output up to 6A. Reliability is optimized with settable limits for both TEC voltage and current, with independently set limits for heating and cooling current. An analog output also monitors TEC current.

The MAX1968/MAX1969 are available in a low-profile 28-pin TSSOP-EP package and is specified over the -40°C to +85°C temperature range. The thermally-enhanced TSSOP-EP package with exposed metal pad minimizes operating junction temperature. An evaluation kit is available to speed designs.
 

Data Sheet

Download this datasheet in PDF formatDownload Rev 2 (PDF, 456kB)
Send this datasheet to any email addressE-Mail
An evaluation kit is available: MAX1968EVKIT

Key Features

  • Direct Current Control Prevents TEC Current Surges
  • On-Chip Power MOSFETs
  • High-Efficiency Switch-Mode Design
  • Ripple Cancellation for Low Noise
  • No Dead-Zone or Hunting at Low-Output Current
  • Adjustable TEC Voltage Limit
  • Separately Adjustable Heating and Cooling Current Limits
  • ITEC Output Monitors TEC Current
  • 1% Accurate Voltage Reference
  • 500kHz/1MHz Switching Frequency
  • ±3A Output Current (MAX1968)
  • 6A Output Current (MAX1969)
  • Thermally Enhanced TSSOP-EP Package
 

Applications/Uses

  • Automated Test Equipment (ATE)
  • Biotech Lab Equipment
  • EDFA Optical Amplifiers
  • Fiber Optic Network Equipment
  • Fiber-Optic Laser Modules
  • Telecom Fiber Interfaces
  • WDM, DWDM Laser Diode Temperature Control
   

Key Specifications:

Multifunction PMICs
Part Number Primary Topology Monitor/Control Features DC-DC/Power Features VIN
(V)
VIN
(V)
VOUT
(V)
VOUT
(V)
Max. IOUT
(A)
Max. IOUT
(A)
Oper. Freq.
(kHz)
Inverting Outputs Package/Pins Smallest Available Pckg.
(mm2)
Budgetary Price
min max min max max w/pins See Notes
MAX1968  H-Bridge
Output OVP
Shutdown
Volt. or PWM Controlled Output
Adj. Frequency
Current Limit
Fixed Freq./PWM
Internal Pwr. FETs
Soft Start
Sync. Rectifier
TEC Driver
3 5.5 -4.3 4.3 3 3 1000 1
TSSOP-EP/28
63.7 $8.94 @1k
MAX1969  6 6
TSSOP-EP/28
$10.73 @1k
See All Multifunction PMICs (96)
Pricing Notes:
This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific prices and delivery, please see the price and availability page or contact an authorized distributor.


Diagram

MAX1968, MAX1969: Typical Operating Circuit
Typical Operating Circuit

Application Notes

Application Note 2931   HFTA-09.0: T3/E3/STS-1 Fiber Optic Extension
Application Note 3318   HFAN-08.2.0: How to Control and Compensate a Thermoelectric Cooler (TEC)

Reliability Reports

Reliability Report: MAX1968.pdf
Show FIT data for:
Request Reliability Report for:

Software/Models

none

Ordering Information

Filters: Part Number: Package: Temperature: Tape and Reel Sample
Part Number Free
Sample
Buy Status Explanations for product status codes Package:
TYPE PINS FOOTPRINT
DRAWING  CODE/VAR *
Temp RoHS/Lead-Free?
Materials Analysis
MAX1968EUI    
Active TSSOP-EP;28 pin;63.7 mm²
Outline Drawing:21-0108 (PDF)
Land Pattern: 90-0146 (PDF)
Use pkgcode/variation: U28E-4*
-40°C to +85°C RoHS/Lead-Free: No
Materials Analysis
MAX1968EUI+  
Active TSSOP-EP;28 pin;63.7 mm²
Outline Drawing:21-0108 (PDF)
Land Pattern: 90-0146 (PDF)
Use pkgcode/variation: U28E+4*
-40°C to +85°C RoHS/Lead-Free: Lead Free
Materials Analysis
MAX1968EUI+T    
Active TSSOP-EP;28 pin;63.7 mm²
Outline Drawing:21-0108 (PDF)
Land Pattern: 90-0146 (PDF)
Use pkgcode/variation: U28E+4*
-40°C to +85°C RoHS/Lead-Free: Lead Free
Materials Analysis
MAX1968EUI-T    
Active TSSOP;28 pin

Land Pattern: Not Available

-40°C to +85°C See data sheet
MAX1969EUI    
Active TSSOP-EP;28 pin;63.7 mm²
Outline Drawing:21-0108 (PDF)
Land Pattern: 90-0146 (PDF)
Use pkgcode/variation: U28E-4*
-40°C to +85°C RoHS/Lead-Free: No
Materials Analysis
MAX1969EUI+  
Active TSSOP-EP;28 pin;63.7 mm²
Outline Drawing:21-0108 (PDF)
Land Pattern: 90-0146 (PDF)
Use pkgcode/variation: U28E+4*
-40°C to +85°C RoHS/Lead-Free: Lead Free
Materials Analysis
MAX1969EUI+T    
Active TSSOP;28 pin

Land Pattern: Not Available

-40°C to +85°C See data sheet
MAX1969EUI-T    
Active TSSOP;28 pin

Land Pattern: Not Available

-40°C to +85°C See data sheet

Notes:
  1. Other options and links for purchasing parts are listed at: http://www.maxim-ic.com/sales.
  2. Didn't Find What You Need? Ask our applications engineers. Expert assistance in finding parts, usually within one business day.
  3. Part number suffixes: T or T&R = tape and reel; + = RoHS/lead-free; # = RoHS/lead-exempt; -D = drypack; -U/+U on DS parts = cut tape. More: See Full Data Sheet or Maxim Product Naming Conventions.
  4. * Some packages have variations, listed on the drawing. "PkgCode/Variation" tells which variation the product uses. Note that "+", "#", "-" in the part number suffix describes RoHS status. Package drawings may show a different suffix character.

Similar Products by Function

See All Multifunction PMICs (99 Products)

Evaluation Kits

MAX1968EVKIT Evaluation Kit for the MAX1968

Products with Similar Part Numbers

MAX1968EVKIT Evaluation Kit for the MAX1968

More Information

New Product Press Release 2002-05-21 ]


Didn't Find What You Need?

Information Index

Document Ref.: 19-2447 Rev 2; 2007-02-28
This page last modified: 2009-05-29


 


Contact Us     |     Privacy Policy     |     Legal Notices
Copyright © 2012 by Maxim Integrated Products