DS3150DK

Demo Kit for the DS3150 DS3/E3/STS-1 LIU

 Overview   Technical Documents   Ordering Info   Related Products   User Comments (0)   All   


Status Explanations for product status codes

Active: In Production.

Description

The DS3150DK is a small, self-contained evaluation kit for the DS3150 DS3/E3/STS-1 LIU. A soldered DS3150 and careful layout of the analog signal traces ensure maximum signal integrity. Jumpers on the board allow the user to configure the DS3150 in any mode. LEDs indicate VCC present, loss of signal, transmit driver failure, and PRBS sync. The board provides BNC connectors for the line-side transmit and receive differential pairs and a header for various system-side signals. On-board oscillators serve as local timing sources for DS3 and E3 operation. All jumpers, LEDs, and connectors are clearly labeled to make the board as easy as possible to use.
 

Data Sheet

Download this datasheet in PDF formatDownload Rev 1 (PDF, 440kB)
Send this datasheet to any email addressE-Mail

Key Features

  • Small size: approximately 3in x 4in
  • Soldered-down DS3150 in 48-pin TQFP package for best signal integrity
  • Line-side BNC connectors for Tx+/Tx- and Rx+/Rx- differential pairs
  • High-frequency 2:1 transformers on the transmit and receive differential pairs
  • Carefully designed layout for all analog signal paths
  • System-side connector for TCLK/TPOS/ TNEG, RCLK/RPOS/RNEG, MCLK, and PRBS supports external data source/sink
  • Jumpers to control EFE, ICE, active-low LBKS, LBO, RMON, TDS0, TDS1/OFSEL, TESS, active-low TTS and active-low ZCSE
  • Jumpers to connect TCLK to DS3 oscillator, E3 oscillator or connector pin
  • Jumpers to connect MCLK to DS3 oscillator, E3 oscillator, connector pin, VCC or ground
  • LEDs for active-low DM (red), active-low LOS (red), PRBS sync (green), and VDD (green)
  • Banana jack connectors for VDD and GND support use of lab power supplies
  • Silk-screened documentation for common hardware modes on bottom side of the board
   
   

Key Specifications:

T/E Carrier & Packetized Design Kits
Part Number Kit Product Line Kit Hardware Technical Documentation Budgetary Price
See Notes
DS3150DK  T3/E3/STS-1 Design Kit Main Board Data Sheet $515.00 @1
See All T/E Carrier & Packetized Design Kits (16)
Pricing Notes:
This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific prices and delivery, please see the price and availability page or contact an authorized distributor.


Didn't Find What You Need?

Information Index

Rev 1; 2002-07-11
This page last modified: 2009-10-05




Contact Us     |     Privacy Policy     |     Legal Notices
Copyright © 2012 by Maxim Integrated Products