|
MAX1185
Dual 10-Bit, 20Msps, +3V, Low-Power ADC with Internal Reference and Multiplexed Parallel Outputs
|
Status
Active: In Production.
Description
The MAX1185 is a 3V, dual 10-bit analog-to-digital converter (ADC) featuring fully-differential wideband track-and-hold (T/H) inputs, driving two pipelined, nine-stage ADCs. The MAX1185 is optimized for low-power, high dynamic performance applications in imaging, instrumentation, and digital communication applications. This ADC operates from a single 2.7V to 3.6V supply, consuming only 105mW while delivering a typical signal-to-noise ratio (SNR) of 59.5dB at an input frequency of 7.5MHz and a sampling rate of 20Msps. Digital outputs A and B are updated alternating on the rising (CHA) and falling (CHB) edge of the clock. The T/H driven input stages incorporate 400MHz (-3dB) input amplifiers. The converters may also be operated with single-ended inputs. In addition to low operating power, the MAX1185 features a 2.8mA sleep mode as well as a 1µA power-down mode to conserve power during idle periods.
An internal 2.048V precision bandgap reference sets the full-scale range of the ADC. A flexible reference structure allows the use of this internal or an externally derived reference, if desired for applications requiring increased accuracy or a different input voltage range. The MAX1185 features parallel, multiplexed, CMOS-compatible three-state outputs. The digital output format can be set to two's complement or straight offset binary through a single control pin. The device provides for a separate output power supply of 1.7V to 3.6V for flexible interfacing. The MAX1185 is available in a 7mm x 7mm, 48-pin TQFP package, and is specified for the extended industrial (-40°C to +85°C) temperature range.
Pin-compatible, nonmultiplexed. high-speed versions of the MAX1185 are also available. Refer to the MAX1180 data sheet for 105Msps, the MAX1181 data sheet for 80Msps, the MAX1182 data sheet for 65Msps, the MAX1183 data sheet for 40Msps, and the MAX1184 data sheet for 20Msps.
|
|
Data Sheet
|
An evaluation kit is available: MAX1181EVKIT
Key Features
- Single +3V Operation
- Excellent Dynamic Performance:
- 59.5dB SNR at fIN = 7.5MHz
- 74dB SFDR at fIN = 7.5MHz
- Low Power:
- 35mA (Normal Operation)
- 2.8mA (Sleep Mode)
- 1µA (Shutdown Mode)
- 0.02dB Gain and 0.25° Phase Matching
- Wide ±1VP-P Differential Analog Input Voltage Range
- 400MHz, -3dB Input Bandwidth
- On-Chip +2.048V Precision Bandgap Reference
- Single 10-Bit Bus for Multiplexed, Digital Outputs
- User-Selectable Output Format—Two's Complement or Offset Binary
- 48-Pin TQFP Package with Exposed Pad for Improved Thermal Dissipation
|
|
Applications/Uses
- High-Resolution Imaging
- I/Q Channel Digitization
- Instrumentation
- Multichannel IF Sampling
- Ultrasound
- Video Application
|
|
|
|
Key Specifications:
| High-Speed ADCs (> 5Msps) |
| Part Number |
Input Chan. |
Resolution
(bits) |
Sample Rate
(Msps) |
SFDR
(dBc) |
ENOB
(bits) |
SINAD
(dB) |
SNR
(dB) |
THD
(dB) |
INL
(±LSB) |
DNL
(±LSB) |
Full Pwr. BW
(MHz) |
Data Bus Interface |
Smallest Available Pckg.
(mm2) |
Budgetary Price |
| max ≥ |
min |
min |
min |
max w/pins |
See Notes |
| MAX1185 |
2 |
10 |
20 |
74 |
9.57 |
59.4 |
59.5 |
-72 |
1.5 |
1 |
400 |
µP/10 |
82.8 |
$4.97 @1k |
|
See All High-Speed ADCs (> 5Msps) (75)
|
Pricing Notes:
This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific prices and delivery, please see the price and availability page or contact an authorized distributor.
|
|
Diagram
Functional Diagram
Application Notes
Product Guides
Reliability Reports
| Show FIT data for: |
|
| Request Reliability Report for: |
|
Software/Models
Ordering Information
|
Part Number
|
Free
Sample |
Buy |
Status
|
Package:
TYPE PINS FOOTPRINT
DRAWING CODE/VAR *
|
Temp |
RoHS/Lead-Free?
Materials Analysis
|
| MAX1185ECM+D
|
|
|
Active |
TQFP-EP;48 pin;82.8 mm²
Outline Drawing:21-0065 (PDF)
Land Pattern: 90-0137 (PDF)
Use pkgcode/variation: C48E+7*
|
-40°C to +85°C
|
RoHS/Lead-Free: Lead Free
Materials Analysis |
| MAX1185ECM+TD
|
|
|
Active |
TQFP-EP;48 pin;82.8 mm²
Outline Drawing:21-0065 (PDF)
Land Pattern: 90-0137 (PDF)
Use pkgcode/variation: C48E+7*
|
-40°C to +85°C
|
RoHS/Lead-Free: Lead Free
Materials Analysis |
| MAX1185ECM-D
|
|
|
Active |
TQFP;48 pin
Land Pattern: Not Available
|
-40°C to +85°C
|
See data sheet
|
| MAX1185ECM-TD
|
|
|
Active |
TQFP;48 pin
Land Pattern: Not Available
|
-40°C to +85°C
|
See data sheet
|
| MAX1185ECM/V+
|
|
|
Active |
TQFP-EP;48 pin;82.8 mm²
Outline Drawing:21-0065 (PDF)
Land Pattern: 90-0137 (PDF)
Use pkgcode/variation: C48E+7*
|
-40°C to +85°C
|
RoHS/Lead-Free: Lead Free
Materials Analysis |
| MAX1185ECM/V+T
|
|
|
Active |
TQFP-EP;48 pin;82.8 mm²
Outline Drawing:21-0065 (PDF)
Land Pattern: 90-0137 (PDF)
Use pkgcode/variation: C48E+7*
|
-40°C to +85°C
|
RoHS/Lead-Free: Lead Free
Materials Analysis |
Notes:
- Other options and links for purchasing parts are listed at: http://www.maxim-ic.com/sales.
- Didn't Find What You Need? Ask our applications engineers. Expert assistance in finding parts, usually within one business day.
- Part number suffixes: T or T&R = tape and reel; + = RoHS/lead-free; # = RoHS/lead-exempt; -D = drypack; -U/+U on DS parts = cut tape. More: See Full Data Sheet or Maxim Product Naming Conventions.
- * Some packages have variations, listed on the drawing. "PkgCode/Variation" tells which variation the product uses. Note that "+", "#", "-" in the part number suffix describes RoHS status. Package drawings may show a different suffix character.
|
Similar Products by Function
Evaluation Kits
Didn't Find What You Need?
Information Index
Document Ref.: 19-2175
Rev 3;
2011-05-23
This page last modified: 2011-05-23
|
Download
E-Mail