MAX5742

12-Bit, Low-Power, Quad, Voltage-Output DAC with Serial Interface

 Overview   Technical Documents   Ordering Info   Related Products   User Comments (0)   All   


Status Explanations for product status codes

Active: In Production.

Description

The MAX5742 quad, 12-bit, low-power, buffered voltage-output, digital-to-analog converter (DAC) is packaged in a space-saving 10-pin µMAX® package (5mm x 3mm). The wide supply voltage range of +2.7V to +5.5V and 229µA supply current accommodates low-power and low-voltage applications. DAC outputs employ on-chip precision output amplifiers that swing rail-to-rail. The MAX5742's reference input accepts a voltage range from 0 to VDD. In power-down the reference input is high impedance, further reducing the system's total power consumption.

The 20MHz, 3-wire SPI™, QSPI™, MICROWIRE™ and DSP-compatible serial interface saves board space and reduces the complexity of opto- and transformer-isolated applications. The MAX5742 on-chip power-on reset (POR) circuit resets the DAC outputs to zero and loads the output with a 100kΩ resistor to ground. This provides additional safety for applications that drive valves or other transducers that need to be off on power-up. The MAX5742's software-controlled power-down reduces supply current to less than 0.3µA and provides software-selectable output loads (1kΩ, 100kΩ, or high impedance) while in power-down. The MAX5742 is specified over the -40°C to +125°C automotive temperature range.
 

Data Sheet

Download this datasheet in PDF formatDownload Rev 2 (PDF, 688kB)
Send this datasheet to any email addressE-Mail

Key Features

  • Ultra-Low Power Consumption
    • 229µA at VDD = +3.6V
    • 271µA at VDD = +5.5V
  • Wide +2.7V to +5.5V Single-Supply Range
  • 10-Pin µMAX Package
  • 0.3µA Power-Down Current
  • Guaranteed 12-Bit Monotonicity (±1 LSB DNL)
  • Safe Power-Up Reset to Zero Volts at DAC Output
  • Three Software-Selectable Power-Down Impedances (100kΩ, 1kΩ, Hi-Z)
  • Fast 20MHz 3-Wire SPI, QSPI, and MICROWIRE-Compatible Serial Interface
  • Rail-to-Rail Output Buffer Amplifiers
  • Schmitt-Triggered Logic Inputs for Direct Interfacing to Optocouplers
  • Wide -40°C to +125°C Operating Temperature Range
 

Applications/Uses

  • Automatic Tuning
  • Battery-Powered Instruments
  • Gain and Offset Adjustment
  • Power Amplifier Control
  • Process-Control I/O Boards
  • VCO Control
   

Key Specifications:

Precision DACs (12-16 Bits)
Part Number Resolution
(bits)
Channels Output Type Reference INL
(±LSB)
Interface Supply Range
(V)
Supply Range
(V)
Oper. Temp.
(°C)
Budgetary Price
max min max See Notes
MAX5742  12 4 Voltage- Buffered Ext. 16 Serial - SPI 2.7 5.5
-40 to +85
-40 to +125
$7.36 @1k
See All Precision DACs (12-16 Bits) (247)
Pricing Notes:
This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific prices and delivery, please see the price and availability page or contact an authorized distributor.

Precision DACs (4-12 Bits)
Part Number Resolution
(bits)
Channels Output Type Reference INL
(±LSB)
Interface Supply Range
(V)
Supply Range
(V)
Oper. Temp.
(°C)
Budgetary Price
max min max See Notes
MAX5742  12 4 Voltage- Buffered Ext. 16 Serial - SPI 2.7 5.5
-40 to +85
-40 to +125
$7.36 @1k
See All Precision DACs (4-12 Bits) (267)
Pricing Notes:
This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific prices and delivery, please see the price and availability page or contact an authorized distributor.


Diagram

MAX5742: Functional Block Diagram
Functional Block Diagram

Product Guides

Signal Chain (PDF)

Reliability Reports

Reliability Report: MAX5742.pdf
Show FIT data for:

Software/Models

none

Ordering Information

Filters: Part Number: Package: Temperature: Tape and Reel Sample
Part Number Free
Sample
Buy Status Explanations for product status codes Package:
TYPE PINS FOOTPRINT
DRAWING  CODE/VAR *
Temp RoHS/Lead-Free?
Materials Analysis
MAX5742AUB    
Active µMAX;10 pin;15.4 mm²
Outline Drawing:21-0061 (PDF)
Land Pattern: 90-0330 (PDF)
Use pkgcode/variation: U10CN-1*
-40°C to +125°C RoHS/Lead-Free: No
Materials Analysis
MAX5742AUB+  
Active µMAX;10 pin;15.4 mm²
Outline Drawing:21-0061 (PDF)
Land Pattern: 90-0330 (PDF)
Use pkgcode/variation: U10CN+1*
-40°C to +125°C RoHS/Lead-Free: Lead Free
Materials Analysis
MAX5742AUB+T    
Active µMAX;10 pin;15.4 mm²
Outline Drawing:21-0061 (PDF)
Land Pattern: 90-0330 (PDF)
Use pkgcode/variation: U10CN+1*
-40°C to +125°C RoHS/Lead-Free: Lead Free
Materials Analysis
MAX5742AUB-T    
Active µMAX;10 pin;15.4 mm²
Outline Drawing:21-0061 (PDF)
Land Pattern: 90-0330 (PDF)
Use pkgcode/variation: U10CN-1*
-40°C to +125°C RoHS/Lead-Free: No
Materials Analysis
MAX5742EUB    
Active µMAX;10 pin;15.4 mm²
Outline Drawing:21-0061 (PDF)
Land Pattern: 90-0330 (PDF)
Use pkgcode/variation: U10CN-1*
-40°C to +85°C RoHS/Lead-Free: No
Materials Analysis
MAX5742EUB+  
Active µMAX;10 pin;15.4 mm²
Outline Drawing:21-0061 (PDF)
Land Pattern: 90-0330 (PDF)
Use pkgcode/variation: U10CN+1*
-40°C to +85°C RoHS/Lead-Free: Lead Free
Materials Analysis
MAX5742EUB+T    
Active µMAX;10 pin;15.4 mm²
Outline Drawing:21-0061 (PDF)
Land Pattern: 90-0330 (PDF)
Use pkgcode/variation: U10CN+1*
-40°C to +85°C RoHS/Lead-Free: Lead Free
Materials Analysis
MAX5742EUB-T    
Active uMAX;10 pin

Land Pattern: Not Available

-40°C to +85°C See data sheet

Notes:
  1. Other options and links for purchasing parts are listed at: http://www.maxim-ic.com/sales.
  2. Didn't Find What You Need? Ask our applications engineers. Expert assistance in finding parts, usually within one business day.
  3. Part number suffixes: T or T&R = tape and reel; + = RoHS/lead-free; # = RoHS/lead-exempt; -D = drypack; -U/+U on DS parts = cut tape. More: See Full Data Sheet or Maxim Product Naming Conventions.
  4. * Some packages have variations, listed on the drawing. "PkgCode/Variation" tells which variation the product uses. Note that "+", "#", "-" in the part number suffix describes RoHS status. Package drawings may show a different suffix character.

Similar Products by Function

See All Precision DACs (12-16 Bits) (247 Products)
See All Precision DACs (4-12 Bits) (267 Products)


Didn't Find What You Need?

Information Index

Overview

 

Technical Documents

 

Ordering Info

 

Related Products

 
Description
Key Features
Applications/Uses
Key Specifications
Diagram
Notes and Comments
  Data Sheet
Application Notes
Evaluation Kits
Product Guides
Reliability Reports
Software/Models
  Price and Availability
Samples
Buy Online
Package Information
Lead-Free Information
  Similar Products by Function
Similar Products by Application
Evaluation Kits
Products with Similar Part Numbers
Products Used With This
 
Document Ref.: 19-2122 Rev 2; 2003-08-22
This page last modified: 2009-05-13


 


Contact Us     |     Privacy Policy     |     Legal Notices
Copyright © 2012 by Maxim Integrated Products