|
DS2432
1Kb Protected 1-Wire EEPROM with SHA-1 Engine
|
Status
Description
The DS2432 combines 1024 bits of EEPROM, a 64-bit secret, an 8-byte register/control page with up to five user read/write bytes, a 512-bit SHA-1 engine, and a fully-featured 1-Wire interface in a single chip. Each DS2432 has its own 64-bit ROM registration number that is factory lasered into the chip to provide a guaranteed unique identity for absolute traceability. Data is transferred serially via the 1-Wire protocol, which requires only a single data lead and a ground return. The DS2432 has an additional memory area called the scratchpad that acts as a buffer when writing to the main memory, the register page or when installing a new secret. Data is first written to the scratchpad from where it can be read back. After the data has been verified, a copy scratchpad command will transfer the data to its final memory location, provided that the DS2432 receives a matching 160-Bit MAC. The computation of the MAC involves the secret and additional data stored in the DS2432 including the device's registration number. Only a new secret can be loaded without providing a MAC. The SHA-1 engine can also be activated to compute 160-bit message authentication codes (MAC) when reading a memory page or to compute a new secret, instead of loading it. Applications of the DS2432 include intellectual property security, after-market management of consumables, and tamper-proof data carriers.
|
|
Data Sheet
|
An evaluation kit is available: DS9090K
Key Features
- 1128 Bits of 5V EEPROM Memory Partitioned Into Four Pages of 256 Bits, a 64-Bit Write-Only Secret, and Up to Five General-Purpose Read/Write Registers
- On-Chip 512-Bit ISO/IEC 10118-3 SHA-1 Engine to Compute 160-Bit Message Authentication Codes (MACs) and to Generate Secrets
- Write Access Requires Knowledge of the Secret and the Capability of Computing and Transmitting a 160-Bit MAC as Authorization
- Secret and Data Memory Can Be Write Protected (All or Page 0 Only) or Put in EPROM-Emulation Mode ("Write to 0", Page 1)
- Unique, Factory-Lasered and Tested 64-Bit Registration Number Assures Absolute Traceability Because No Two Parts Are Alike
- Built-In Multidrop Controller Ensures Compatibility with Other 1-Wire® Net Products
- Reduces Control, Address, Data, and Power to a Single Data Pin
- Directly Connects to a Single Port Pin of a Microprocessor and Communicates at Up to 15.3kbps
- Overdrive Mode Boosts Communication Speed to 125kbps
- Low-Cost 6-Lead TSOC Surface-Mount Package or Solder-Bumped UCSP™ Package
- Reads and Writes Over a Wide Voltage Range of 2.8V to 5.25V from -40°C to +85°C
|
|
Applications/Uses
- Device Authentication
- IEEE 1451.4 Sensor TEDS
- Ink/Toner Cartridges
- Medical Sensors
- PCB Identification
- Self-Configuration of Central Office Switches, Wireless Base Stations, PBXs, or other Modular-Based Rack Systems
|
|
|
|
Key Specifications:
| Memory (EPROM, EEPROM, ROM, NV SRAM) |
| Part Number |
Memory Type |
Memory Size |
Bus Type |
Real Time Clock |
DIP w/Int. Batt. |
Pwr. Cap Pckg. |
Battery Monitor |
GPIO |
VSUPPLY
(V) |
VSUPPLY
(V) |
| min |
max |
| DS2432 |
EEPROM |
1K x 1 |
1-Wire |
No |
No |
No |
No |
No |
2.8 |
5.5 |
|
See All Memory (EPROM, EEPROM, ROM, NV SRAM) (58)
|
Pricing Notes:
This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific prices and delivery, please see the price and availability page or contact an authorized distributor.
|
|
Application Notes
Product Guides
Reliability Reports
Software/Models
Ordering Information
|
Part Number
|
Free
Sample |
Buy |
Status
|
Recommended Replacement |
Package:
TYPE PINS FOOTPRINT
DRAWING CODE/VAR *
|
Temp |
RoHS/Lead-Free?
Materials Analysis
|
| DS2432P
|
|
N/A |
No Longer Available |
DS2432P+
|
TSOC;6 pin;17.8 mm²
Outline Drawing:21-0382 (PDF)
Land Pattern: 90-0321 (PDF)
Use pkgcode/variation: D6-1*
|
-40°C to +85°C
|
RoHS/Lead-Free: No
Materials Analysis |
| DS2432P+
|
|
|
Active |
|
TSOC;6 pin;17.8 mm²
Outline Drawing:21-0382 (PDF)
Land Pattern: 90-0321 (PDF)
Use pkgcode/variation: D6+1*
|
-40°C to +85°C
|
RoHS/Lead-Free: Lead Free
Materials Analysis |
| DS2432P+T&R
|
|
|
Active |
|
TSOC;6 pin;17.8 mm²
Outline Drawing:21-0382 (PDF)
Land Pattern: 90-0321 (PDF)
Use pkgcode/variation: D6+1*
|
-40°C to +85°C
|
RoHS/Lead-Free: Lead Free
Materials Analysis |
| DS2432P/T&R
|
|
N/A |
No Longer Available |
DS2432P+T&R
|
TSOC;6 pin;17.8 mm²
Outline Drawing:21-0382 (PDF)
Land Pattern: 90-0321 (PDF)
Use pkgcode/variation: D6-1*
|
-40°C to +85°C
|
RoHS/Lead-Free: No
Materials Analysis |
| DS2432X
|
|
N/A |
No Longer Available |
|
WLCSP;8 pin;4.8 mm²
Outline Drawing:21-0374 (PDF)
Land Pattern: Not Available
Use pkgcode/variation: BR823-1*
|
-40°C to +85°C
|
See data sheet
|
| DS2432X+
|
|
N/A |
No Longer Available |
DS2432X-S+
|
WLCSP;8 pin;4.8 mm²
Outline Drawing:21-0373 (PDF)
Land Pattern: Not Available
Use pkgcode/variation: BR823+1*
|
-40°C to +85°C
|
RoHS/Lead-Free: Lead Free
Materials Analysis |
| DS2432X+U
|
|
|
Active |
|
WLCSP;8 pin;4.8 mm²
Outline Drawing:21-0373 (PDF)
Land Pattern: Not Available
Use pkgcode/variation: BR823+1*
|
-40°C to +85°C
|
RoHS/Lead-Free: Lead Free
Materials Analysis |
| DS2432X-S
|
|
N/A |
No Longer Available |
|
WLCSP;8 pin;4.8 mm²
Outline Drawing:21-0374 (PDF)
Land Pattern: Not Available
Use pkgcode/variation: BR823-1*
|
-40°C to +85°C
|
See data sheet
|
| DS2432X-S+
|
|
|
Active |
|
WLCSP;8 pin;4.8 mm²
Outline Drawing:21-0373 (PDF)
Land Pattern: Not Available
Use pkgcode/variation: BR823+1*
|
-40°C to +85°C
|
RoHS/Lead-Free: Lead Free
Materials Analysis |
Notes:
- Other options and links for purchasing parts are listed at: http://www.maxim-ic.com/sales.
- Didn't Find What You Need? Ask our applications engineers. Expert assistance in finding parts, usually within one business day.
- Part number suffixes: T or T&R = tape and reel; + = RoHS/lead-free; # = RoHS/lead-exempt; -D = drypack; -U/+U on DS parts = cut tape. More: See Full Data Sheet or Maxim Product Naming Conventions.
- * Some packages have variations, listed on the drawing. "PkgCode/Variation" tells which variation the product uses. Note that "+", "#", "-" in the part number suffix describes RoHS status. Package drawings may show a different suffix character.
|
Similar Products by Function
Similar Products by Application
| 802.11a/b/g Wireless LAN > PCB ID, Silicon Label and Address |
| Broadcast TV and Radio > PCB ID, Silicon Label and Address |
| Cable Modems and CATV > PCB ID, Silicon Label and Address |
| GPS Solutions > PCB ID, Silicon Label and Address |
| Ink Jet/Laser Jet > Ink Cartridge Authentication |
| Transport Nodes, Access Nodes, Add/Drop Multiplexers, and Digital Cross-Connects > Module Identification |
| Transport Nodes, Access Nodes, Add/Drop Multiplexers, and Digital Cross-Connects > System Autoconfiguration |
Evaluation Kits
| DS9090K |
1-Wire Device Evaluation Kit Rev B4 |
More Information
Didn't Find What You Need?
Information Index
Rev 5;
2010-02-24
This page last modified: 2010-03-18
|
Download