|
DS2430A
256-Bit 1-Wire EEPROM
|
Status
| Part Number |
Status |
Replacement |
Explanation |
|
DS2430A
|
Active: In Production. But some versions of the family are Not Recommended for New Designs. See Ordering Information. | DS2431
| The DS2430A is no longer recommended for new design. We are suggesting the DS2431 1024-Bit 1-Wire EEPROM as a replacement.
|
Description
The DS2430A 256-bit 1-Wire® EEPROM identifies and stores relevant information about the product to which it is associated. This lot or product specific information can be accessed with minimal interface, for example a single port pin of a microcontroller. The DS2430A consists of a factory-lasered registration number that includes a unique 48-bit serial number, an 8-bit CRC, and an 8-bit Family Code (14h) plus 256 bits of user-programmable EEPROM and a 64-bit one-time programmable application register. The power to read and write the DS2430A is derived entirely from the 1-Wire communication line. Data is
transferred serially via the 1-Wire protocol, which requires only a single data lead and a ground return. The 48-bit serial number that is factory-lasered into each DS2430A provides a guaranteed unique identity that allows for absolute traceability. The TO-92 and TSOC packages provide a compact enclosure that
allows standard assembly equipment to handle the device easily for attachment to printed circuit boards or wiring. Typical applications include storage of calibration constants, board identification, and product revision status.
|
|
Data Sheet
|
Key Features
- 256-bit Electrically Erasable Programmable Read Only Memory (EEPROM) plus 64-bit one-time programmable application register
- Unique, factory-lasered and tested 64-bit registration number (8-bit family code + 48-bit serial number + 8-bit CRC tester) assures absolute identity because no two parts are alike
- Built-in multidrop controller ensures compatibility with other MicroLAN products
- EEPROM organized as one page of 32 bytes for random access
- Reduces control, address, data, and power to a single data pin
- Directly connects to a single port pin of a microprocessor and communicates at up to 15.3kbits per second
- 8-bit family code specifies DS2430A communication requirements to reader
- Presence detector acknowledges when reader first applies voltage
- Low cost TO-92 or 6-pin TSOC and UCSP surface mount package
- Reads and writes over a wide voltage range of 2.8V to 5.25V from -40°C to +85°C
|
|
Applications/Uses
- Accessory Identification and Control
- IEEE 1451.4 Sensor TEDS
- Medical Sensors
- PCB Identification
|
|
|
|
Key Specifications:
| Memory (EPROM, EEPROM, ROM, NV SRAM) |
| Part Number |
Memory Type |
Memory Size |
Bus Type |
Real Time Clock |
DIP w/Int. Batt. |
Pwr. Cap Pckg. |
Battery Monitor |
GPIO |
VSUPPLY
(V) |
VSUPPLY
(V) |
Budgetary Price |
| min |
max |
See Notes |
| DS2430A |
EEPROM |
32 Bytes |
1-Wire |
No |
No |
No |
No |
No |
2.8 |
5.25 |
$1.12 @1k |
|
See All Memory (EPROM, EEPROM, ROM, NV SRAM) (58)
|
Pricing Notes:
This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific prices and delivery, please see the price and availability page or contact an authorized distributor.
|
|
More Information
Didn't Find What You Need?
Information Index
Document Ref.: 19-5236
Rev 7;
2012-03-12
This page last modified: 2012-03-12
|
Download
E-Mail